Description
Included in this kit
This bundle includes a Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface, a Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables, a Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire, and a Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier.
1x Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface - (NTV-KIT1021)
NAV-TV’s ZEN-H processor seamlessly allows aftermarket amplifiers to be added to the factory Harley-Davidson headunit via its low level (8 channel) analog RCAs @5V RMS. This plug & play kit integrates with various OEM data networks to retain chimes, volume control, fader/balance, and EQ Presets (for true OEM integration).
Tech Specs:
- 24 Bit 48khz Output
- 8 x 5v RMS RCA outputs
- 113db SNR
- Burr Brown DAC
- 7 - 20v input voltage range
- <250mA idle current draw
Model
2024-2025 Harley Davidson/CVO
2024-2025 Harley Davidson/Road Glide
2024-2025 Harley Davidson/Street Glide
ZEN-H Technical Specifications
Hardware & Software
Current HW version: --1r1--
Current SW version: ZEN-H-1.2.8.ntv
Compatible SW (update) OS: Windows, macOS
INPUT
Digital Input A2B
OUTPUT
Digital Outputs: None
Digital Outputs supported: 24bit/48kHz
Frequency Response (digital): 18Hz – 24kHz
Analog Outputs: 8 channels (RCA)
Output Voltage Peak: 13.8v
Output Voltage RMS: 5v
Analog Output Type: Single-Ended
S/N Ratio (analog): 113dB
Frequency Response (analog): 18Hz – 24kHz
THD+N @ -1dBFS -94dB
DAC 192kHz 24bit
DSP 32bit Fixed Point
Power Supply
Current Consumption Stand-by <1 mA
Current Consumption Operational 250 mA MAX
Operational Voltage 7V – 20V DC
Amp Turn-On Output Automatic
Amp Turn-On Voltage V-batt
Amp Turn-On Current Limitation 500mA
Other
Dimensions: 4”x4”x1 1/2”
Weight: 5 oz'
1x Memphis Audio ETP-3 3-Foot 2 -Channel Audio Interconnect Cables - (ETP-3)
ETP RCA connections provide a sound connection for all of your audio equipment. These connectors feature molded color matched ends, flexible PVC jacket and twisted pair wires for noise rejection. Your system performance relies heavily on the connections you use. Don’t sacrifice your vehicles audio quality, use only the best connection available from Memphis Audio.
Molded color matched ends
Clear flexible PVC jacket
Twisted pair design for excellent noise rejection
End 1: 2 Male RCA
End 2: 2 Male RCA
CHANNELS: 2
LENGTH: 3ft
1x Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire - (HDFLXPro4K)
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDBDAFO Front output harness – Ferrules
HDBDARO Rear output harness w/ 8 FT extension – Ferrules
HDPG4K 4-Gauge Power/Ground Kit
1x Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier - (FLX1400.4)
4 CHANNEL POWER AMPLIFIER
Requires 4 AWG Power Wire – HDPG4K
4 X 200 WRMS into 4 ohms @ 12.5 Vdc
4 X 225 WRMS into 4 ohms @ 14.4 Vdc
4 X 300 WRMS into 2 ohms @ 12.5 Vdc
4 X 350 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
2 X 600 WRMS into 4 ohms @ 12.5 Vdc
2 X 700 WRMS into 4 ohms @ 14.4 Vdc Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8 V – 16 V
Current Draw (Music): 50 A
Current Draw (Max): 220 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91 dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 7.6 x 4.9 x 2.0 in / 193 x 124 x 51 mm