Description
Included in this kit
This bundle includes a Fusion 010-13356-00 Performance RCA Cable Dual Female To 8-way Male Splitter, a Fusion MS-AP41200 150w per channel RMS @4ohm Apollo 4 Channel Marine Amplifier, and a Stinger SEA4243 Marine Complete Amplifier Installation Kit 3-Meters of 4 Gauge Power + Ground.
1x Fusion 010-13356-00 Performance RCA Cable Dual Female To 8-way Male Splitter - (MS-RCAY8M)
The Dual Female to 8-Way Male RCA Splitter Cable connects your compatible Fusion marine stereo to your compatible Fusion marine multichannel amplifier. This cable allows you to drive up to 4 pairs of speakers with the audio signal from a single audio zone – ideal for boats where there could be multiple pairs of speakers in a single audio zone.
1x Fusion MS-AP41200 150w per channel RMS @4ohm Apollo 4 Channel Marine Amplifier - (MS-AP41200)
Amplify the moment with an Apollo™ marine amplifier – designed specifically for use with your Fusion® DSP-enabled marine stereo and Fusion speakers. This powerful and efficient 4 channel amplifier is the difference between hearing the music and feeling it. With an impressive 150-watt RMS per channel (at 4 ohm), this amplifier can power up to four pairs of speakers or two pairs of speakers and one subwoofer. The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Link™ app on a compatible smartphone).
NOTE:Fusion DSP-enabled marine stereo (Apollo RA770, Apollo RA670, Apollo WB670, MS-RA210) required. When paired with an Apollo stereo, unmatched tuning and fidelity can be achieved. This amplifier is not compatible with any other marine stereos.
Features -
• Impressive Power: 150-watt RMS per channel (at 4 ohm), capable of powering up to four pairs of speakers or two pairs of speakers and one subwoofer.
• Efficient Class-D Design: Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery.
• Easy Tune Feature: Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone).
• LED Indicator: Show issues with electrical currents and shorts as well as temperature.
• Less Total Harmonic Distortion: The amplifier is designed with minimal distortion and noise, allowing for better quality audio.
• Ignition Protected: Intelligent electronic fuse prevents damage from over/under current, temperature, output short and other faults.
• Conformal Coated PCBs: The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements.
• Powder Coated Aluminum Finish: Salt fog, temperature, vibration and UV tested with a modern aesthetic design to add style to your boat.
• Easy Installation: Proprietary cable connectors and a mounting bracket is included in the box. The cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allow you to simply clip the amplifier in place for a clean finish.
• High Power Mode: High-power mode adapters are included in the box, designed to simplify the way you bridge two channels in high power mode, increasing the output power.
• True-Marine™ Design: Designed to withstand the harshest marine environments season after season and comes with a 3-year warranty.
Specifications -
• Physical dimensions without bracket (LxWxH): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
• Physical dimensions with bracket (LxWxH): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
• CEA-2006 power rating: 4 Channel: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD
• Total rated power output - 2 ohm (watts): 4 Channel: 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD
• Total rated power output - 4 ohm Bridged (watts): 4 Channel: 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD
• Peak power (watts): 4 Channel: 1200 watts
• Input Impedance: 22k ohm
• Operating Voltage: 10.8 V - 16 V DC
• Current Consumption: (StandBy) < 5 mA @ 14.4 V input
• Current Consumption: (Idle) < 1.15 A @ 14.4 V input
• Current Consumption: (Max) 53 A
• Fuse Rating: 85 A electronic fuse (no replacement necessary)
• Ignition Safety Protected: (SAE J1171) Yes
• Protection Circuits: Reverse voltage, input under/over voltage, over temperature, output short circuit
• Operating Temperature Range: 32° to 122° F (0° to 50° C)
1x Stinger SEA4243 Marine Complete Amplifier Installation Kit 3-Meters of 4 Gauge Power + Ground - (SEA4243)
Power wiring kit utilizing marine-grade jacket. True Copper for current transfer and tinned conductors for reliability in the harsh marine environment Industry first Siamese Pair dual power and ground wire High strand count OFC hyper-twist tinned conductors Highest marine-grade - Type III BC5W2 Compliant Marine PVC jacket, 1050C dry, 750C wet, salt, fog, oil, water-resistance exceeds UL1426 Marine Standards Element-resistant MIDI fuse holder 4GA 3 meter / 9.8 feet / 175 amp MIDI fuse