Description
Included in this kit
This bundle includes a JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W, a Clarion CMR-L1 Marine LED Light Controller, and 2x JL Audio M3-650X-S-Gm-i - M3 6.5" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles.
1x JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W - (XDM200/2)
JL Audio XDM200/2 2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ī© / 75 W x 2 @ 4 Ī© - 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexDā¢ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 75 W RMS x 2 |
| @ 2 Ī© | 100 W RMS x 2 |
| Bridged @ 4Ī© | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 60 W RMS x 2 |
| @ 2 Ī© | 90 W RMS x 2 |
| Bridged @ 4Ī© | 180 W RMS x 1 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Security Cover for Controls | Yes |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 174 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
ā¢ Dynamic Modes 20
ā¢ Dynamic Speed Levels 10
ā¢ Static Colors 20
ā¢ Direct Preset Colors 7
ā¢ Brightness Levels 8
ā¢ Operating Voltage 10- 15V DC
ā¢ Operating Temp Range -4 Ā° F to + 1 58 Ā° F, (-20 Ā°C to + 70 Ā°C)
ā¢ Operating Frequency 433.92 MHz
ā¢ Operating Range* Up to 15 m (49.2 ft)
ā¢ Output Capacity 2 A (maximum)
ā¢ Recommended Fuse Value 10 A (maximum)
ā¢ Transmitter Battery CR2025 (3V)
ā¢ Dimensions 2. 99 in x 2 in x 1 .07 in
ā¢ (Transmitter) 76 mm x 50.8 mm x 27.2 mm
ā¢ Dimensions 4.02 in x 3.01 in x 1.42 in
ā¢ (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
ā¢ Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
ā¢ To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
ā¢ Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
ā¢ *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
ā¢ For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.
2x JL Audio M3-650X-S-Gm-i - M3 6.5" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles - (M3-650X-S-Gm-i)
JL Audio M3-650X-S-Gm-i - M3 6.5" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles
6.5-inch coaxial system with 0.75-inch (19 mm) marine silk dome tweeters, 60W, 4 ohms
M3 Marine Coaxial Speakers - High-performance sound, engineered for real marine duty
Truly Engineered for Marine Duty
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.
Outstanding Sound Quality
ā¢ Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments.
ā¢ Long-excursion, high-efficiency woofers and treated silk dome tweeters deliver superior output capability with clear, high frequency detail.
ā¢ Integrated 2nd order, high-pass filter on tweeters, with solid-state protection circuit to minimize the possibility of tweeter failure.
Versatile Power Requirements
ā¢ Suitable for use with standard marine head-unit power.
ā¢ Designed to benefit with quality amplification, such as the JL Audio marine amplifiers.
Choose Your Look
ā¢ Available in two grille styles: āClassicā or āSportā, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
ā¢ Allows you to match the look of the speakers to the theme of the boat interior.
Built-In RGB LED Lighting
Included on this Sport grille model, multi-color LEDs are embedded within each speaker grille to produce vibrant accent lighting.
Choose from seven fixed-wiring lighting colors or connect a lighting controller accessory (sold separately) for adjustable control. (Separate 12V wiring is required to power the illumination.)
For optimal performance, we recommend using the JL Audio MLC-RW (Marine Lighting Controller).
General Specifications
| Continuous Power Handling (RMS) | 60 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 20 - 125 W / Ch. |
| System Efficiency | 89.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ī© |
| System Frequency Response | 55 Hz - 25 KHz Ā± 3 dB |
Coaxial Physical Specifications
| Frame Outer Diameter (A) | 6.90 in / 175 mm |
| Bolt Hole Circle Diameter (B) | 6.125 in / 155.5 mm |
| Motor Outer Diameter (C) | 3.85 in / 98 mm |
| Frontal Grille Protrusion* (D) | 0.973 in / 25 mm |
| Mounting Hole Diameter (E) | 5.00 - 5.25 in / 127 - 133 mm |
| Mounting Depth (F) | 2.74 in / 69.5 m |