Description
Included in this kit
This bundle includes a JL Audio MV400/4i 4-channel Class D Full-Range Amplifier with integrated DSP, 100 W x 4 @ 2 ohm/75W x 4 @ 4 ohm - 14.4V, a Clarion CMR-L1 Marine LED Light Controller, and 2x JL Audio M3-770X-S-Gm-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles.
1x JL Audio MV400/4i 4-channel Class D Full-Range Amplifier with integrated DSP, 100 W x 4 @ 2 ohm/75W x 4 @ 4 ohm - 14.4V - (MV400/4i)
JL Audio MV400/4i 4-channel Class D Full-Range Amplifier with integrated DSP, 100 Watts x 4 @ 2 ohm / 75W x 4 @ 4 ohm - 14.4V
1x Clarion CMR-L1 Marine LED Light Controller - (CMR-L1)
The Clarion CMR-L1 Marine LED light controller adds some flair to Clarion and other RGB LED marine speakers!
Specifications:
• Dynamic Modes 20
• Dynamic Speed Levels 10
• Static Colors 20
• Direct Preset Colors 7
• Brightness Levels 8
• Operating Voltage 10- 15V DC
• Operating Temp Range -4 ° F to + 1 58 ° F, (-20 °C to + 70 °C)
• Operating Frequency 433.92 MHz
• Operating Range* Up to 15 m (49.2 ft)
• Output Capacity 2 A (maximum)
• Recommended Fuse Value 10 A (maximum)
• Transmitter Battery CR2025 (3V)
• Dimensions 2. 99 in x 2 in x 1 .07 in
• (Transmitter) 76 mm x 50.8 mm x 27.2 mm
• Dimensions 4.02 in x 3.01 in x 1.42 in
• (Receiver) 102.1 mm x 76.5 mm x 36.1 mm
Notes:
• Install in a dry, well-ventilated location; do not install in an engine compartment or other areas of extreme heat. Do not install where it will be directly exposed to the elements.
• To optimize performance, avoid confined installation locations or areas surrounded by metal; maintain at least 25 cm (10 in) of separation from any audio signal cables.
• Make sure the total amperage demands of all connected LED circuits does not exceed the output capacity of the controller.
• *Install a fuse (not included) at the main +12V power wire (Red) connection point that is appropriate for the total current draw of all LED circuits (up to 10 A).
• For short-circuit protection, we recommend installing a fuse (not included) at EACH speaker's +12V LED connection lead. Refer to your speaker's LED specifications for individual fuse values.
2x JL Audio M3-770X-S-Gm-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles - (M3-770X-S-Gm-i)
JL Audio M3-770X-S-Gm-i - M3 7.7" Marine Coaxial Speakers (pair) - LED Gunmetal Sport Grilles
7.7-inch coaxial system with 0.75-inch (19 mm) marine silk dome tweeters, 70W, 4 ohms
M3 Marine Coaxial Speakers - High-performance sound, engineered for real marine duty
Truly Engineered for Marine Duty
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.
Outstanding Sound Quality
• Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments.
• Long-excursion, high-efficiency woofers and treated silk dome tweeters deliver superior output capability with clear, high frequency detail.
• Integrated 2nd order, high-pass filter on tweeters, with solid-state protection circuit to minimize the possibility of tweeter failure.
Versatile Power Requirements
• Suitable for use with standard marine head-unit power.
• Designed to benefit with quality amplification, such as the JL Audio marine amplifiers.
Choose Your Look
• Available in two grille styles: “Classic” or “Sport”, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
• Allows you to match the look of the speakers to the theme of the boat interior.
Built-In RGB LED Lighting
Included on this Sport grille model, multi-color LEDs are embedded within each speaker grille to produce vibrant accent lighting.
Choose from seven fixed-wiring lighting colors or connect a lighting controller accessory (sold separately) for adjustable control. (Separate 12V wiring is required to power the illumination.)
For optimal performance, we recommend using the JL Audio MLC-RW (Marine Lighting Controller).
General Specifications
| Continuous Power Handling (RMS) | 70 W |
| Peak Music Power | 225 W |
| Recommended Amplifier Power (RMS) | 20 - 150 W / Ch. |
| System Efficiency | 90.5 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 Ω |
| System Frequency Response | 45 Hz - 25 KHz ± 3 dB |
Physical Specifications
| Frame Outer Diameter (A) | 7.70 in / 196 mm |
| Bolt Hole Circle Diameter (B) | 6.92 in / 176 mm |
| Motor Outer Diameter (C) | 4.27 in / 108 mm |
| Frontal Grille Protrusion* (D) | 1.00 in / 25 mm |
| Mounting Hole Diameter (E) | 6.25 in / 159 mm |
| Mounting Depth (F) | 3.15 in / 80 mm |