Cicada Audio FLX-CXK 2 Component Speaker System for 14-23 HD Street Glide

Included in this kit

---

This bundle includes a Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier, a Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit, a Cicada Audio HDFiM - HD RADIO TO FRONT FAIRING AMPLIFIER INPUT w/ LOAD RESISTORS, a Cicada Audio HDFLXFo Front Speaker to FLX Amplifier Output Harness for 2014+ Harley-Davidson FLX Systems Plug‑and‑Play Front Pod Adapter, a Cicada Audio 14CXK65.4 - Component 6.5-inch Kit - HD 2014-2023 CM65.4X + CHDRGGTK + CHDSGGT - 4 Ohm, a Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR, and a Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ®.

1x Cicada Audio FLX1000.4 - 4 Channel x 225 Watts @ 2 Ohm Amplifier - (FLX1000.4)

4 CHANNEL POWER AMPLIFIER
4 X 150 WRMS into 4 ohms @ 12.5 Vdc
4 X 168 WRMS into 4 ohms @ 14.4 Vdc
4 X 220 WRMS into 2 ohms @ 12.5 Vdc
4 X 254 WRMS into 2 ohms @ 14.4 Vdc

BRIDGED MONO – 2 CHANNEL
2 X 461 WRMS into 4 ohms @ 12.5 Vdc
2 X 530 WRMS into 4 ohms @ 14.4 Vdc
Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8V – 16V
Current Draw (Music): 60 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 6.0 x 4.9 x 2.0 in / 152 x 124 x 51 mm

1x Cicada Audio HDPG4K - 4 Gauge Power/Ground Kit - (HDPG4K)

4 AWG H-D® Amplifier Power Kit

6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side

Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness

Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses

1x Cicada Audio HDFiM - HD RADIO TO FRONT FAIRING AMPLIFIER INPUT w/ LOAD RESISTORS - (HDFiM)

HDFiM HD radio to front fairing amplifier input w/ load resistors

1x Cicada Audio HDFLXFo Front Speaker to FLX Amplifier Output Harness for 2014+ Harley-Davidson FLX Systems Plug‑and‑Play Front Pod Adapter - (HDFLXFo)

H-D® SPEAKER TO CICADA AUDIO® FLX AMPLIFIER OUTPUT – FRONT

1x Cicada Audio 14CXK65.4 - Component 6.5-inch Kit - HD 2014-2023 CM65.4X + CHDRGGTK + CHDSGGT - 4 Ohm - (14CXK65.4)

Kit includes: Cicada Audio CM65.4X - 6.5-inch Mid-Bass Speaker - 4 Ohm, Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill+RR075T - Pair, and Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR.

Cicada Audio CM65.4X - 6.5-inch Mid-Bass Speaker - 4 Ohm
250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 4Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm

Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill+RR075T - Pair
50 WRMS / 100W MAX Power Handling- per tweeter
Neodymium High Energy / Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Custom Punched Road Glide Grills
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm

Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR
Speaker grilles for H-D Street Glide Motorcycles with tweeter cutout

1x Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR - (CHDSGGT)

H-D 2014-2023 SG Round Grill with cutout - PR

1x Cicada Audio 14HDAR-SG - CX/DSP/FLX Amplifier Mounting System H-D® Street Glide ® - (14HDAR-SG)

Amplifier Mounting Rack for 2014-2023 H-D® Street Glide®

HASSLE-FREE INSTALLATION
Velcro® mount amp to stainless steel tray between the head unit and the headlight.

Powder coated
Stainless steel construction
Mounting hardware included
Designed for CX/FLX/DSP600.4D style amplifiers only