Description
Included in this kit
This bundle includes 1x Alpine HCE-RCAM-WRA Spare Tire Rear View Camera System for Jeep 2007-2018 Wrangler JK, and 1x Alpine HCE-C2600FD Multi-View Front HDR Camera System.
1x Alpine HCE-RCAM-WRA Spare Tire Rear View Camera System for Jeep 2007-2018 Wrangler JK - (HCE-RCAM-WRA)
Alpine HCE-RCAM-WRA Spare Tire Rear View Camera System for 2007-2018 ® Wrangler JK
The HCE-RCAM-WRA is an adjustable HDR rear-view camera system that mounts behind the spare tire of the 2007-2018 Jeep Wrangler JK.
Easy, Add-On Camera System
The HCE-RCAM-WRA lets you easily add an Alpine rear-view camera to your 2007-2018 Jeep Wrangler JK. It is compatible with Alpine in-dash screen systems, the factory Jeep screen or other aftermarket screens. If used with the factory screen, you can add the Alpine SGS-CH01 Camera Interface (sold separately) with Active Guide Lines, – without factory screen re-programming..
Versatile Installation
With tons of wheel choices for the Wrangler, you need a versatile camera that works with any of them. The HCE-RCAM-WRA consists of the HCE-C1100 Rear-View Camera and bracket that is mounted between the spare tire and the Wrangler’s 5x5 wheel pattern. The upper portion of the bracket can be positioned to the left or right of the wheel’s spokes, ensuring that the attached camera has a clear line of sight behind the vehicle and is not blocked by the wheel.
HDR Technology
Backing out of garages or riding through shady trails can be tough on a back-up camera. Standard cameras have difficulty managing changes in light, causing images to wash out and making it difficult to see what’s behind you at times. The HCE-RCAM-WRA has High Dynamic Range (HDR) technology for improved image quality. HDR technology can manage a wider range of luminance through the camera’s sensor as compared to standard cameras. Bright and dark areas are captured and adjusted for even exposure and white balance, preventing the image from being washed-out or too dark as you drive between sunlight and low-light conditions.
1x Alpine HCE-C2600FD Multi-View Front HDR Camera System - (HCE-C2600FD)
Designed for use with Alpine Touch-Screen Receivers
First Alpine Cameras with HDR!
The new CMOS image sensors have HDR which allows very large variances in light to be handled without washing out the image or being too dark.
4 different viewing angles for up to 180°of vision left and right making it easy to what’s lurking around the corner, behind you.
Great for X209-WRA 9" Jeep Wrangler Restyle Receivers.
With the new Off—Road UI for X209-WRA, you’re able to navigated through tough maneuvers while monitoring tilt and position.
Power Requirements - 6.0v Dc
Ground Type - Negative Ground Type
Max Power Consumption - 1.2w @ 6v
Output Image - Normal Image, Cvbs (NTSC Video Signal) Image Output For 16:9 Wide-Screen
Image Output Impedance - 75 Ohms (1vp-p)
Image Sensor - 1/4 Inch Cmos Image Sensor, 4:3 Aspect Ratio
Effective Number Of Pixels - 1280 X 960 - 1.2 Megapixels
Lens Section - Focal Length F=1.27mm, Brightness F=1.8
Angle Of Field - Approximately 180° Horizontally, Approximately 70° Vertically
Automatic Image Adjusting Function - Automatic Exposure Adjustment, Automatic White Balance Adjustment
Syncronization System - Internal Synchronization
Luminance S/N - 8.41 Lx
Resolution (horizontal) - 330 Tv Lines Or More
Illumination Range - Approximately 1.5lx To 100klx
Operating Temperature Range - 158°F To -22°F
Water Resistance - Ip68
