Description
Included in this kit
This bundle includes a JL Audio HD-RLC:Amplifier Remote Level Control and Cable, a JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W, and a JL Audio PES110-TW1-4 - 10-inch StowAway Loaded Subwoofer Enclosure, Sealed (300W, 4 ohm).
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)
JL Audio HD-RLC:Ā Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
1x JL Audio XDM200/2 XDM Series 2-Channel Class-D Full Range Car/Marine Amplifier, 200 W - (XDM200/2)
JL Audio XDM200/2 2-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 2 @ 2 Ī© / 75 W x 2 @ 4 Ī© - 14.4V
The tiny XDM200/2 packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is JL Audio's advanced NexDā¢ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency.
Suitable for car or boat installations, the XDM200/2 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
The XDM200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or cockpit.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ī© | 75 W RMS x 2 |
@ 2 Ī© | 100 W RMS x 2 |
Bridged @ 4Ī© | 200 W RMS x 1 |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ī© | 60 W RMS x 2 |
@ 2 Ī© | 90 W RMS x 2 |
Bridged @ 4Ī© | 180 W RMS x 1 |
General Specifications
Frequency Response | 12 Hz - 22 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ī© | >150 / 50 Hz |
Damping Factor @ 2 Ī© | >75 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
Fuse Rating | 20 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
Filter Mode(s) | Low-Pass or High-Pass |
Filter Slope(s) | 12 dB/octave |
Filter Frequency Range | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometer | Yes |
Filter Defeat Function | Yes |
Remote Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
Security Cover for Controls | Yes |
Pass-Through Preamp Output | Buffered |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 6.85 in / 174 mm |
Depth (D) | 7.09 in / 180 mm |
Net Weight | 3.75 lb / 1.70 kg |
1x JL Audio PES110-TW1-4 - 10-inch StowAway Loaded Subwoofer Enclosure, Sealed (300W, 4 ohm) - (PES110-TW1-4)
JL Audio PES110-TW1-4 Single 10TW1 StowAwayā¢ Subwoofer
Enhance your audio experience with the JL Audio PES110-TW1-4, a rugged, all-weather subwoofer system designed to deliver exceptional bass performance in unconventional applications. This compact, sealed enclosure features a single 10TW1-4 subwoofer and is built to withstand the elements, making it perfect for various installation scenarios.
Key Features
- All-Weather Durability: Constructed from marine-grade materials for reliable performance in challenging environments.
- Compact Design: Utilizes the small box requirements of the TW1 driver to deliver powerful, smooth, and articulate bass.
- Down-Firing Hard-Shell Enclosure: Ideal for mounting in cargo areas or exposed locations, ensuring robust bass output.
- Slotted Mounting Feet: Located at each corner of the enclosure for easy "off-the-floor" installations and tight spaces.
- Prewired with Selectable Harness Exits: Located underneath at opposite ends for flexible installation options.
- Finish: Black texture with a debossed logo on top; includes a protective mesh grille for the subwoofer.
- Recommended Amplifier Power: 75ā300 watts.
- Nominal Impedance: 4 ohms.
Specifications
- Model: PES110-TW1-4
- Driver: Single 10TW1-4 subwoofer
- Power Handling: 300 watts
- Impedance: 4 ohms
- Finish: Black texture
- Included: Protective mesh grille
Installation Notes
Mounting hardware is not included with StowAway systems. The installation method and mounting hardware will vary based on your specific application. Ensure the enclosure is securely affixed to prevent movement and vibration.
Experience rock-solid bass performance with the JL Audio PES110-TW1-4, engineered for versatile and all-weather applications. This compact and durable subwoofer system is perfect for enhancing your vehicle's audio system in any environment.
General Specifications
Continuous Power Handling (RMS) | 300 W |
System Nominal Impedance | 4 Ī© |
Enclosure Type |
Sealed |
Finish | Black Texture |
Grille Included | Yes |
Physical Specifications
Height (H) | 7.0 in / 178 mm |
Width (W) | 18.0 in / 457 mm |
Depth (D) | 12.5 in / 318 mm |
Mounting Location Depth (A) | 10.66 in / 271 mm |
Mounting Location Width (B) | 16.16 in / 410 mm |