Description
Included in this kit
This bundle includes a JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W, a JL Audio CS110TG-TW3:Single 10TW3 Truck PowerWedge Sealed 2 Ohm, a JL Audio HD-RLC:Amplifier Remote Level Control and Cable, and a JL Audio XD-ACS60:Amplifier Connection Kit 60 A capacity Single Amplifier.
1x JL Audio XDM600/1 XDM Series Monoblock Class-D Car/Marine Subwoofer Amplifier, 600 W - (XDM600/1)
JL Audio XDM600/1 Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V
This potent monoblock amplifier employs JL Audio's high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).
Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
Specifications
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ω | 400 W RMS x 1 |
| @ 3 Ω | 500 W RMS x 1 |
| @ 2 Ω | 600 W RMS x 1 |
| @ 1.5 Ω | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ω | 300 W RMS x 1 |
| @ 3 Ω | 400 W RMS x 1 |
| @ 2 Ω | 500 W RMS x 1 |
| @ 1.5 Ω | N/A |
General Specifications
| Frequency Response | 7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >1000 / 50 Hz |
| Damping Factor @ 2 Ω | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | 200 mV - 4 V RMS |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 30 Hz, defeatable |
| Bass Boost EQ | No |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specifications
| Height (H) | 2.05 in / 52 mm |
| Width (W) | 8.52 in / 216 mm |
| Depth (D) | 7.09 in / 180 mm |
| Net Weight | 6.3 lb / 2.86 kg |
1x JL Audio CS110TG-TW3:Single 10TW3 Truck PowerWedge Sealed 2 Ohm - (CS110TG-TW3)
JL Audio CS110TG-TW3
Enclosed Subwoofer System with Single 10TW3-D4 Subwoofer Driver, Black Carpet (400 W, 2 Ω) - Sealed Enclosure
In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
General Specifications
| Continuous Power Handling (RMS) | 400 W |
| System Nominal Impedance | 2 Ω |
| Enclosure Type | Sealed truck enclosure |
| Finish | Black carpet |
| Grille Included | Black Steel Mesh |
Physical Specifications
| External Width (W) | 19 in / 483 mm |
| External Height (H) | 12.375 in / 314 mm |
| External Depth (D1) | 6.25 in / 159 mm |
| External Top Surface Depth (D2) | 4.1 in / 104 mm |
| Net Weight | 21.2 lb / 9.6 kg |
1x JL Audio HD-RLC:Amplifier Remote Level Control and Cable - (HD-RLC)
JL Audio HD-RLC: Amplifier Remote Level Control and Cable
Remote Level Control for Select JL Audio Amplifiers
The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers:
HD-Series: All models
XD-Series: All models
MHD-Series: All models
M-Series: All models
When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.
A satin-finish aluminum knob can be purchased separately.
1x JL Audio XD-ACS60:Amplifier Connection Kit 60 A capacity Single Amplifier - (XD-ACS60)
JL Audio XD-ACS60: Amplifier Connection Kit 60 A capacity Single Amplifier
Core 12V - 60A Connection System for One Amplifier
Everything you need to make secure, high-integrity connections to a single amplifier with up to a 60A fuse rating. Our compact Maxi® Master Fuse Block is easy to install and allows you to accurately fuse your amplifier. A beefy self-tapping ground screw is also included to help you achieve a solid ground. To complete your installation, you will also find an 18 ft. (5.5 m), 2-Channel Audio Interconnect Cable and a generous length of speaker cable in this system.
What's in the kit?
XD-MFB-MAXI Fuse Holder with Genuine 60A Maxi® Fuse
17 ft (5.18 m) Red 60A Core Power Wire, terminated with ring
3 ft (0.91 m) Black 60A Core Ground Wire, terminated with ring
17 ft (5.18 m) Blue Remote Turn-On Lead Wire
25 ft (7.62 m) Blue Speaker Cable
XD-CLRAIC2-18 2-channel, 18 ft. (5.5 m) Audio Interconnect Cable
Self-Tapping Ground Screw
Rubber Firewall Grommet
Nylon Wire Ties
Hex Wrench for Fuse Holder
This kit is appropriate for single amplifiers with fuse ratings from 30A to 60A. Depending on the specific fuse rating of your amplifier, you may need to purchase an appropriate Maxi® fuse separately.