Description
Included in this kit
This bundle includes a JBL CLUB-A6001A High performance mono subwoofer car amplifier, and a JBL CLUB1000P Club Series - Single 10" Slip Stream ported Enclosure 2ohm.
1x JBL CLUB-A6001A High performance mono subwoofer car amplifier - (Club-A6001A)
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
What’s in the box:
One Club A600 mono subwoofer car amplifier
Four 30A ATO fuses (2 installed, 2 spare)
2 Bare wire-to-RCA adapters
Remote bass control module
16.5' Remote control cable (RJ-25 plugs on both ends)
2 Self-tapping screws for remote (M3 x 15mm)
4 Mounting screws (M4 x 53mm)
Owner’s Manual
Two JBL stickers
1 logo badage
Technical specifications:
Mono subwoofer car amplifier
350 watts RMS x 1 at 4 ohms
(600 watts RMS x 1 at 2 ohms)
Class D amp technology
Variable low-pass filter (32–320 Hz, 12 dB/octave)
Variable bass boost (0-12dB at 45Hz)
Phase switch (0, 180 degrees)
Preamp and speaker-level inputs
Fuse rating: 30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
W x H x D = 220mm x 51.3mm x 180mm
W x H x D = 8-11/16" x 2-1/16" x 7-1/8"
1x JBL CLUB1000P Club Series - Single 10" Slip Stream ported Enclosure 2ohm - (CLUB1000P)
New JBL Club brings you their bass enclosures, the perfect marriage of subwoofer performance and box design. These enclosures are engineered with JBL’s patented Slipstream port uses a double-flared design to cut port noise and distortion by reducing turbulence. Less turbulence, more boom. The box is designed with wedge box type with rounded corner which allows flexible placement direction for best performance and maximize the space in vehicles. A removable logo badge is included allow you to put anywhere you like.
Slipstream Port Technology
Small enclosures require long ports to offer decent low-frequency performance. The unique port design of new Club enclosures efficiently limits the resulting air turbulence within the port, thus avoiding annoying port noise. The key benefit of our proprietary Slipstream port design is much higher output potential than with conventional ports and greatly reduced distortion – louder, cleaner bass.
Wedge Box with Rounded Corner Design
Club enclosures are designed in wedge box type with rounded corner which allows for flexible placement direction to get best performance and maximize the space in vehicle.
Removable Logo Badge
Club enclosures are designed with a removable logo badge so you can put anywhere you like.
Specifications:
Subwoofer: 1x 10” (250mm) Polypropylene Driver
Power Handling: 350W RMS, 1050W peak
Sensitivity (1W/1m): 83dB
Frequency Response (-6dB): 35Hz – 400Hz
Nominal Impedance: 2 ohms
Voice Coil Diameter: 2” (50mm)
Enclosure dimensions: 264.8mm D1 x 345.2mm D2 x 447mm W x 379mm H/ 10-7/16” D1 x 13-5/8” D2 x 17-5/8” W x 14-15/16” H
Enclosure materials: 11/16” (18mm) MDF with black carpet covering
What’s in the Box:
1x Subwoofer Enclosure
1x JBL logo badge
1x Owner’s Manual