Description
Included in this kit
This bundle includes a JL Audio M6-880X-C-3Gw 8.8 Inch M6 Marine Coaxial Speaker System, Gloss White, White Tweeter, Classic Grille, a JL Audio XDM400/4 XDM Series 4-Channel Class-D Full Range Car/Marine Amplifier, 400 W, and a JL Audio MM50 - Weatherproof marine source unit with full color LCD display - 25 Watts x 4 @ 4 ohm.
1x JL Audio M6-880X-C-3Gw 8.8 Inch M6 Marine Coaxial Speaker System, Gloss White, White Tweeter, Classic Grille - (M6-880X-C-3Gw)
Engineered to deliver maximum audio performance, the M6-650X coaxial speakers feature a 6.5-inch frame design that is a direct fit replacement for most 6.5-inch marine speakers. Long excursion woofers and a high-efficiency design combine to produce impressive bass energy and clean mid-range dynamics for a speaker system capable of playing loud and clear in a powerboat at speed. Optimized for infinite-baffle operation, the M6-650X woofers are designed to operate without an enclosure behind them.
Features -
ā¢ Continuous Power Handling (RMS): 75 W
ā¢ Recommended Amplifier Power (RMS): 25 - 150 W / Ch.
ā¢ System Efficiency: 89.5 dB @ 1 W / 1 m
ā¢ System Nominal Impedance: 4 Ī©
ā¢ System Frequency Response: 55 Hz - 25 KHz Ā± 3 dB
Physical Specifications -
ā¢ Frame Outer Diameter (A): 6.90 in / 175 mm
ā¢ Bolt Hole Circle Diameter (B): 6.13 in / 156 mm
ā¢ Frontal Grille Protrusion* (C): 0.94 in / 24 mm
ā¢ Mounting Hole Diameter (D): 5.00 - 5.25 in / 127 - 133 mm
ā¢ Mounting Depth (E): 3.00 in. / 76 mm
1x JL Audio XDM400/4 XDM Series 4-Channel Class-D Full Range Car/Marine Amplifier, 400 W - (XDM400/4)
JL Audio XDM400/4 4-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 4 @ 2 Ī© / 75 W x 4 @ 4 Ī© - 14.4V
The ultra-compact XDM400/4 packs a serious full-range punch, generating a whopping 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexDā¢ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM400/4 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Combine the XDM400/4 with JL Audio's XDM600/1 monoblock to build a stunning 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat or deck. Or, use the XDM400/4 by itself to power two satellites, plus a subwoofer.
The XDM400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the rear channels directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 75 W RMS x 4 |
| @ 2 Ī© | 100 W RMS x 4 |
| Bridged @ 4Ī© | 200 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 60 W RMS x 4 |
| @ 2 Ī© | 90 W RMS x 4 |
| Bridged @ 4Ī© | 180 W RMS x 2 |
General Specifications
| Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 40 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass or High-Pass |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometers | Yes |
| Filter Defeat Function | Yes |
| Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Level Modes | 2 or All channels |
| Channel Input Mode Switch | Yes (2/4 ch.) |
| Pass-Through Preamp Output | Buffered |
| Source Channel Selection for PreOuts | Yes |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.3 lb / 2.86 kg |
1x JL Audio MM50 - Weatherproof marine source unit with full color LCD display - 25 Watts x 4 @ 4 ohm - (MM50)
Engineered for real-world marine duty
ā¢ Weatherproof (IP66 rated) design and construction to withstand the elements
ā¢ Easy-to-read, high-brightness, 2.8-inch full-color LCD display with separate day/night lighting and display themes
ā¢ Intuitive interface with large, easy-to-use backlit controls for marine applications
ā¢ Independent user settings for display brightness, button brightness and remote brightness
Flexible zone controls give you complete command of your marine listening experience
ā¢ 6-channels of audiophile quality, 4V RMS preamp level outputs from two independent main zones, plus a dedicated subwoofer zone; all zones feature a zero-clipping audio circuit design, with self-limiting tone controls to prevent speaker system damage.
ā¢ Configurable Master Volume Control with independent feature/control options:
- Level Controls: Manage volume levels, together or individually, at any time. A fixed output mode is also available.
- Tone Controls: Bass, Midrange, Treble and Balance, independent or linked with Zone 1
- Rename Zone: Customize the names of each main zone or select from a list
- Max Volume Limit: Set a custom volume level limit for each main zone
ā¢ Built-in amplifier generates 100 watts of high-fidelity output (25W RMS x 4) to power two main zones
ā¢ Both main zone output types (speaker and preamp level) include a high-pass crossover feature with selectable frequency selection (off/60/80/100/150 Hz)
ā¢ Subwoofer zone outputs equipped with a 500 Hz low-pass crossover
Built for todayās modern media with multiple connectivity options
ā¢ Digital AM/FM tuner with RDS (Radio Data System) display info, where available
ā¢ Store up to 18 of your favorite AM/FM stations
ā¢ BluetoothĀ® streams top-quality audio from compatible devices
ā¢ USB 2.0 direct-digital connection accesses music files on your USB storage device or compatible iPhoneĀ®, plus 2.1A USB charging output
ā¢ Auxiliary inputs accept audio signals from a wide range of audio sources
ā¢ NMEA 2000Ā® Certified - MFD (Multi-Function Display) control functionality using applicable network cables and connectors (sold separately).
ā¢ Customizable naming displayed on BluetoothĀ® devices and MFDs
ā¢ Three remote controller options: (each sold separately)