Description
Included in this kit
This bundle includes a JL Audio VX800/8i 8-channel Class D Amplifier with integrated DSP, 100 Watts x 8 @ 2 ohm / 75 Watts x 8 @ 4 ohm - 14.4V, 2x JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included, 2x JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included, and 2x JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included.
1x JL Audio VX800/8i 8-channel Class D Amplifier with integrated DSP, 100 Watts x 8 @ 2 ohm / 75 Watts x 8 @ 4 ohm - 14.4V - (VX800/8i)
8-Channel Class D Full-Range Amplifier with Integrated DSP, 100 W x 8 @ 2 Ī© / 75 W x 8 @ 4 Ī© - 14.4V
Designed to simplify great audio, every VXi amplifier combines our advanced NexD2ā¢ switching amplifier technology with an integrated, full-featured digital signal processor.
With our second-generation NexD2ā¢ technology, the VX800/8i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms to deliver a powerful 200 W x 4.
The NexD2ā¢ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFETā¢ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TĆ¼Nā¢ Software application installed.
Amplifier includes: Power Connector (for 2 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harnesses (2), 6 ft A/B USB Cable
Features
TĆ¼NTM Software Applications
Intuitive setup and tuning, all at your fingertips. Automatically recognizes connected amplifier and displays appropriate interface. TĆ¼Nā¢ is available for download for free in a variety of applications, for computers and most handheld devices.
Unprecedented, Onboard DSP Tuning Power
- Premium, triple-core AKMĀ® DSP with an optimized configuration, developed in collaboration with AKMĀ®
- Hi-Res audio processing at 24 bit/96 kHz
- High-performance AKMĀ® A/D and D/A converters
- 10 Bands of fully parametric EQ, per output channel, including pre-outs
- Shelving EQ option for Band 1 and Band 10
- High-Pass & Low-Pass Filters for each output channel, with selectable alignments and slopes:
Linkwitz-Riley: 12, 24, 48 dB/octave
Butterworth: 6, 12, 18, 24, 36, 48 dB/octave - Signal Delay in 0.01 millisecond steps (equivalent to 1/8-inch, 3 mm)
- All-Pass Filter (Phase EQ), with variable "Q" and corner frequency
- Polarity Reversal (0 or 180 deg.)
- Output Level Trim in 0.1 dB steps
NexD2TM Switching Amplifier Technology
- Our latest generation of high-speed switching technology delivers superb low frequency power and efficiency.
- Specially optimized for subwoofer applications
Ultra-Versatile Analog and Digital Inputs
- High-performance, differential-balanced analog inputs for outstanding noise rejection
- Accepts speaker level signals from 200 mV, up to 16V RMS, including those from many factory systems
- Optical Digital (Toslink) input permits direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input.
- Independently configurable RCA analog and digital pre-outs (24 bit/96 kHz)
- Automatic turn-on options via Signal-Sensing or DC-Offset sensing
Functional Compact Chassis Design
- Solid cast alloy main unibody and bottom plate deliver superb EMI performance and shielding
- All connections utilize compact mating connectors for maximum integrity and fitment into tight spaces.
- Configurable LED logo ring displays status and can display audio preset color code or user-defined color
- Logo badge can be oriented in 90 degree increments
- Corner caps engineered to conceal mounting holes and hardware
JLidTM System Command and Control with Networking Capabilities
JL Audio's digital protocol provides control interface and communication between VXi amplifiers and optional JLidTM accessories, including:
- DRC-100/DRC-200/DRC-205 Digital Remote Controllers: Offers convenient level and DSP preset control from the driver's seat.
- VXi-BTC BluetoothĀ® Communicator: Permits wireless configuration of VXi amplifiers using your compatible AppleĀ® or AndroidĀ® device.
- VXi-HUB Optical Network Hub: Provides network connectivity for up to five slave VXi amplifiers, allowing synchronization of DRC controllers and DSP presets. Up to two VXi-HUBs can be daisy-chained to network up to ten VXi amplifiers.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play is a trademark of Google LLC.
Android is a trademark of Google LLC.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 75 W RMS x 8 |
| @ 2 Ī© | 100 W RMS x 8 |
| Bridged @ 4Ī© | 200 W RMS x 4 |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 60 W RMS x 8 |
| @ 2 Ī© | 90 W RMS x 8 |
| Bridged @ 4Ī© | 180 W RMS x 4 |
General Specifications
| Frequency Response | 12 Hz - 24 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power (Analog Inputs) |
99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Analog Inputs) |
80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to highest rated power (Digital Inputs) |
101 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W (Digital Inputs) |
82 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >100 / 50 Hz |
| Damping Factor @ 2 Ī© | >50 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 16 V RMS |
| Min.Copper Power / Ground Wire Gauge | 2 AWG wire |
| Fuse Rating | 80 A (AFS, AGU or MaxiFuseā¢) |
Physical Specifications
| Height (H) | 2.12 in / 54 mm |
| Width (W) | 11.32 in / 287 mm |
| Depth (D) | 6.62 in / 168 mm |
| Net Weight | 6.5 lb / 2.95 kg |
2x JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included - (C7-650cw)
JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included
Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high frequency behavior. Suspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a NomexĀ®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cwās outstanding excursion capability. Motor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontiumferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driverās performance range. A 32 mm (1.27 inch) diameter, overhung voice coil is employed, wound with copper wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area, and our Patented Elevated Frame Cooling technology. Design Bandwidth: With 48 dB/octave filters: 50 Hz - 5 kHz With 24 dB/octave filters: 60 Hz - 5 kHz With 12 dB/octave filters: 70 Hz - 5 kHz Built in USA with Global Components.
Sold individually, with a cast-alloy grille tray and a specially perforated steel grille insert.
C7-650cw Specifications Impedance
Speaker Type: Component Woofer
Nominal Diameter: 6.5 in. (165 mm)
Design Bandwidth: 50 Hz - 5 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 125W
Recommended Amplifier Power: 50-175W
Net Weight: 3.28 lbs. (1.49 kg)
Driver Rear Displacement: 0.0135 cu.ft. (0.382 liters)
Min. Recommended Sealed
Enclosure: 0.424 cu.ft. (12 liters)
Parameters:
Voice Coil Resistance (Re): 3.114 ohms
Free Air Resonance (Fs): 54.5 Hz
Reference Efficiency (no): 0.304%
Efficiency @ 1W/1m: 87.0 dB SPL
Sensitivity @ 2.83V/1m: 90.0 dB SPL
Electrical āQā (Qes): 0.669
Mechanical āQā (Qms): 6.265
Total Speaker āQā (Qts): 0.605
Equivalent Compliance (Vas): 0.461 cu.ft. (13.05 liters)
Moving Mass (Mms): 17.679 g
Mechanical Compliance (Cms): 0.000482 m/N
Magnetic Strength (BL): 5.31 N/A
Effective Piston Area (Sd): 21.4 sq.in. (0.013807 sq. m)
One-Way Linear Excursion (Xmax): 5 mm
2x JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included - (C7-350cm)
JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included
Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A concave dust cap further improves high frequency behavior.
Suspension design: The moving assembly is suspended and damped via a linear profile spider formed from a NomexĀ®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting excursion.
Motor Design: The C7-350cm employs a high-density magnetic circuit with a high-grade, neodymium magnet, and a specially machined, U-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driverās performance range.
A 36 mm (1.42 inch) diameter, overhung voice coil is employed, wound with copper-clad aluminum wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels.
Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area.
Design Bandwidth:
With 48 dB/octave filters: 300 Hz - 6,000 Hz
With 24 dB/octave filters: 400 Hz - 5000 Hz
With 12 dB/octave filters: 500 Hz - 4000 Hz
Built in USA with Global Components
Sold individually, with a cast-alloy grille tray and a specially perforated steel grille insert.
C7-350cm Specifications
Speaker Type: Component Midrange
Nominal Diameter: 3.5 in. (90 mm)
Design Bandwidth: 300 Hz - 10 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 100W
Recommended Amplifier Power: 50-150W
Net Weight: 0.71 lbs. (0.32 kg)
Driver Rear Displacement: 0.0024 cu.ft. (0.068 liters)
Min. Recommended Sealed Enclosure: 0.014 cu.ft. (0.4 liters)
Parameters:
Voice Coil Resistance (Re): 3.245 ohms
Free Air Resonance (Fs): 156.9 Hz
Reference Efficiency (no): 0.270%
Efficiency @ 1W/1m: 86.5 dB SPL
Sensitivity @ 2.83V/1m: 89.5 dB SPL
Electrical āQā (Qes): 0.590
Mechanical āQā (Qms): 6.454
Total Speaker āQā (Qts): 0.541
Equivalent Compliance (Vas): 0.015 cu.ft. (0.430 liters)
Moving Mass (Mms): 4.009 g
Mechanical Compliance (Cms): 0.000257 m/N
Magnetic Strength (BL): 4.66 N/A
Effective Piston Area (Sd): 5.31 sq.in. (0.003426 sq. m)
One-Way Linear Excursion (Xmax): 1 mm
2x JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included - (C7-100ct)
JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included
Dome Diaphragm: Corundum ceramic coated aluminum alloy diaphragm exhibits high stiffness, very low mass and excellent environmental stability. It also helps the tweeter dome to hold its shape and operate as a true piston at higher frequencies, without a penalty in moving mass.
Suspension design: The diaphragmās motion is centered, sprung and damped by a treated silk, s-roll surround. Ferrofluid in the magnetic gap acts as a rear suspension element in this design. The two combine to provide optimum damping without unduly restricting excursion.
Motor Design: The C7-100ct employs a high-density magnetic circuit with a neodymium magnet and U-Yoke motor topology. An under-hung voice coil is employed, wound with copper-clad aluminum wire onto an aluminum voice coil former. Motor magnetics have been precisely optimized utilizing advanced FEA tools to lower even order distortion and IMD/AMD.
Acoustical Design: The shape of the tweeter housing is designed to boost sensitivity in a very specific bandwidth, helping to flatten the frequency response. It also provides improved control of directivity. Design Bandwidth:
With 48 dB/octave filters: 3,000 Hz - 30,000 Hz
With 24 dB/octave filters: 4,000 Hz - 30,000 Hz
With 12 dB/octave filters: 5,000 Hz - 30,000 Hz
Sold individually, with flush and surface mounting fixtures and hardware. One tweeter protection capacitor is also included.
C7-100ct Specifications
Speaker Type: Component Tweeter
Nominal Diameter: 1 in. (25 mm)
Design Bandwidth: 3 kHz - 30 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 100W
Recommended Amplifier Power: 50-150W
Net Weight: 0.25 lbs. (110 g)
Parameters:
Voice Coil Resistance (Re): 3.20 ohms
Free Air Resonance (Fs): 1450 Hz
Reference Efficiency (no): 0.267%
Efficiency @ 1W/1m: 86.5 dB SPL
Sensitivity @ 2.83V/1m: 89.5 dB SPL