Description
Included in this kit
This bundle includes 2x JL Audio 8W3v3-4:8-inch (200 mm) Subwoofer Driver 4 Ohm, and a JL Audio XD400/4: 4 Ch. Class D Full-Range Amplifier 400 W.
2x JL Audio 8W3v3-4:8-inch (200 mm) Subwoofer Driver 4 Ohm - (8W3v3-4)
JL Audio 8W3v3-4: 8-inch (200 mm) Subwoofer Driver 4 Ω
W3v3 8-inch Subwoofer Driver (250 W, 4 Ω)
If you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.
The 8W3v3-4 is best used with amplifier power in the 75W - 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
1x JL Audio XD400/4: 4 Ch. Class D Full-Range Amplifier 400 W - (XD400/4)
This is a closeout product
JL Audio XD400/4: 4 Ch. Class D Full-Range Amplifier 400 W
4-Channel Class D Full-Range Amplifier, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
Use the XD400/4 in combination with our XD600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat. Or, use the XD400/4 by itself to power two satellites, plus a subwoofer. With XD's, the possibilities are endless.
The XD400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's Ch. 1 & 2 level or overall level can be directly controlled from the driver's seat.
This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.