Alpine Status HDA-M80 Hi-Res Mono Subwoofer Amplifier & Alpine R2-S653 R-Series Pro 3-Way Component Speaker Set Bundle

This bundle includes 1x Alpine R2-S653 6.5" R-Series Pro High-Resolution 3-Way Component Speaker Set, Pair, and 1x Alpine Status HDA-M80 Hi-Res Mono Subwoofer Amplifier, 500W x 1 at 4-Ohm, 800W x 1 at 2-Ohm.

1x Alpine R2-S653 6.5" R-Series Pro High-Resolution 3-Way Component Speaker Set, Pair - (R2-S653)

If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.

The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.

3-Way Component PRO Speaker -
The R2-S653 is the top of the line of the new 2022 R-Series speaker line-up. It features a 16,5cm door woofer, 9,6cm mid-range speaker and a 4,3cm tweeter with up to 40kHz frequency response.

Glass-Fiber Reinforced Cone -
The door woofer and the mid-range speaker feature all-new glass-fiber reinforced cones. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.

Features -
• 16.5cm Door Woofer (2pcs) / 9,6cm Mid-Range (2pcs) / 4,3cm Hard-Dome Tweeter (2pcs)
• Die-Cast Aluminum Baskets (Door Woofer / Mid-Range)
• Magnesium Hard-Dome Tweeters (Flush-Mount / On-Dash Mounting Options)
• Glass-Fiber Reinforced Cone (Door Woofer / Mid-Range)
• Flexible PRO X-Over Networks
• Included Speaker Grills

Specifications -
• Maximum Peak Power: 300 Watts
• Maximum RMS Power: 100 Watts
• Nominal Impedance: 4 Ohm
• Frequency Response: 65Hz-40kHz
• Sensitivity: 88dB SPL (1W @ 1m)
• Woofer Mounting Depth: 6,3cm
• Mid-Range Mounting Depth: 3,6cm
• Woofer Cutout Diameter: 13,5cm
• Mid-Range Cutout Diameter: 7,3cm

1x Alpine Status HDA-M80 Hi-Res Mono Subwoofer Amplifier, 500W x 1 at 4-Ohm, 800W x 1 at 2-Ohm - (HDA-M80)

Alpine Status delivers a superior level of audio performance that will take your music to a whole new level.
FEATURES -
• Hi-Res Audio Playback (192kHz/24Bit)
• Mono-Channel Amplifier
• High-Efficiency Digital Circuit Design
• Alpine’s Dual Negative Feedback Control Circuit
• High Bandwidth Amplifier
• Alpine’s Premium Class D Circuit Design
• Copper-plated chassis
• Black circuit board
• One-sided terminal layout
• Top panel sound controls
• Quick connect power and speaker terminals
• Optional Remote bass knob compatible (requires RUX-KNOB.2 or RUX-H01, sold separately)

What's in the Box:
• HDA-M80 Mono Amplifier
• Owner’s manual
• “Birth sheet” that certifies by measurement the actual power of the amplifier in the box
• 4 Screws for amplifier mounting to vehicle
• 2pcs. Mount bracket w/ 4 Screws for attachment to amplifier
• 3pcs. Allen wrench for amplifier connection & installation – Sizes: 2mm/2.5mm/4mm
• 1pc. Quick connector block for Power/Ground/Remote wires
• 1pc. Quick connector block for Speaker wires

TECH SPECS -
• Dimensions: 11.4375” x 7.5” x 2.125”
• Power Rating: (14.4V, ≤1.0% THD+N)
• 800W x 1 @ 2Ω
• 500W x 1 @ 4Ω
• THD+N: 0.02% (10W into 4ohm)
• S/N Ratio: 83dB (1W into 4ohm)
• Frequency response: 8-400Hz (-3dB)
• Damping factor: 1500
• Selectable input level – HI/LO
• Variable High pass / Low pass crossover
• Variable Subsonic filter
• Bass EQ (0 to +12dB, Variable)
• Auto-turn on with remote sensing