Description
Included in this kit
This bundle includes a JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W, and a JL Audio M6-770X-C-3Gw 7.7 Inch M6 Marine Coaxial Speaker System, Gloss White, White Tweeter, Classic Grille.
1x JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W - (XDM200/2)
JL Audio XDM200/2 2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ω / 75 W x 2 @ 4 Ω - 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω | 75 W RMS x 2 |
@ 2 Ω | 100 W RMS x 2 |
Bridged @ 4Ω | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω | 60 W RMS x 2 |
@ 2 Ω | 90 W RMS x 2 |
Bridged @ 4Ω | 180 W RMS x 1 |
General Specifications
Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >150 / 50 Hz |
Damping Factor @ 2 Ω | >75 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
Fuse Rating | 20 A (AFS, AGU or MaxiFuse™) |
Signal Processing
Filter Mode(s) | Low-Pass or High-Pass |
Filter Slope(s) | 12 dB/octave |
Filter Frequency Range | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometer | Yes |
Filter Defeat Function | Yes |
Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
Security Cover for Controls | Yes |
Pass-Through Preamp Output | Buffered |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 6.85 in / 174 mm |
Depth (D) | 7.09 in / 180 mm |
Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio M6-770X-C-3Gw 7.7 Inch M6 Marine Coaxial Speaker System, Gloss White, White Tweeter, Classic Grille - (M6-770X-C-3Gw)
Engineered to deliver maximum audio performance, the M6-650X coaxial speakers feature a 6.5-inch frame design that is a direct fit replacement for most 6.5-inch marine speakers. Long excursion woofers and a high-efficiency design combine to produce impressive bass energy and clean mid-range dynamics for a speaker system capable of playing loud and clear in a powerboat at speed. Optimized for infinite-baffle operation, the M6-650X woofers are designed to operate without an enclosure behind them.
Features -
• Continuous Power Handling (RMS): 75 W
• Recommended Amplifier Power (RMS): 25 - 150 W / Ch.
• System Efficiency: 89.5 dB @ 1 W / 1 m
• System Nominal Impedance: 4 Ω
• System Frequency Response: 55 Hz - 25 KHz ± 3 dB
Physical Specifications -
• Frame Outer Diameter (A): 6.90 in / 175 mm
• Bolt Hole Circle Diameter (B): 6.13 in / 156 mm
• Frontal Grille Protrusion* (C): 0.94 in / 24 mm
• Mounting Hole Diameter (D): 5.00 - 5.25 in / 127 - 133 mm
• Mounting Depth (E): 3.00 in. / 76 mm