Description
Included in this kit
This bundle includes a Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface, a Cicada Audio FLX700.4 - 4 Channel x 175 Watts @ 2 Ohm Amplifier, a Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire, a Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair, a Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair, a Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit, and a Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles.
1x Nav-TV NTV-KIT1021 ZEN-H | Harley-Davidson A2B Audio Interface - (NTV-KIT1021)
NAV-TV’s ZEN-H processor seamlessly allows aftermarket amplifiers to be added to the factory Harley-Davidson headunit via its low level (8 channel) analog RCAs @5V RMS. This plug & play kit integrates with various OEM data networks to retain chimes, volume control, fader/balance, and EQ Presets (for true OEM integration).
Tech Specs:
- 24 Bit 48khz Output
- 8 x 5v RMS RCA outputs
- 113db SNR
- Burr Brown DAC
- 7 - 20v input voltage range
- <250mA idle current draw
Model
2024-2025 Harley Davidson/CVO
2024-2025 Harley Davidson/Road Glide
2024-2025 Harley Davidson/Street Glide
ZEN-H Technical Specifications
Hardware & Software
Current HW version: --1r1--
Current SW version: ZEN-H-1.2.8.ntv
Compatible SW (update) OS: Windows, macOS
INPUT
Digital Input A2B
OUTPUT
Digital Outputs: None
Digital Outputs supported: 24bit/48kHz
Frequency Response (digital): 18Hz – 24kHz
Analog Outputs: 8 channels (RCA)
Output Voltage Peak: 13.8v
Output Voltage RMS: 5v
Analog Output Type: Single-Ended
S/N Ratio (analog): 113dB
Frequency Response (analog): 18Hz – 24kHz
THD+N @ -1dBFS -94dB
DAC 192kHz 24bit
DSP 32bit Fixed Point
Power Supply
Current Consumption Stand-by <1 mA
Current Consumption Operational 250 mA MAX
Operational Voltage 7V – 20V DC
Amp Turn-On Output Automatic
Amp Turn-On Voltage V-batt
Amp Turn-On Current Limitation 500mA
Other
Dimensions: 4”x4”x1 1/2”
Weight: 5 oz'
1x Cicada Audio FLX700.4 - 4 Channel x 175 Watts @ 2 Ohm Amplifier - (FLX700.4)
4 CHANNEL POWER AMPLIFIER
4 X 110 WRMS into 4 ohms @ 12.5 Vdc
4 X 128 WRMS into 4 ohms @ 14.4 Vdc
4 X 140 WRMS into 2 ohms @ 12.5 Vdc
4 X 175 WRMS into 2 ohms @ 14.4 Vdc
BRIDGED MONO – 2 CHANNEL
2 X 261 WRMS into 4 ohms @ 12.5 Vdc
2 X 302 WRMS into 4 ohms @ 14.4 Vdc
Frequency response – 20-20,000 +/- 3 dB THD < 0.5%
Operating Voltage: 8 V – 16 V
Current Draw (Music): 60 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 120 A
Total Efficiency: 79%
Damping Factor: 200
SNR: 91dB
Crossover LPF/FULL/HPF: 30 TO 300 Hz
Slope:12 dB per octave
Gain: 0.2 V – 12 Vac
Turn-On Configuration: REM/DC
THD + N (10% Rated Power): 0.1%
Product Dimensions (Inches / Millimeters): 4.5 x 4.9 x 2.0 in / 114 x 124 x 51 mm
1x Cicada Audio HDFLXPro4K - 4-Channel FLX Wiring Harness Kit with 4 AWG PWR Wire - (HDFLXPro4K)
HDFIM Front input harness with 47-ohm resistors – Molex
HDRIM Rear input harness with 47-ohm resistors – Molex
HDBDAFO Front output harness – Ferrules
HDBDARO Rear output harness w/ 8 FT extension – Ferrules
HDPG4K 4-Gauge Power/Ground Kit
1x Cicada Audio CX69.2 - Coaxial Speakers 6x9-inch - 2 Ohm, Pair - (CX69.2)
• 125WRMS/250 MAX Power Handling
• Neodymium High Energy/ Light Weight N35H Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 53.6Hz -20Khz+/-5dB
• High Sensitivity: 95.5dB (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component: High Efficiency CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct
Size in. / mm: 6 X 9 (163 X 234)
Power Handling W peak 250W - Hi-pass filtered** @ 100Hz - 12 dB Oct.
Impedance 2 Ohm
Frequency Response Hz: 45Hz-20k +/- 5dB
Sensitivity dB/SPL 95.5dB: (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35) Mid / 1.0 (25) Tweeter
Magnet: Neodymium N35H
Dome: PEI
Weight of 1 Speaker (kg) lb.: (1.04) 2.3
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm: 6 X 9 (163 X 234)
Re Ω: 2
Fs Hz: 53.6
Le mH: @ 1 kHz 0,03
Vas I: 25.89
Mms g: 22
Cms mm/N: 0.431
BL T• m: 6.371
Qts: 0.548
Qes: 0.609
Qms: 5.488
Spl dB: 95.5dB (1W/1M -2.83V)
1x Cicada Audio CX65.2 - Coaxial Speakers 6.5-inch - 2 Ohm, Pair - (CX65.2)
• 100W RMS/200 MAX Power Handling
• Neodymium High Energy/ Light Weight N35 Magnet structure
• WaterProof IMPP Cone with NBR surrounds
• Heavy Duty/ Injected High Temp Polymer Frame.
• 1.4” 2 Ohm – High Temp Voice Coil (Black Coat™) Voice Coil MidBass
• 1.0” PEI dome tweeter with Neodymium magnet
• DPSH® “Dual-Phase Slot Horn”
• Advanced Voice Coil Heat Sink Design for Better Heat Dissipation
• Frequency Response: 54Hz -20Khz+/-5dB
• High Sensitivity: 94dB 1W/1M Average (1W/1M - 2.83V)
• Built in 6dB Crossover
TECHNICAL SPECIFICATIONS
Component High Efficiency: CoAx Driver
Provided inline crossover Hi-pass filter @ 6 kHz - 6 dB Oct.
Size in. / mm: 6.5 (165)
Power Handling (EACH) W peak 200W - Hi-pass filtered @ 100Hz - 12 dB Oct
Impedance: 2 Ohm
Frequency Response Hz 65Hz-20k +/- 5dB
Sensitivity dB/SPL 94dB Average (1W/1M -2.83V)
Voice Coil Ø in. (mm): 1.4 (35.5)Mid / 1.0 (25) Tweeter
Magnet Neodymium N35H
Dome Aluminium
Weight of 1 Speaker lb. (kg): 2.1 (0.95)
ELECTRO-ACOUSTIC PARAMETERS - MIDBASS
D inches / mm 6.5 / 165
Re 2 Ohms
Fs Hz 70
Le mH @ 1 kHz 0,03
Vas I 8.95
Mms g 12.0
Cms mm/N 0.434
BL T m 6.09
Qts 0.363
Qes 0.387
Qms 6.017
Spl dB 94dB Average (1W/1M -2.83V)
1x Cicada Audio 24CHDLID 2024+ H-D® Saddlebag Lid 6×9-inch Cut-in Mounting Kit - (24CHDLID)
Designed for 2023.5+ Harley-Davidson® updated saddlebag design
Unique Top Load Speaker Baffle Design
3 Part Assembly:
- Speaker Grill
- Speaker Baffle
- Secure Clamping ring with waterproof gasket
Compatible with:
- CICADA 6×9 speakers, even with full size cast frames and oversized surrounds
- CICADA Hard Divider, Tweeter Bridge Accessories
- CICADA 24RING10, 24PORT3 and all CICADA 8” or 10” Midbass drivers.
Baffle Angle that perfectly positions the speaker towards the rider for optimal projection
Increased durability for heavier full size, full depth 6×9 speakers
Better Waterproofing with the fully gasketed baffle clamp
High-strength ASA plastic for durability and performance
UV Resistant materials for long lasting appearance
Engineered for perfect fit and easy installation
Grille Mesh formed with heavy duty powder-coated steel
Edgeless trim design and rugged speaker protection
Compatible with saddlebags featuring electric locks
Included Accessories:
ABS molded Cutout Templates
Heavy duty updated Lid Gasket Seals
Rainproof Lid Covers
CICADA Tethers with Crossover pouch
Die cut speaker gasketing
1x Cicada Audio 24CHDSGG - 2024+ Street Glide Cicada Audio® Branded Grilles - (24CHDSGG)
2024+ Street Glide Cicada Audio® Branded Grilles
Description:
Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Street Glide models. Engineered for durability and style, they feature the Cicada Audio® branding and deliver a sleek, seamless look that complements your bike’s design.