Description
Included in this kit
JL Audio Marine Bass Package includes M600/1, 2 (1 PAIR) MX10IB3-SG-WLD-B, marine wire kit, and bass knob
This bundle includes:
- MX10IB3-SG-WLD-B - MX-Series 10-inch Marine Subwoofer Driver for Infinite-Baffle Use (175 W, 4 Ī©)
- M600/1 - This potent monoblock amplifier employs our high-speed NexDā¢ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis.
- Wiring Kit - Includes a JL Audio Marine Amplifier Power Connection System: 1 Amplifier, 50A, 20 ft. and JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect.
- JL Audio Marine Remote Bass Controller for MHX and HX amplifiers
Subwoofer
JL Audio MX10IB3-SG-WLD-B 10-inch Marine Subwoofer Driver, White Sport Grille with Blue LED, 4 Ohm
With appropriate system setup, the addition of a subwoofer allows your smaller main speakers to be free of the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels. Purpose-engineered and built for real marine duty, the MX-Series infinite-baffle subwoofers are designed to operate without a dedicated enclosure and are targeted towards moderate power applications. Integrated into the Sport Grilleās frame, the internal LED lighting assembly was meticulously designed to uniformly illuminate the wooferās cone area with a lively blue glow, adding a dramatic visual experience to your high seas journey. The MX10IB3 is best used with amplifier power in the 50W - 175W range and is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 56.6 l). If you need a subwoofer driver that operates in a small sealed enclosure, select our M10W5, instead. Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.
Amplifier
JL Audio M600/1:Monoblock Class D Marine Subwoofer Amplifier 600 W
This potent monoblock amplifier employs our high-speed NexDā¢ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 Ī© load (14.4V, 1% THD).
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
| Specifications | |
|---|---|
| Rated Continuous (RMS) Power @ 14.4 V | |
| @ 4 Ī© | 400 W RMS x 1 |
| @ 3 Ī© | 500 W RMS x 1 |
| @ 2 Ī© | 600 W RMS x 1 |
| @ 1.5 Ī© | N/A |
| Rated Continuous (RMS) Power @ 12.5 V | |
| @ 4 Ī© | 300 W RMS x 1 |
| @ 3 Ī© | 400 W RMS x 1 |
| @ 2 Ī© | 500 W RMS x 1 |
| @ 1.5 Ī© | N/A |
| General Specifications | |
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >1000 / 50 Hz |
| Damping Factor @ 2 Ī© | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 100 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuseā¢) |
| Signal Processing | |
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ (0 to +12 dB @ 45 Hz) | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional (HD-RLC) |
| Pass-Through Preamp Output | Buffered |
| Physical Specifications | |
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 4.6 lb / 2.06 kg |
Wiring Kit
JL Audio Marine Amplifier Power Connection System: 1 Amplifier, 50A, 20 ft.
Ideal for most Runabouts and Cruisers where amplifier location is 10-20 feet (3-6 m) from battery, or closer. This kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
- Red 6 AWG Tinned Power Wire (with one Power Ring) - 2 ft (0.6 m)
- Red 6 AWG Tinned Power Wire (unterminated) - 10 ft (3 m)
- Yellow 6 AWG Tinned Ground Wire (with one Power Ring) - 12 ft (3.7 m)
- Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)
- 50 Amp Marine Circuit Breaker - XMD-MCB-50
- Manual Reset Design with High-Visibility Switch (no fuses to blow)
- IP67 Rated: withstands full immersion in water up to 1 meter deep
- SAE J1171 External Ignition Protected: suitable for use in marine engine compartments and fuel tank locations
- Stainless steel connection points for corrosion-resistance
JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect
- 2-channel Marine Audio Interconnect Cable - 12 ft. (3.66 m)
- Twisted-Pair Construction to Reject Noise
- Pure OFC Copper Conductors with Polyethylene Dielectrics
- Molded Connector Bodies
- Machined Brass Connector Elements
Bass Knob
JL Audio Marine Remote Bass Controller for MHX and HX amplifiers
Water-Resistant Remote Level Control for HX and MHX Monoblock Amplifiers or any JL Audio Monoblock with a āRemote Bass Controlā port. The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the JL Audio amplifiers.