Cicada Audio FLX-CXK 2 Component Speaker System for 24+ HD Road Glide with A2B Module

Included in this kit

---

This bundle includes a Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier, a Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit, a Cicada Audio HDFiM - HD RADIO TO FRONT FAIRING AMPLIFIER INPUT w/ LOAD RESISTORS, a Cicada Audio HDFLXFo Front Speaker to FLX Amplifier Output Harness for 2014+ Harley-Davidson FLX Systems Plug‑and‑Play Front Pod Adapter, a Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface, a Cicada Audio 24CXK65.2RG 2024-up Road Glide Component 6.5-inch Kit w/RR075T 2 Ohm, and a Cicada Audio 24CHDRGGT-075 2024+ Road Glide Cicada Audio® Branded Grilles w/ RR075T mounts.

1x Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier - (FLX1000.4)

4 CHANNEL POWER AMPLIFIER
4 X 150 WRMS into 4 ohms @ 12.5 Vdc
4 X 168 WRMS into 4 ohms @ 14.4 Vdc
4 X 220 WRMS into 2 ohms @ 12.5 Vdc
4 X 254 WRMS into 2 ohms @ 14.4 Vdc

BRIDGED MONO – 2 CHANNEL
2 X 461 WRMS into 4 ohms @ 12.5 Vdc
2 X 530 WRMS into 4 ohms @ 14.4 Vdc
Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8V – 16V
Current Draw (Music): 60 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 6.0 x 4.9 x 2.0 in / 152 x 124 x 51 mm

1x Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit - (HDPG4K)

4 AWG H-D® Amplifier Power Kit

6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side

Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness

Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses

1x Cicada Audio HDFiM - HD RADIO TO FRONT FAIRING AMPLIFIER INPUT w/ LOAD RESISTORS - (HDFiM)

HDFiM HD radio to front fairing amplifier input w/ load resistors

1x Cicada Audio HDFLXFo Front Speaker to FLX Amplifier Output Harness for 2014+ Harley-Davidson FLX Systems Plug‑and‑Play Front Pod Adapter - (HDFLXFo)

H-D® SPEAKER TO CICADA AUDIO® FLX AMPLIFIER OUTPUT – FRONT

1x Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface - (NTV-KIT1021)

NAV-TV’s ZEN-H processor seamlessly allows aftermarket amplifiers to be added to the factory Harley-Davidson headunit via its low level (8 channel) analog RCAs @5V RMS. This plug & play kit integrates with various OEM data networks to retain chimes, volume control, fader/balance, and EQ Presets (for true OEM integration).

Tech Specs:
- 24 Bit 48khz Output
- 8 x 5v RMS RCA outputs
- 113db SNR
- Burr Brown DAC
- 7 - 20v input voltage range
- <250mA idle current draw

Model
2024-2025 Harley Davidson/CVO
2024-2025 Harley Davidson/Road Glide
2024-2025 Harley Davidson/Street Glide

ZEN-H Technical Specifications
Hardware & Software
Current HW version: --1r1--
Current SW version: ZEN-H-1.2.8.ntv
Compatible SW (update) OS: Windows, macOS

INPUT
Digital Input A2B

OUTPUT
Digital Outputs: None
Digital Outputs supported: 24bit/48kHz
Frequency Response (digital): 18Hz – 24kHz
Analog Outputs: 8 channels (RCA)
Output Voltage Peak: 13.8v
Output Voltage RMS: 5v
Analog Output Type: Single-Ended
S/N Ratio (analog): 113dB
Frequency Response (analog): 18Hz – 24kHz
THD+N @ -1dBFS -94dB
DAC 192kHz 24bit
DSP 32bit Fixed Point

Power Supply
Current Consumption Stand-by <1 mA
Current Consumption Operational 250 mA MAX
Operational Voltage 7V – 20V DC
Amp Turn-On Output Automatic
Amp Turn-On Voltage V-batt
Amp Turn-On Current Limitation 500mA

Other
Dimensions: 4”x4”x1 1/2”
Weight: 5 oz'

1x Cicada Audio 24CXK65.2RG 2024-up Road Glide Component 6.5-inch Kit w/RR075T 2 Ohm - (24CXK65.4RG)

This bundle includes a Cicada Audio CM65.4X - 6.5-inch Mid-Bass Speakers - 4 Ohm, Pair, a Cicada Audio RR075T - 0.75-inch Titanium Shallow Horn, Pair, and a Cicada Audio 24CHDRGGT-075 2024+ Road Glide Cicada Audio® Branded Grilles w/ RR075T mounts.

1x Cicada Audio CM65.4X - 6.5-inch Mid-Bass Speakers - 4 Ohm, Pair - (CM65.4X)

250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 4Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm

1x Cicada Audio RR075T - 0.75-inch Titanium Shallow Horn, Pair - (RR075T)

RR075T – 1” SHALLOW RING RADIATOR HORN TWEETER
50WRMS/100W MAX Power Handling- per tweeter
Neodymium High Energy/ Light Weight N35 Magnet structure
Heavy Duty/ Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 100dB 1W/1M Average (1W/1M – 2.83V)
12dB -7kHz Crossover with custom tooled/ Vented crossover case
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm
SOLD ONLY IN PAIRS

1x Cicada Audio 24CHDRGGT-075 2024+ Road Glide Cicada Audio® Branded Grilles w/ RR075T mounts - (24CHDRGGT-075)

Description: Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Road Glide models. Each grille includes a custom mount for Cicada Audio® RR075T Shallow Horn Tweeters, ensuring a precise fit and clean installation. Built for durability and performance, these grilles offer a sleek, factory-style appearance while optimizing audio performance—all proudly featuring the Cicada Audio® brand.

1x Cicada Audio 24CHDRGGT-075 2024+ Road Glide Cicada Audio® Branded Grilles w/ RR075T mounts - (24CHDRGGT-075)

Description: Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Road Glide models. Each grille includes a custom mount for Cicada Audio® RR075T Shallow Horn Tweeters, ensuring a precise fit and clean installation. Built for durability and performance, these grilles offer a sleek, factory-style appearance while optimizing audio performance—all proudly featuring the Cicada Audio® brand.