Description
Included in this kit
This bundle includes a Fusion Apollo MS-RA800 Marine Stereo, a Fusion MS-AP41200 150w per channel RMS @4ohm Apollo 4 Channel Marine Amplifier, and 2x JL Audio 8.8-Inch M6 Marine Coaxial Speaker System, RGB LED, Gunmetal & Titanium, Sport Grille - SKU: M6-880X-S-GmTi-i.
1x Fusion Apollo MS-RA800 Marine Stereo - (MS-RA800)
Itās the most powerful and technologically advanced FusionĀ® marine stereo ever. With audiophile-level components and a built-in amplifier providing twice the power of the predecessor RA770, this system delivers lossless audio performance of unmatched clarity. Plus, its Wi-FiĀ® connectivity supports seamless AirPlayĀ® audio streaming on your boat.
General
Control Surface Dust/Water Rating (when properly installed): IPX6 and IPX7
Rear Dust/Water Rating (when properly installed): IPX3
Operating temperature rang: -20 to 70Ā° C
Current draw (max): 25 A at 14.4 V; 15A at 28.8 V
Networking
NMEA 2000Ā® LEN: 2 (65 mA)
BLUETOOTHĀ® wireless range: up to 30 ft
ANTĀ® wireless range: Up to 10 ft
Wireless frequencies/protocols: WiFi 2.4Ghz: +12dBm nominal MIMO 2 x 2, BLUETOOTHĀ®: 2.4 GHz @ +10 dBm nominal, ANTĀ®: 2.4GHz 0dBm nominal
Stereo Features
Display size: 4.3" (109 mm)
Display type: capacitive touchscreen color LCD
Display resolution: 800 x 480
Optically bonded display: Yes
Built-in amplifier: Class D (4 Ī©)
Built-in Wi-FiĀ®: Yes
Built-in Digital Signal Processing (DSP): yes (with custom DSP profile setup using Fusion-Linkā¢ app)
Stereo networking: yes (wired or wireless)
Fusion-Linkā¢ control: yes (MFD, smart device and Garmin watch)
Multi-Zoneā¢ technology: 4 zones
BLUETOOTHĀ® wireless technology: Yes
ANTĀ® wireless technology: Yes
Multi-language interface: Yes
Software updates: Over-the-air updates via Fusion-Linkā¢ app (when connected to wireless network router)/USB
Connections
Auxiliary inputs (RCA): 2
HDMI ARC Ports: 1
Ethernet ports: 1
NMEA 2000Ā® ports: 1
USB 2.0 ports: 1 (USB-C)
AM/FM ports (Motorola antenna connector): 1
Speaker connections: 4 (2 zone amplified)
RCA pre-out (left, right and subwoofer - requires external amplification): 4 zones
Line out (requires external amplification): 4 (L + R per zone)
Subwoofer out (requires external amplification): 4 (1 mono output per zone)
1x Fusion MS-AP41200 150w per channel RMS @4ohm Apollo 4 Channel Marine Amplifier - (MS-AP41200)
Amplify the moment with an Apolloā¢ marine amplifier ā designed specifically for use with your FusionĀ® DSP-enabled marine stereo and Fusion speakers. This powerful and efficient 4 channel amplifier is the difference between hearing the music and feeling it. With an impressive 150-watt RMS per channel (at 4 ohm), this amplifier can power up to four pairs of speakers or two pairs of speakers and one subwoofer. The Easy Tune feature automatically regulates audio settings for the best sound quality without manual adjustments (Requires setup using the Fusion-Linkā¢ app on a compatible smartphone).
NOTE:Fusion DSP-enabled marine stereo (Apollo RA770, Apollo RA670, Apollo WB670, MS-RA210) required. When paired with an Apollo stereo, unmatched tuning and fidelity can be achieved. This amplifier is not compatible with any other marine stereos.
Features -
ā¢ Impressive Power: 150-watt RMS per channel (at 4 ohm), capable of powering up to four pairs of speakers or two pairs of speakers and one subwoofer.
ā¢ Efficient Class-D Design: Uses less power, so you can listen to music for longer at higher volumes, with less drain on the battery.
ā¢ Easy Tune Feature: Automatically adjusts audio settings for the best possible sound quality with no manual adjustments required (Requires setup using the Fusion-Link app on a compatible smartphone).
ā¢ LED Indicator: Show issues with electrical currents and shorts as well as temperature.
ā¢ Less Total Harmonic Distortion: The amplifier is designed with minimal distortion and noise, allowing for better quality audio.
ā¢ Ignition Protected: Intelligent electronic fuse prevents damage from over/under current, temperature, output short and other faults.
ā¢ Conformal Coated PCBs: The amplifier circuit board has been specially coated to provide enhanced protection from the marine elements.
ā¢ Powder Coated Aluminum Finish: Salt fog, temperature, vibration and UV tested with a modern aesthetic design to add style to your boat.
ā¢ Easy Installation: Proprietary cable connectors and a mounting bracket is included in the box. The cable connectors allow you to pre-wire your speakers/subwoofers, while the mounting bracket allow you to simply clip the amplifier in place for a clean finish.
ā¢ High Power Mode: High-power mode adapters are included in the box, designed to simplify the way you bridge two channels in high power mode, increasing the output power.
ā¢ True-Marineā¢ Design: Designed to withstand the harshest marine environments season after season and comes with a 3-year warranty.
Specifications -
ā¢ Physical dimensions without bracket (LxWxH): 9.25" x 7.06" x 1.75" (235 x 180 x 45 mm)
ā¢ Physical dimensions with bracket (LxWxH): 9.25" x 7.06" x 2.13" (235 x 180 x 50 mm)
ā¢ CEA-2006 power rating: 4 Channel: 150 watt RMS x 4 @ 14.4 V input - 4 ohm < 1% THD
ā¢ Total rated power output - 2 ohm (watts): 4 Channel: 290 watt RMS x 4 @ 14.4 V input - 2 ohm < 1% THD
ā¢ Total rated power output - 4 ohm Bridged (watts): 4 Channel: 580 watt RMS x 2 @ 14.4 V input - 4 ohm Bridged < 1% THD
ā¢ Peak power (watts): 4 Channel: 1200 watts
ā¢ Input Impedance: 22k ohm
ā¢ Operating Voltage: 10.8 V - 16 V DC
ā¢ Current Consumption: (StandBy) < 5 mA @ 14.4 V input
ā¢ Current Consumption: (Idle) < 1.15 A @ 14.4 V input
ā¢ Current Consumption: (Max) 53 A
ā¢ Fuse Rating: 85 A electronic fuse (no replacement necessary)
ā¢ Ignition Safety Protected: (SAE J1171) Yes
ā¢ Protection Circuits: Reverse voltage, input under/over voltage, over temperature, output short circuit
ā¢ Operating Temperature Range: 32Ā° to 122Ā° F (0Ā° to 50Ā° C)
2x JL Audio 8.8-Inch M6 Marine Coaxial Speaker System, RGB LED, Gunmetal & Titanium, Sport Grille - SKU: M6-880X-S-GmTi-i - (M6-880X-S-GmTi-i)
JL Audio M6-880X-S-GmTi-i
JL Audio 8.8-Inch M6 Marine Coaxial Speaker System, RGB LED, Gunmetal & Titanium, Sport Grille - SKU: M6-880X-S-GmTi-i
M6 Loudspeakers fulfill JL Audioās commitment to raise the bar with each product generation. The JL Audio engineering team has completely reinvented the premium marine loudspeaker, with major improvements in performance, precision and durability. Offered in multiple sizes and cosmetic options, most models are also available with a brilliant, new lighting technology.
Coaxial Speaker Technology
Every M6 coaxial loudspeaker starts with a long-excursion woofer designed with JL Audioās proprietary motor, suspension and cone modeling systems to yield superior frequency response, smooth mid-range dispersion and linear performance at all listening levels. JL Audioās acoustics laboratory in Miramar, Florida performs extensive testing on multiple generations of prototypes to refine every design and extract maximum performance.
Matching Silk-Dome Tweeters
Since the different size woofers in the M6 coaxials have different upper frequency response limits, each size pairs with its own specially designed, matching silk dome tweeter (0.8, 1.0, or 1.25-inch diameter). Each of these tweeters is precisely tuned via a rear cavity that optimizes its mid-range extension to seamlessly transition with its matching woofer. The result is smooth, evenly dispersed sound throughout the critical crossover region, making the overall sonic presentation clean and clear.
Advanced Built-In Crossover Networks
Crossover networks are a critical part of the M6 coaxial speakersā acoustic design and are considerably more sophisticated than those used in most marine coaxial speakers. The M6-650X employs a 1st order low-pass and 2nd order high-pass filter, while the M6-770X and M6-880X apply a 2nd order low-pass and 3rd order high-pass filter. Each crossover network also employs an electronic tweeter protection circuitto minimize the possibility of tweeter failure.
The multiple components required inthese crossovers are laid out on a ring-shaped circuit board that is built into each speakerās terminal assembly, ensuring that the crossover is secure and protected from the elements.
Transflectiveā¢ LED Illumination
Included on this M6 model is JL Audioās Transflectiveā¢ LED technology. By emitting light from multiple LEDs through our specially engineered cone material, this patent-pending breakthrough delivers a beautiful cone illumination effect, with no hot spots or reflections on the cone surface.
Choose from seven fixed lighting colors or control the color and intensity of the lighting actively using a lighting controller accessory (sold separately). Separate 12V wiring is required to power the illumination.
General Specifications
| Mounting Application | Infinite Baffle |
| Continuous Power Handling (RMS) | 125 W |
| Recommended Amplifier Power (RMS) | 50 - 250 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ī© |
| System Frequency Response | 38 Hz - 20 KHz Ā± 3 dB |
Coaxial Physical Specifications
| Frame Outer Diameter (A) | 8.80 in / 224 mm |
| Bolt Hole Circle Diameter (B) | 7.97 in / 202 mm |
| Frontal Grille Protrusion | 1.37-Inches for Classic Grille, 1.45 Inches for Sport Grille |
| Mounting Hole Diameter (E) | 7.375 in / 187 mm |
| Mounting Depth (F) | 5 in / 127 mm |