Description
Included in this kit
This bundle includes a JL Audio XDM400/4 XDM Series 4-Channel Class-D Full Range Car/Marine Amplifier, 400 W, a JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver, and 4x JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually.
1x JL Audio XDM400/4 XDM Series 4-Channel Class-D Full Range Car/Marine Amplifier, 400 W - (XDM400/4)
JL Audio XDM400/4 4-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V
The ultra-compact XDM400/4 packs a serious full-range punch, generating a whopping 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM400/4 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Combine the XDM400/4 with JL Audio's XDM600/1 monoblock to build a stunning 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat or deck. Or, use the XDM400/4 by itself to power two satellites, plus a subwoofer.
The XDM400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the rear channels directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 75 W RMS x 4 |
| @ 2 Ω | 100 W RMS x 4 |
| Bridged @ 4Ω | 200 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 60 W RMS x 4 |
| @ 2 Ω | 90 W RMS x 4 |
| Bridged @ 4Ω | 180 W RMS x 2 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | 2 or All channels |
| Channel Input Mode Switch | Yes (2/4 ch.) |
| Pass-Through Preamp Output | Buffered |
| Source Channel Selection for PreOuts | Yes |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.3 lb / 2.86 kg |
1x JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver - (MBT-CRXv2)
JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver
Designed for marine and powersports applications, the MBT-CRXv2 Bluetooth® Controller/Receiver delivers your favorite music from a Bluetooth® equipped device directly to your audio system.
With an IP67 water resistance rating, the MBT-CRXv2 is ideal for small watercraft, motorcycles, ATV’s or other utility vehicles. Add Bluetooth® connectivity to any source unit with line-level/auxiliary inputs or connect directly to an amplifier and use it as a stand-alone source unit/receiver. Large LED backlit push-button controls are easy-to-see and easy-to-use, day or night. A small footprint and clever, one-hole design makes installation a breeze. An adaptor plate is also included for easy front mounting or where rear access is limited or not possible.
Equipped with Bluetooth® v4.0 and the aptX codec, the MBT-CRXv2 sends top-quality audio and performance from compatible devices to deliver dynamic, CD-like sound without any cables. With a wireless connection range of up to 35 ft., you can conveniently control the connected audio without returning to your Bluetooth® device. This means your device can stay safely tucked-away from the elements.
When you’re ready to set sail or tackle your next adventure, great sound is waiting for you with the MBT-CRXv2 Bluetooth® Audio Controller/Receiver.
* The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JL Audio is under license. * The aptX® word mark and logos are registered trademarks owned by CSR and any use of such marks by JL Audio is under license.
4x JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually - (M6-770X-L-GwGw)
JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually
Engineered for Real Marine Duty
• To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.Purpose-Built for the Finest Marine Vessels
• Low-profile mounting bezel with integrated tweeter bridge results in minimal intrusion into cabin space.• Flush-mount, fine mesh grille for a discreet visual appearance.
World-Class Sound Quality in Three Sizes
• Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments, and available in three speaker sizes: 6.5, 7.7 and 8.8 inches.• Long-excursion, DMA-optimized woofers and specific silk dome tweeters for each coaxial size produce superior output capability with impressive bass response and sparkling high frequency detail.
• Designed to operate with quality amplification, such as the JL Audio marine amplifiers.
Advanced Crossover Networks with Electronic Tweeter Protection
• Each woofer chassis features an integrated, multi-order, true 2-way crossover, specifically optimized for each speaker size.• Automatic, solid-state circuit monitors tweeter current to minimize the possibility of tweeter failure.
Specifications -
• Specifications: M6-770X-L-GwGw• Mounting Application: Infinite Baffle
• Continuous Power Handling (RMS Method)*: 100 Watts / channel
• Recommended Amplifier Power: 40 - 200 Watts / channel
• Frequency Response: 45 Hz - 25 KHz (± 3 dB)
• Efficiency @ 1W/1m: 91.0 dB
• One-Way, Linear Excursion (Xmax): N/A
• Nominal Impedance: 4 ohms
Features -
• Minimal protrusion into cabin space• Low-profile mounting bezel with integrated bridge for the treated, silk-dome tweeter
• Flush mount, fine mesh grille with marine-grade finish
• JL Audio M6 Marine Speaker Core
• Top-flight audio performance and durability in luxury marine installations.
• Low-profile, fine mesh grille for a discreet visual presentation.
• Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
• To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are true saltwater-rated products.