Cicada Audio FLX-CMX 4 Speaker System for 24+ Street Glide

Included in this kit

---

This bundle includes a Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier, a Cicada Audio 14CXK65.2 - Component 6.5-inch Kit - HD 2014-2023 CM65.2X + CHDRGGTK + CHDSGGT - 2 Ohm, a Cicada Audio CXK69.2 - Component 6x9-inch Kit with CM69.2X, RR075T, CHD69TB, CHD69MHD, HDRoM - 2 Ohm, a Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire, a Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit, a Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles, and a Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface.

1x Cicada Audio FLX1400.4 - 4 x 350 @ 2 Ohm Amplifier - (FLX1400.4)

4 CHANNEL POWER AMPLIFIER
Requires 4 AWG Power Wire – HDPG4K

4 X 200 WRMS into 4 ohms @ 12.5 Vdc
4 X 225 WRMS into 4 ohms @ 14.4 Vdc
4 X 300 WRMS into 2 ohms @ 12.5 Vdc
4 X 350 WRMS into 2 ohms @ 14.4 Vdc

BRIDGED MONO – 2 CHANNEL
2 X 600 WRMS into 4 ohms @ 12.5 Vdc
2 X 700 WRMS into 4 ohms @ 14.4 Vdc Frequency response – 20-20,000 +/- 3dB THD < 0.5%
Operating Voltage: 8 V – 16 V
Current Draw (Music): 50 A
Current Draw (Max): 220 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91 dB
Crossover LPF/FULL/HPF: 30 TO 300Hz
Slope:12dB per octave
Gain: 0.2V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 7.6 x 4.9 x 2.0 in / 193 x 124 x 51 mm

1x Cicada Audio 14CXK65.2 - Component 6.5-inch Kit - HD 2014-2023 CM65.2X + CHDRGGTK + CHDSGGT - 2 Ohm - (14CXK65.2)

Kit includes: Cicada Audio CM65.2X - 6.5-inch Mid-Bass Speaker- 2 Ohm, Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill+RR075T - Pair, and Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR.

Cicada Audio CM65.2X - 6.5-inch Mid-Bass Speaker- 2 Ohm
250WRMS/500 MAX Power Handling
Neodymium high energy/ light weight N35 magnet structure
Heavy duty/ die-cast Aluminum basket
2.0-inch 2Ω – High Temp (Black Coat™) Voice Coil
Shortening Ring for the ultimate in speaker control
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 75Hz -20Khz+/-5dB
High Sensitivity: 4dB / 93.2dB (1W/1M)
Total Diameter: 6.5-inch / 165mm
Mounting Depth: 3.0-inch / 76.2mm
Mounting Diameter: 5.7-inch / 145.5mm

Cicada Audio CHDRGGTK - H-D 2014-2023 RG Kidney Grill+RR075T - Pair
50 WRMS / 100W MAX Power Handling- per tweeter
Neodymium High Energy / Light Weight N35 Magnet structure
Heavy Duty / Die-cast Aluminum Basket
4 Ohm for increased durability
1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
Frequency Response: 2KHz -20Khz+/-5dB
High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V)
12dB Crossover with custom tooled/ Vented crossover case
Custom Punched Road Glide Grills
Mounting Depth: 1.13” / 28.9mm
Mounting Diameter: 2” / 50mm

Cicada Audio CHDSGGT - H-D 2014-2023 SG Round Grill with cutout - PR
Speaker grilles for H-D Street Glide Motorcycles with tweeter cutout

1x Cicada Audio CXK69.2 - Component 6x9-inch Kit with CM69.2X, RR075T, CHD69TB, CHD69MHD, HDRoM - 2 Ohm - (CXK69.2)

FEATURES:
Rain or Shine™ all weather performance design
Available in 4- or 2-Ω versions
Carbon Matrix Composite™ (CMC™) cone
Lightweight / rigid / high temp
Maximized efficiency / super strong
Black coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance
OFC copper shorting ring for extended high frequency performance
N35SH Neodymium magnet
Die cast Aluminum custom tooled basket with Vortex Flow Venting™
Warranty: 2 years

SPECIFICATIONS:
2Ω – 6X9-inch mid-bass driver
Power handling: 250W RMS/500W MAX
Voice Coils: 2.0-inch/51mm mid-bass
Cone: Carbon Matrix Composite™
Magnet: Neodymium
Sensitivity: 94dB, 1W / 1M
response 70Hz – 20kHz +/- 3dB
Mounting Depth: 3.7-inch/94mm
Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm

1x Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire - (HDFLXPro4K)

HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDBDAFO Front output harness – Ferrules
HDBDARO Rear output harness w/ 8 FT extension – Ferrules
HDPG4K 4-Gauge Power/Ground Kit

1x Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit - (24CHDLID)

Designed for 2023.5+ Harley-Davidson® updated saddlebag design
Unique Top Load Speaker Baffle Design
3 Part Assembly:
- Speaker Grill
- Speaker Baffle
- Secure Clamping ring with waterproof gasket
Compatible with:
- CICADA 6×9 speakers, even with full size cast frames and oversized surrounds
- CICADA Hard Divider, Tweeter Bridge Accessories
- CICADA 24RING10, 24PORT3 and all CICADA 8” or 10” Midbass drivers.
Baffle Angle that perfectly positions the speaker towards the rider for optimal projection
Increased durability for heavier full size, full depth 6×9 speakers
Better Waterproofing with the fully gasketed baffle clamp
High-strength ASA plastic for durability and performance
UV Resistant materials for long lasting appearance
Engineered for perfect fit and easy installation
Grille Mesh formed with heavy duty powder-coated steel
Edgeless trim design and rugged speaker protection
Compatible with saddlebags featuring electric locks

Included Accessories:
ABS molded Cutout Templates
Heavy duty updated Lid Gasket Seals
Rainproof Lid Covers
CICADA Tethers with Crossover pouch
Die cut speaker gasketing

1x Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles - (24CHDSGG)

2024+ Street Glide Cicada Audio® Branded Grilles
Description:
Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Street Glide models. Engineered for durability and style, they feature the Cicada Audio® branding and deliver a sleek, seamless look that complements your bike’s design.

1x Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface - (NTV-KIT1021)

NAV-TV’s ZEN-H processor seamlessly allows aftermarket amplifiers to be added to the factory Harley-Davidson headunit via its low level (8 channel) analog RCAs @5V RMS. This plug & play kit integrates with various OEM data networks to retain chimes, volume control, fader/balance, and EQ Presets (for true OEM integration).

Tech Specs:
- 24 Bit 48khz Output
- 8 x 5v RMS RCA outputs
- 113db SNR
- Burr Brown DAC
- 7 - 20v input voltage range
- <250mA idle current draw

Model
2024-2025 Harley Davidson/CVO
2024-2025 Harley Davidson/Road Glide
2024-2025 Harley Davidson/Street Glide

ZEN-H Technical Specifications
Hardware & Software
Current HW version: --1r1--
Current SW version: ZEN-H-1.2.8.ntv
Compatible SW (update) OS: Windows, macOS

INPUT
Digital Input A2B

OUTPUT
Digital Outputs: None
Digital Outputs supported: 24bit/48kHz
Frequency Response (digital): 18Hz – 24kHz
Analog Outputs: 8 channels (RCA)
Output Voltage Peak: 13.8v
Output Voltage RMS: 5v
Analog Output Type: Single-Ended
S/N Ratio (analog): 113dB
Frequency Response (analog): 18Hz – 24kHz
THD+N @ -1dBFS -94dB
DAC 192kHz 24bit
DSP 32bit Fixed Point

Power Supply
Current Consumption Stand-by <1 mA
Current Consumption Operational 250 mA MAX
Operational Voltage 7V – 20V DC
Amp Turn-On Output Automatic
Amp Turn-On Voltage V-batt
Amp Turn-On Current Limitation 500mA

Other
Dimensions: 4”x4”x1 1/2”
Weight: 5 oz'