Included in this kit

---

This bundle includes a JL Audio JD250/1 Monoblock Class D Subwoofer Amplifier, 250 W, and a JL Audio XD-ACS30:Amplifier Connection Kit 30 A capacity Single Amplifier.

1x JL Audio JD250/1 Monoblock Class D Subwoofer Amplifier, 250 W - (JD250/1)

JL Audio JD250/1: Monoblock Class D Subwoofer Amplifier 250 W

JD Amplifiers redefine a high-value package in terms of performance and efficiency. JL Audio’s NexD™ switching technology and clipping indicators (for ease in setting Input Sensitivity), add tremendous bang for your buck. Their dual-range, differential-balanced inputs minimize noise, while maximizing compatibility with a wide range of signal levels. Monoblock models also include variable bass boost and Remote Level Control capability when used with an optional RBC-1 Remote Bass Control.

Rated Continuous (RMS) Power @ 14.4 V
• @ 4 Ω: 150 W RMS x 1
• @ 3 Ω: 200 W RMS x 1
• @ 2 Ω: 250 W RMS x 1

General Specifications
• JD250/1: 11.40 x 7.50 x 2.10 in. (290 x 190 x 53 mm)
• Frequency Response: 10 Hz - 150 Hz (+0, -1dB)
• S/N Ratio, referred to highest rated power: >97 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W: >76 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω: >1000 / 50 Hz
• Damping Factor @ 2 Ω: >500 / 50 Hz
• THD+N @ Rated Power: Less Than 1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs: 200 mV - 4 V RMS
• Input Voltage Range @ High-Level Inputs: 2 V - 10 V RMS
• Min.Copper Power / Ground Wire Gauge: 8 AWG wire
• Fuse Rating: 30 A (AFS, AGU or MaxiFuse™)

Signal Processing
• Filter Mode(s): Low-Pass only
• Filter Slope(s): 12 dB/octave
• Filter Frequency Range: 50 Hz - 200 Hz
• Detented, Calibrated Filter Freq. Potentiometer: No
• Filter Defeat Function: No
• Infrasonic Filter: none
• Bass Boost EQ: 0 to +12 dB @ 45 Hz
• Output Polarity Switch: No
• Remote Subwoofer Level Control: Optional (RBC-1)
• Remote Bass EQ Boost Control: No
• Pass-Through Preamp Output: Buffered

1x JL Audio XD-ACS30:Amplifier Connection Kit 30 A capacity Single Amplifier - (XD-ACS30)

JL Audio XD-ACS30: Amplifier Connection Kit 30 A capacity Single Amplifier

Core 12V - 30A Connection System for One Amplifier

Everything you need to make secure, high-integrity connections to a single amplifier with up to a 30A fuse rating. Our compact Maxi® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. To complete your installation, you will also find an 18 ft. (5.5 m), 2-Channel Audio Interconnect Cable and a generous length of speaker cable in this system.

What's in the kit?



XD-MFB-MAXI Fuse Holder with Genuine 30A Maxi® Fuse

17 ft (5.18 m) Red 30A Core Power Wire, terminated with ring

3 ft (0.91 m) Black 30A Core Ground Wire, terminated with ring

17 ft (5.18 m) Blue Remote Turn-On Lead Wire

25 ft (7.62 m) Blue Speaker Cable

XD-CLRAIC2-18 2-channel, 18 ft. (5.5 m) Audio Interconnect Cable

Self-Tapping Ground Screw

Rubber Firewall Grommet

Nylon Wire Ties

Hex Wrench for Fuse Holder

This kit is appropriate for single amplifiers with fuse ratings from 15A to 30A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate Maxi® fuse separately.