Description
Included in this kit
This bundle includes a JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W, a JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver, and 2x JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually.
1x JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W - (XDM200/2)
JL Audio XDM200/2 2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 75 W RMS x 2 |
| @ 2 Ω | 100 W RMS x 2 |
| Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 60 W RMS x 2 |
| @ 2 Ω | 90 W RMS x 2 |
| Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >150 / 50 Hz |
| Damping Factor @ 2 Ω | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Security Cover for Controls | Yes |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 6.85 in / 174 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver - (MBT-CRXv2)
JL Audio MBT-CRXv2: Weatherproof Bluetooth® Controller / Receiver
Designed for marine and powersports applications, the MBT-CRXv2 Bluetooth® Controller/Receiver delivers your favorite music from a Bluetooth® equipped device directly to your audio system.
With an IP67 water resistance rating, the MBT-CRXv2 is ideal for small watercraft, motorcycles, ATV’s or other utility vehicles. Add Bluetooth® connectivity to any source unit with line-level/auxiliary inputs or connect directly to an amplifier and use it as a stand-alone source unit/receiver. Large LED backlit push-button controls are easy-to-see and easy-to-use, day or night. A small footprint and clever, one-hole design makes installation a breeze. An adaptor plate is also included for easy front mounting or where rear access is limited or not possible.
Equipped with Bluetooth® v4.0 and the aptX codec, the MBT-CRXv2 sends top-quality audio and performance from compatible devices to deliver dynamic, CD-like sound without any cables. With a wireless connection range of up to 35 ft., you can conveniently control the connected audio without returning to your Bluetooth® device. This means your device can stay safely tucked-away from the elements.
When you’re ready to set sail or tackle your next adventure, great sound is waiting for you with the MBT-CRXv2 Bluetooth® Audio Controller/Receiver.
* The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JL Audio is under license. * The aptX® word mark and logos are registered trademarks owned by CSR and any use of such marks by JL Audio is under license.
2x JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually - (M6-770X-L-GwGw)
JL Audio M6-770X-L-GwGw M6 Luxe 7.7 Inch Marine Coaxial Speaker, 100W, 4 Ohms - Sold Individually
Engineered for Real Marine Duty
• To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.Purpose-Built for the Finest Marine Vessels
• Low-profile mounting bezel with integrated tweeter bridge results in minimal intrusion into cabin space.• Flush-mount, fine mesh grille for a discreet visual appearance.
World-Class Sound Quality in Three Sizes
• Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments, and available in three speaker sizes: 6.5, 7.7 and 8.8 inches.• Long-excursion, DMA-optimized woofers and specific silk dome tweeters for each coaxial size produce superior output capability with impressive bass response and sparkling high frequency detail.
• Designed to operate with quality amplification, such as the JL Audio marine amplifiers.
Advanced Crossover Networks with Electronic Tweeter Protection
• Each woofer chassis features an integrated, multi-order, true 2-way crossover, specifically optimized for each speaker size.• Automatic, solid-state circuit monitors tweeter current to minimize the possibility of tweeter failure.
Specifications -
• Specifications: M6-770X-L-GwGw• Mounting Application: Infinite Baffle
• Continuous Power Handling (RMS Method)*: 100 Watts / channel
• Recommended Amplifier Power: 40 - 200 Watts / channel
• Frequency Response: 45 Hz - 25 KHz (± 3 dB)
• Efficiency @ 1W/1m: 91.0 dB
• One-Way, Linear Excursion (Xmax): N/A
• Nominal Impedance: 4 ohms
Features -
• Minimal protrusion into cabin space• Low-profile mounting bezel with integrated bridge for the treated, silk-dome tweeter
• Flush mount, fine mesh grille with marine-grade finish
• JL Audio M6 Marine Speaker Core
• Top-flight audio performance and durability in luxury marine installations.
• Low-profile, fine mesh grille for a discreet visual presentation.
• Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
• To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are true saltwater-rated products.