Description
Included in this kit
JL Audio Marine Bass Package includes M200/2, MX10IB3-SG-WLD-B, marine wire kit, and bass knob
This bundle includes:
- MX10IB3-SG-WLD-B - MX-Series 10-inch Marine Subwoofer Driver for Infinite-Baffle Use (175 W, 4 Ī©)
- M200/2 - Engineered specifically for powersports applications, the M200/2 amplifier employs our high-speed NexDā¢ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATVās or other utility vehicles.
- Wiring Kit - Includes a JL Audio XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery and JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect.
- JL Audio Marine Remote Bass Controller for MHX and HX amplifiers
Subwoofer
JL Audio MX10IB3-SG-WLD-B 10-inch Marine Subwoofer Driver, White Sport Grille with Blue LED, 4 Ohm
With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels. Purpose-engineered and built for real marine duty, the MX-Series infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications. Integrated into the Sport Grilleās frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the wooferās cone area with a lively blue glow, adding a dramatic visual experience to your high seas journey. The grilleās brilliant chrome finish, achieved through a unique multi-layer plating process, was developed through extensive testing to withstand the harsh sea environment for years to come. The MX10IB3 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a subwoofer driver that operates in a small sealed enclosure, select our M10W5, instead. Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.
Amplifier
JL Audio M200/2:2 Ch. Class D Full-Range Marine Amplifier 200 W
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 Ī© (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexDā¢ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The M200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
| Specifications | |
|---|---|
| Rated Continuous (RMS) Power @ 14.4 V | |
| @ 4 Ī© | 75 W RMS x 2 |
| @ 2 Ī© | 100 W RMS x 2 |
| Bridged @ 4Ī© | 200 W RMS x 1 |
| Rated Continuous (RMS) Power @ 12.5 V | |
| @ 4 Ī© | 60 W RMS x 2 |
| @ 2 Ī© | 90 W RMS x 2 |
| Bridged @ 4Ī© | 180 W RMS x 1 |
| General Specifications | |
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuseā¢) |
| Signal Processing | |
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Channel Input Mode Switch | Yes (2 ch.) |
| Pass-Through Preamp Output | None |
| Source Channel Selection for PreOuts | N/A |
| Physical Specifications | |
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
Wiring Kit
JL Audio XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery
Ideal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 12 feet (3.7 m) from battery, or closer. This kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
- Red 9 AWG Tinned Power Wire (with one Power Ring) - 2 ft (0.6 m)
- Red 9 AWG Tinned Power Wire (unterminated) - 10 ft (3 m)
- Yellow 9 AWG Tinned Ground Wire (with one Power Ring) - 12 ft (3.7 m)
- Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)
- 30 Amp MAXIĀ® Fuse and Fuse Holder - XD-MFBW-MAXI
- Four 4-inch wire tires
- 4mm hex wrench
JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect
- 2-channel Marine Audio Interconnect Cable - 12 ft. (3.66 m)
- Twisted-Pair Construction to Reject Noise
- Pure OFC Copper Conductors with Polyethylene Dielectrics
- Molded Connector Bodies
- Machined Brass Connector Elements
Bass Knob
JL Audio Marine Remote Bass Controller for MHX and HX amplifiers
Water-Resistant Remote Level Control for HX and MHX Monoblock Amplifiers or any JL Audio Monoblock with a āRemote Bass Controlā port. The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the JL Audio amplifiers.