Description
Included in this kit
This bundle includes a Hertz SPL Show Series SV-200-NEO 8 in. (200mm) SPL 4-Ohm Midrange Speakers (Pair) with Neo Magnets and UV/Waterproofing, a Hertz SPL Show Series ST-25A-NEO 1" High Efficiency Compression Tweeters, and a Hertz SPL Show SP 4.900 D-Class 4 Channel Amplifier 250 WRMS x 4 at 2Ω (IP55 rated).
1x Hertz SPL Show Series SV-200-NEO 8 in. (200mm) SPL 4-Ohm Midrange Speakers (Pair) with Neo Magnets and UV/Waterproofing - (SV-200-NEO)
New SV 200 NEO features compact dimensions and light weight preserving excellent performance thanks to the use of Neodymium N38 H for the motor units. To allow a safe outdoor use without discoloration over time, cones has waterproofing and anti-UV treatment and motor units is painted with cataphoresis with insulated lead-wires to avoid oxidation. The terminals and mounting holes are compatible for installation on Harley-Davidson motorbikes!
Features -
• Compact dimensions and light weight preserving excellent performance thanks to the use of Neodymium N38 H for the motor units
• Cones waterproofing and anti-UV treatment to allow safe outdoor use without discoloration over time
• Motor units treated with cataphoresis and insulated lead-wires to avoid oxidation
• Terminals and mounting holes compatible for installation on Harley-Davidson motorbikes
• Specifications -
Size mm (in.): 200 (8)
• Power Handling - Peak W: 500
• Power Handling - Continuous W: 200
• Impedance Ω: 4
• Frequency response Hz: 100 ÷ 8k
• Sensitivity dB SPL: 100
• Voice coil Ø mm (in.): 38,6 (1.5)
1x Hertz SPL Show Series ST-25A-NEO 1" High Efficiency Compression Tweeters - (ST-25A-NEO)
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 25 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 25A Neo provides tweeter only.
Features -
• Powerful Neodymium magnet providing high performance with compact size.
• FEM (Finite Element Method) optimized phase-plug and loading horn.
• CCAR (Copper Clad Aluminium Ribbon) voice coil for unheard-of thermal and mechanical capability ready for an easy replacement with replacement body kit.
• Extra-light aluminium membrane to maximize SPL with high current, screw terminals.
• Body waterproofing and anti-UV treatment to allow safe outdoor use without discoloration over time.
Specifications -
• Size mm (in.): 44 (1.8) • Power Handling - Peak W: 100 Hi-pass filtered @ 5 kHz - 12 dB Oct. • Impedance Ω: 4 • Frequency response Hz: 3k ÷ 20k • Sensitivity dB SPL: 107 • Voice coil Ø mm (in.): 25 (1)
1x Hertz SPL Show SP 4.900 D-Class 4 Channel Amplifier 250 WRMS x 4 at 2Ω (IP55 rated) - (SP-4.900)
Features -
• Up to 85% efficiency thanks to ADC (Advanced D-Class) output stage
• USS (Universal Speakers Simulators) allows SP 4.900 to work with head units
featuring the “speaker load detection” circuit
• 160 x 4 (4Ω) with ultra-compact size (211,6 x 130 mm)
• IP55 aluminum chassis for maximum protection against humidity and external agents
• No cooling fan to prevent internal accumulation of dirt
• Sealed power cord, line inputs, and speaker outputs to prevent oxidation
• Crossovers filters and controls on a single side to facilitate calibration when the product is installed
General Specifications -
• Channels: 4 - 3 - 2
• Nominal power supply voltage: 11 ÷ 15 VDC
• Pulse Operating voltage: 6 ÷ 16 VDC
• Idling current: 1.1 A
• Idling current when off: 0.03 mA
• Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power): 50 A
• Remote IN: 6 ÷ 15 VDC (9 mA)
• DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers: 3.5 ÷ 7 VDC
• Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power: 0.02%
• Damping factor @ 1 kHz, 4Ω, 2 VRMS: 200
• Bandwidth @ -3 dB: 10 Hz ÷35 kHz
• S/N ratio (A weighted @ 1 V Input): 105 dBA
• Pre-In sensitivity: 0.6 ÷ 6 VRMS
• Speaker-In sensitivity: 2.2 ÷ 22 VRMS
Output Power -
• Output Nominal Power (RMS) @ 14.4 VDC, THD 1%:
• 4 Ch: 160 W x 4 (4Ω)
• 4 Ch: 250 W x 4 (2Ω)
• 3 Ch: 160 W x 2 (4Ω) + 500 W x 1 (4Ω)
• 3 Ch: 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
• 2 Ch: 500 W x 2 (4Ω)