%2bht-2__bc__09183.1664297879.jpg?c=2 "Wet Sounds Marine Speaker Package: HT-2 300 Watts x 2 Amplifier, Two pairs of XS-65i-S 6.5\" 60 Watt RMS Speakers")
%2bht-2__bc__09183.1664297879.jpg?c=2 "Wet Sounds Marine Speaker Package: HT-2 300 Watts x 2 Amplifier, Two pairs of XS-65i-S 6.5\" 60 Watt RMS Speakers")
Description
Included in this kit
Wet Sounds Speaker Package
Wet Sounds HT-2 2-Channel Amplifier With Two Pairs of Wet Sounds XS-65i-S Silver 60 Watt RMS Speakers.
Give Your UTV or Boat the boost it needs to be the life of the lake, or trail. This package, hand-picked by us at Creative Audio, gives you the most value and performance for your dollar. This includes a pair of 6.5" 60 Watt RMS Wet Sounds speakers that are bar-none to others in this price when it comes to pure output, as well as the Wet Sounds HT-2 amplifier which is capable of putting out a staggering 300 Watts RMS x 2 at 2 ohms. We know Boats and UTV are loud, so you need a stereo to match, and you cannot go wrong with this package.
Wet Sounds XS-65i-S 6.5" Coaxial Marine Speakers
Speaker Specifications
| Impedance | 4 Ohms Per Speaker |
| Peak Wattage | 200 Watts |
| RMS Wattage | 60 RMS per Speaker |
| Mid Bass | 6.5 Inch Composite Woofer With Rubber Surround |
| High Frequency | Coaxially Mounted Titanium Dome Tweeter |
| Frequency Response | 40Hz to 22KHz |
Physical Specifications
| Overall Diameter | 6.8" / 172mm |
| Mounting Hole Requirements | 4.92" / 125mm |
| Mounting Depth | 2.6" / 66mm |
Wet Sounds Ht-2 Amplifier
Rated Continuous (RMS) Power @ 14.4 V
| 4 Ohm Stereo | 165 X 2 |
| 2 Ohm Stereo | 300 W RMS X 2 |
| 4 Ohm Mono | 575 W RMS X 1 |
| 2 Ohm Mono | This Amp Will Go Into Protect At 2 Ohm Mono |
Features
| Removable Wire Plugs | Aids in installation and improves waterproofing |
| Thermal Protection | Prevents Damage To Amplifier By Cutting Power in Excessive Operating Temperatures |
| Frequency Response | 10 Hz - 20 kHz (+0, -1dB) |
| Max Current Rating | 50 Amps |
| Idle Current Rating | 1.4 Amps |
| Signal To Noise Ratio | >95dBa |
| Crossover Type | Switchable - Hi/Lo/Full |
| Operating Voltage | 10 Volts - 16 Volts |
| Turn On Delay | 4 Seconds |
| Input Voltage | Variable 200mV to 5V |
Physical Specifications
| Height (H) | 2.5" |
| Width (W) | 11.8" With End Caps, 8.9" Without |
| Depth (D) | 7.2" |
| Net Weight | 6lb |
