Description
MB Quart FA1-400.4 Formula Series 4 x 50 Watts @ 4 ohms, 4 x 100 Watts @ 2 Ohms , 2 x 200 Watts Bridged @ 4 Ohms
MB Quart Formula series four channel car audio amplifier featuring innovative sound quality and power technology. The FA1-400.4 is a 400 watt bridgeable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit.
Specifications:
• CLASS - Class SQ (Class A/B)
• TOTAL CHANNELS - 4
• POWER @ 2 OHMS - 4 x 100
• POWER @ 4 OHMS - 4 x 50
• CROSSOVER - Electronic
• VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE - CH1 & CH2: Switched, Full / HPF / LPF, 50Hz - 500Hz, CH3 & CH4: Switched, Full / HPF / LPF, 50Hz - 500Hz
• VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE - CH1 & CH2: Switched, Full / HPF / LPF, 50Hz - 250Hz, CH3 & CH4: Switched, Full / HPF / LPF, 50Hz - 250Hz
• BASS BOOST - 0-9dB
• VARIABLE VOLTAGE - .02 - 9V
• SIGNAL TO NOISE - >90
• FREQUENCY RESPONSE - 10Hz-45KHz
• TOTAL HARMONIC DISTORTION (THD) - Less Than 0.5%
• SPEAKER LEVEL AUDIO INPUTS - RCA Jack
• POWER TERMINAL 12V/GND - 4 awg
• SPEAKER TERMINAL WIRE GAUGE - 12 awg
LOW NOISE PREAMPLIFIER CIRCUITRY - Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
ELECTRONIC EQUALIZER - Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
CLASS / TOPOLOGY - Class Q1 Mono (Class D): MB Quart’s Class Q1 offers the efficiency of today’s D-Class with increased engineering to focus on sound quality from the power supply through the output devices, the FLUID-FETS.
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS - Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
MB Quart Formula series four channel car audio amplifier featuring innovative sound quality and power technology. The FA1-400.4 is a 400 watt bridgeable car audio amplifier. Formula amplifiers feature DC Sensing to allow any amplifier to be easy integrated into an OEM system by simply adapting a RCA cable from the source unit.
Specifications:
• CLASS - Class SQ (Class A/B)
• TOTAL CHANNELS - 4
• POWER @ 2 OHMS - 4 x 100
• POWER @ 4 OHMS - 4 x 50
• CROSSOVER - Electronic
• VARIABLE HIGH PASS CROSSOVER 12DB PER OCTAVE - CH1 & CH2: Switched, Full / HPF / LPF, 50Hz - 500Hz, CH3 & CH4: Switched, Full / HPF / LPF, 50Hz - 500Hz
• VARIABLE LOW PASS CROSSOVER 12DB PER OCTAVE - CH1 & CH2: Switched, Full / HPF / LPF, 50Hz - 250Hz, CH3 & CH4: Switched, Full / HPF / LPF, 50Hz - 250Hz
• BASS BOOST - 0-9dB
• VARIABLE VOLTAGE - .02 - 9V
• SIGNAL TO NOISE - >90
• FREQUENCY RESPONSE - 10Hz-45KHz
• TOTAL HARMONIC DISTORTION (THD) - Less Than 0.5%
• SPEAKER LEVEL AUDIO INPUTS - RCA Jack
• POWER TERMINAL 12V/GND - 4 awg
• SPEAKER TERMINAL WIRE GAUGE - 12 awg
LOW NOISE PREAMPLIFIER CIRCUITRY - Q-Stasis Pre Amplifier Stage: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
ELECTRONIC EQUALIZER - Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
CLASS / TOPOLOGY - Class Q1 Mono (Class D): MB Quart’s Class Q1 offers the efficiency of today’s D-Class with increased engineering to focus on sound quality from the power supply through the output devices, the FLUID-FETS.
LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS - Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel