Description
Included in this kit
This bundle includes a JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W, and 2x JL Audio M6-10IB-L-SbSb-4 10-inch (250 mm) Marine Subwoofer Driver, Black Trim Ring, Black Luxe Grille, 4 Ī©.
1x JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W - (XDM600/1)
JL Audio XDM600/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ī© / 400 W x 1 @ 4 Ī© - 14.4V
This potent monoblock amplifier employs JL Audio's high-speed NexDā¢ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captainās chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 400 W RMS x 1 |
| @ 3 Ī© | 500 W RMS x 1 |
| @ 2 Ī© | 600 W RMS x 1 |
| @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 300 W RMS x 1 |
| @ 3 Ī© | 400 W RMS x 1 |
| @ 2 Ī© | 500 W RMS x 1 |
| @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >1000 / 50 Hz |
| Damping Factor @ 2 Ī© | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.3 lb / 2.86 kg |
2x JL Audio M6-10IB-L-SbSb-4 10-inch (250 mm) Marine Subwoofer Driver, Black Trim Ring, Black Luxe Grille, 4 Ī© - (M6-10IB-L-SbSb-4)
JL Audio M6-10IB-L-GwGw-4 M6 Luxe 10-Inch Infinite Baffle Subwoofer, 250W, 4 Ohms
Engineered for Real Marine Duty
ā¢ To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are saltwater-rated products that you can use with confidence.Purpose-Built for the Finest Marine Vessels
ā¢ Low-profile mounting bezel with integrated tweeter bridge results in minimal intrusion into cabin space.ā¢ Flush-mount, fine mesh grille for a discreet visual appearance.
World-Class Sound Quality in Three Sizes
ā¢ Acoustically engineered to produce powerful, smooth sound in real-world, open-air, marine environments, and available in three speaker sizes: 6.5, 7.7 and 8.8 inches.ā¢ Long-excursion, DMA-optimized woofers and specific silk dome tweeters for each coaxial size produce superior output capability with impressive bass response and sparkling high frequency detail.
ā¢ Designed to operate with quality amplification, such as the JL Audio marine amplifiers.
Reference Marine Subwoofer Performance
ā¢ Subwoofer models include a long excursion woofer design, with highly optimized motor and suspension systems for outstanding sound and output.ā¢ Able to generate smooth, powerful bass, while blending in with the finest vessel designs.
ā¢ Intended for infinite-baffle applications (no enclosure needed).
Specifications -
ā¢ Mounting Application: Infinite Baffleā¢ Continuous Power Handling (RMS Method)*: 250 Watts
ā¢ Recommended Amplifier Power: 75 - 250 Watts
ā¢ Frequency Response: N/A
ā¢ Efficiency @ 1W/1m: 86.1 dB
ā¢ One-Way, Linear Excursion (Xmax): 0.52 in / 13.2 mm
ā¢ Nominal Impedance: 4 ohms
ā¢ Recommended Sealed Enclosure: 2.00 cu ft / 56.6 liters
ā¢ Recommended Ported Enclosure: 2.50 cu ft / 70.8 liters
Features -
ā¢ Minimal protrusion into cabin spaceā¢ Low-profile mounting bezel with integrated bridge for the treated, silk-dome tweeter
ā¢ Flush mount, fine mesh grille with marine-grade finish
ā¢ JL Audio M6 Marine Speaker Core
ā¢ Top-flight audio performance and durability in luxury marine installations.
ā¢ Low-profile, fine mesh grille for a discreet visual presentation.
ā¢ Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
ā¢ To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are true saltwater-rated products.