Included in this kit

---

This bundle includes 2x JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included, 2x JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included, 2x JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included, and 1x JL Audio VX600/6i 6-channel Class D Amplifier with integrated DSP, 100 Watts x 6 @ 2 ohm / 75W x 6 @ 4 ohm - 14.4V.

2x JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included - (C7-650cw)

JL Audio C7-650cw 6.50-inch (165mm) Component Woofer Grille included

Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high frequency behavior. Suspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cw’s outstanding excursion capability. Motor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontiumferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver’s performance range. A 32 mm (1.27 inch) diameter, overhung voice coil is employed, wound with copper wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area, and our Patented Elevated Frame Cooling technology. Design Bandwidth: With 48 dB/octave filters: 50 Hz - 5 kHz With 24 dB/octave filters: 60 Hz - 5 kHz With 12 dB/octave filters: 70 Hz - 5 kHz Built in USA with Global Components.

Sold individually, with a cast-alloy grille tray and a specially perforated steel grille insert.

C7-650cw Specifications Impedance
Speaker Type: Component Woofer
Nominal Diameter: 6.5 in. (165 mm)
Design Bandwidth: 50 Hz - 5 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 125W
Recommended Amplifier Power: 50-175W
Net Weight: 3.28 lbs. (1.49 kg)
Driver Rear Displacement: 0.0135 cu.ft. (0.382 liters)
Min. Recommended Sealed
Enclosure: 0.424 cu.ft. (12 liters)

Parameters:
Voice Coil Resistance (Re): 3.114 ohms
Free Air Resonance (Fs): 54.5 Hz
Reference Efficiency (no): 0.304%
Efficiency @ 1W/1m: 87.0 dB SPL
Sensitivity @ 2.83V/1m: 90.0 dB SPL
Electrical “Q” (Qes): 0.669
Mechanical “Q” (Qms): 6.265
Total Speaker “Q” (Qts): 0.605
Equivalent Compliance (Vas): 0.461 cu.ft. (13.05 liters)
Moving Mass (Mms): 17.679 g
Mechanical Compliance (Cms): 0.000482 m/N
Magnetic Strength (BL): 5.31 N/A
Effective Piston Area (Sd): 21.4 sq.in. (0.013807 sq. m)
One-Way Linear Excursion (Xmax): 5 mm

2x JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included - (C7-350cm)

JL Audio C7-350cm 3.5-inch (90mm) Component Midrange Driver Grille included

Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A concave dust cap further improves high frequency behavior.
Suspension design: The moving assembly is suspended and damped via a linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting excursion.
Motor Design: The C7-350cm employs a high-density magnetic circuit with a high-grade, neodymium magnet, and a specially machined, U-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver’s performance range.
A 36 mm (1.42 inch) diameter, overhung voice coil is employed, wound with copper-clad aluminum wire onto a fiberglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels.
Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area.

Design Bandwidth:
With 48 dB/octave filters: 300 Hz - 6,000 Hz
With 24 dB/octave filters: 400 Hz - 5000 Hz
With 12 dB/octave filters: 500 Hz - 4000 Hz
Built in USA with Global Components

Sold individually, with a cast-alloy grille tray and a specially perforated steel grille insert.

C7-350cm Specifications
Speaker Type: Component Midrange
Nominal Diameter: 3.5 in. (90 mm)
Design Bandwidth: 300 Hz - 10 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 100W
Recommended Amplifier Power: 50-150W
Net Weight: 0.71 lbs. (0.32 kg)
Driver Rear Displacement: 0.0024 cu.ft. (0.068 liters)
Min. Recommended Sealed Enclosure: 0.014 cu.ft. (0.4 liters)
Parameters:
Voice Coil Resistance (Re): 3.245 ohms
Free Air Resonance (Fs): 156.9 Hz
Reference Efficiency (no): 0.270%
Efficiency @ 1W/1m: 86.5 dB SPL
Sensitivity @ 2.83V/1m: 89.5 dB SPL
Electrical “Q” (Qes): 0.590
Mechanical “Q” (Qms): 6.454
Total Speaker “Q” (Qts): 0.541
Equivalent Compliance (Vas): 0.015 cu.ft. (0.430 liters)
Moving Mass (Mms): 4.009 g
Mechanical Compliance (Cms): 0.000257 m/N
Magnetic Strength (BL): 4.66 N/A
Effective Piston Area (Sd): 5.31 sq.in. (0.003426 sq. m)
One-Way Linear Excursion (Xmax): 1 mm

2x JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included - (C7-100ct)

JL Audio C7-100ct 1-inch (19mm) Corundum ceramic-coated, aluminum dome tweeter Grille included

Dome Diaphragm: Corundum ceramic coated aluminum alloy diaphragm exhibits high stiffness, very low mass and excellent environmental stability. It also helps the tweeter dome to hold its shape and operate as a true piston at higher frequencies, without a penalty in moving mass.
Suspension design: The diaphragm’s motion is centered, sprung and damped by a treated silk, s-roll surround. Ferrofluid in the magnetic gap acts as a rear suspension element in this design. The two combine to provide optimum damping without unduly restricting excursion.
Motor Design: The C7-100ct employs a high-density magnetic circuit with a neodymium magnet and U-Yoke motor topology. An under-hung voice coil is employed, wound with copper-clad aluminum wire onto an aluminum voice coil former. Motor magnetics have been precisely optimized utilizing advanced FEA tools to lower even order distortion and IMD/AMD.
Acoustical Design: The shape of the tweeter housing is designed to boost sensitivity in a very specific bandwidth, helping to flatten the frequency response. It also provides improved control of directivity. Design Bandwidth:
With 48 dB/octave filters: 3,000 Hz - 30,000 Hz
With 24 dB/octave filters: 4,000 Hz - 30,000 Hz
With 12 dB/octave filters: 5,000 Hz - 30,000 Hz

Sold individually, with flush and surface mounting fixtures and hardware. One tweeter protection capacitor is also included.

C7-100ct Specifications
Speaker Type: Component Tweeter
Nominal Diameter: 1 in. (25 mm)
Design Bandwidth: 3 kHz - 30 kHz
Nominal Impedance (Znom): 4 ohms
Continuous Power Handling: 100W
Recommended Amplifier Power: 50-150W
Net Weight: 0.25 lbs. (110 g)
Parameters:
Voice Coil Resistance (Re): 3.20 ohms
Free Air Resonance (Fs): 1450 Hz
Reference Efficiency (no): 0.267%
Efficiency @ 1W/1m: 86.5 dB SPL
Sensitivity @ 2.83V/1m: 89.5 dB SPL

1x JL Audio VX600/6i 6-channel Class D Amplifier with integrated DSP, 100 Watts x 6 @ 2 ohm / 75W x 6 @ 4 ohm - 14.4V - (VX600/6i)

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.

With our second-generation NexD2™ technology, the VX600/6i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up a rock-solid 200 W x 3.

The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.

Unprecedented, Onboard DSP Tuning Power: • Powerful DSP permits optimizing each channel’s timing, frequency response and output levels, for exceptional sound quality.
• TüN™ Software delivers fast and easy setup, at your fingertips. Make all adjustments with a clear interface. Free TüN™ software is available for computers and most handheld devices.
• 2nd-Gen NexD2™ Switching Amplifier Technology

Advanced, high-speed switching technology delivers reference-grade power and efficiency: • DSP-synchronized power supply and output channels produce world-class sound quality with very low noise and distortion.
• Ultra-Versatile Analog and Digital Inputs/Outputs


Differential-Balanced Analog Inputs accept speaker level signals up to 16V RMS, including those from factory systems. Delivers outstanding noise rejection to prevent alternator whine and other noises: • Optical Digital (Toslink) Inputs permit direct connection of S/PDIF digital sources, bypassing A/D converter. Accepts up to 24 bit/192 kHz input.
• Analog and Digital Pre-Outs (pass-through or fully configurable): RCA Pre-Outs (4V RMS Max) and Optical (Toslink) Output at 24 bit/96 kHz
• Automatic turn-on options via signal-sensing or DC-offset sensing