Description
Included in this kit
This bundle includes a JBL CLUB-A6001A High performance mono subwoofer car amplifier, a Stinger SS1200XS 4GA Copper 1200W Complete Wiring Kit, and a JBL CLUB1000SSLSINGLE 10” Thin Subwoofer Enclosure with Passive Radiator.
1x JBL CLUB-A6001A High performance mono subwoofer car amplifier - (Club-A6001A)
The JBL Club A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
What’s in the box:
One Club A600 mono subwoofer car amplifier
Four 30A ATO fuses (2 installed, 2 spare)
2 Bare wire-to-RCA adapters
Remote bass control module
16.5' Remote control cable (RJ-25 plugs on both ends)
2 Self-tapping screws for remote (M3 x 15mm)
4 Mounting screws (M4 x 53mm)
Owner’s Manual
Two JBL stickers
1 logo badage
Technical specifications:
Mono subwoofer car amplifier
350 watts RMS x 1 at 4 ohms
(600 watts RMS x 1 at 2 ohms)
Class D amp technology
Variable low-pass filter (32–320 Hz, 12 dB/octave)
Variable bass boost (0-12dB at 45Hz)
Phase switch (0, 180 degrees)
Preamp and speaker-level inputs
Fuse rating: 30A x 2
8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
W x H x D = 220mm x 51.3mm x 180mm
W x H x D = 8-11/16" x 2-1/16" x 7-1/8"
1x Stinger SS1200XS 4GA Copper 1200W Complete Wiring Kit - (SS1200XS)
Featuring full copper construction for excellent current transfer to power-hungry amplifiers. Quality twisted pair interconnects for noise-free signal transfer. Also includes ultra-flexible speaker wire, remote turn-on, water-resistant high current fuse holder, and terminals for a complete installation package. All the necessary parts for installing your next 2 channel amplifier.
Includes:
17FT Translucent Blue Power Wire
3FT Translucent Silver Ground Wire
17FT Translucent Blue Twisted Pair RCA interconnects
3FT Black flex loom tubing
16FT Blue Remote Turn-on Wire
20FT Translucent Speaker Wire
1pc Mini-ANL/AFS Fuseholder & Fuse
1x JBL CLUB1000SSLSINGLE 10” Thin Subwoofer Enclosure with Passive Radiator - (CLUB1000SSL)
JBL’s Club 10” (250mm) and 12” (300mm) shallow subwoofer enclosure have been engineered using a sealed enclosure with down-firing Club shallow subwoofer and passive radiator. This approach delivers tight, accurate bass performance while taking up minimal space for installation into a broader variety of vehicle types and locations. The enclosure is designed with removable feet which allows for flexible placement direction to get best performance and optimize space per vehicle type. A removable logo badge is included allow you to put anywhere you like. Enclosure’s sturdy medium-density fiberboard construction and rugged black carpet covering allows it to resist stacking weight and take a beating. A metal bracket set also provided if customer would like to fix it tight in a vehicle.
Down-Firing Sealed Enclosure with a Passive Radiator JBL Club shallow enclosures are engineered with sealed, down-firing type and loaded with a passive radiator subwoofer and new Club shallow subwoofers. Such a design brings tighter, more accurate bass and takes up little space.
Technical Specifications
Subwoofer: 10” (250mm) Aluminum Driver
Power Handling: 350W RMS, 1050W peak
Sensitivity (1W/1m): 82.5dB
Frequency Response (-6dB): 35Hz – 400Hz
Nominal Impedance: 2 ohms
Voice Coil Diameter: 2” (50mm)
Enclosure dimensions: 334mm D x 630mm W x 115mm H/13-1/8” D x 24-7/8” W x 4-1/2” H
Enclosure materials: 3/4” (18mm) MDF with black carpet covering
What’s in the Box
1x Subwoofer Enclosure
1x JBL Logo Badge
4x Plastic Feet
4x Screw Washer
4x Hexalobular Socket Head M6*25 Screws
1x Quick Start Guide
2x Steel Plate + 8x M5*15 Screws