Description
Included in this kit
This bundle includes a JL Audio MX300/1 300 watt mono block, Marine/Power Sports grade amplifier, a JL Audio XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery, a JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect, a JL Audio Marine Remote Bass Controller for MHX and HX amplifiers, and a JL Audio M3-10IB-S-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Sport Grille.
1x JL Audio MX300/1 300 watt mono block, Marine/Power Sports grade amplifier - (MX300/1)
JL Audio MX300/1
Engineered specifically for powersports applications, the MX300/1 monoblock amplifier employs our high-speed NexDā¢ switching design to pack a serious audio punch, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATVās or other utility vehicles.
With a robust 300W of clean power into a 2-ohm load (14.4V, 1% THD), use one to drive a subwoofer, or grab a pair to deliver stunning output to a subwoofer system. The MX300/1 also features an adjustable low-pass crossover, a bass boost EQ, variable infrasonic filter and output polarity switch.
Its dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. With the addition of an M-RBC-1 remote level control (sold separately), subwoofer output can be directly controlled from the driverās seat.
Rated Continuous (RMS) Power @ 14.4 V
| @ 4 Ī© | 160 W RMS x 1 |
| @ 3 Ī© | 220 W RMS x 1 |
| @ 2 Ī© | 300 W RMS x 1 |
| @ 1.5 Ī© | N/A |
Rated Continuous (RMS) Power @ 12.5 V
| @ 4 Ī© | 160 W RMS x 1 |
| @ 3 Ī© | 200 W RMS x 1 |
| @ 2 Ī© | 250 W RMS x 1 |
| @ 1.5 Ī© | N/A |
General Specifications
| Frequency Response | 20 Hz - 12 kHz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >85 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >64 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ī© | >150 / 50 Hz |
| Damping Factor @ 2 Ī© | >75 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ī© |
| Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 8 AWG wire |
| Fuse Rating | 30 A (AFS, AGU or MaxiFuseā¢) |
Signal Processing
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 24 dB/octave |
| Filter Frequency Range | 40 Hz - 400 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | Yes |
| Filter Defeat Function | Yes |
| Infrasonic Filter | 20 Hz - 40 Hz, variable |
| Bass Boost EQ | 0 to +12 dB @ 43 Hz |
| Output Polarity Switch | Yes |
| Remote Subwoofer Level Control | Optional (M-RBC-1) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | None |
Physical Specifications
| Height (H) | 1.77 in / 45 mm |
| Width (W) | 8.66 in / 220 mm |
| Depth (D) | 3.09 in / 78.5 mm |
| Net Weight | 3.18 lb / 1.44 kg |
1x JL Audio XMD-PCS30A-1-L12 Premium 9 AWG 12V Power Marine Connection Kit, Single Amplifier, Within 12 ft of Battery - (XMD-PCS30A-1-L12)
Premium 9 AWG 12-Volt Power Connection System for Single Amplifier - 30A Maximum
Ideal for most Center Consoles, Pontoons, Runabouts and Towboats where amplifier location is 12 feet (3.7 m) from battery, or closer
This kit contains everything you need to make secure, high-integrity power connections using ABYC-Standard colored wires. Ensure the safety of your audio system and vessel with the included Marine Circuit Breaker. As with all our Premium kits, the power wire is true AWG-spec, pure OFC copper, which is tinned to combat corrosion.
Included in this System:
ā¢ Red 9 AWG Tinned Power Wire (with one Power Ring) - 2 ft (0.6 m)
ā¢ Red 9 AWG Tinned Power Wire (unterminated) - 10 ft (3 m)
ā¢ Yellow 9 AWG Tinned Ground Wire (with one Power Ring) - 12 ft (3.7 m)
ā¢ Blue 16 AWG Remote Turn-On Wire - 18 ft (5.5 m)
ā¢ 30 Amp MAXIĀ® Fuse and Fuse Holder - XD-MFBW-MAXI
ā¢ Four 4-inch wire tires
ā¢ 4mm hex wrench
1x JL Audio XMD-WHTAIC2-12:2-Channel 12 ft (3.66 m) Marine Audio Interconnect - (XMD-WHTAIC2-12)
JL Audio XMD-WHTAIC2-12:Ā 2-Channel 12 ft (3.66 m) Marine Audio Interconnect
2-channel Marine Audio Interconnect Cable - 12 ft. (3.66 m)
Twisted-Pair Construction to Reject Noise
Pure OFC Copper Conductors with Polyethylene Dielectrics
Molded Connector Bodies
Machined Brass Connector Elements
1x JL Audio Marine Remote Bass Controller for MHX and HX amplifiers - (M-RBC-1)
Water-Resistant Remote Level Control for HX and MHX Monoblock Amplifiers or any JL Audio Monoblock with a āRemote Bass Controlā port.
The M-RBC-1 controls the Bass Level and features a water resistant connection cover designed for use with the following JL Audio amplifiers:
HX-Series: HX300/1 (in Low Pass Mode)
MHX-Series: MHX300/1 (in Low Pass Mode)
The M-RBC-1 controls the Bass Level of the following JL Audio amplifiers:
JX-Series: JX250/1, JX500/1, JX500/1D, JX1000/1D (RBC-1 also available)
When the M-RBC-1 is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle.
The M-RBC-1 remotely controls the Bass EQ boost feature of the following JL Audio amplifiers:
Slash v3 Series: 600/1v3, 1200/1v3
Slash v2 Series: 250/1v2, 500/1v2, 1000/1v2, 450/4v2
Original Slash Series: 500/1, 1000/1, 450/4, 500/5
G-Series: All Models
A-Series: All Models
e-Series: All Models (including marine versions)
M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
When the M-RBC-1 is connected to the above amplifiers, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the active controller.
The M-RBC-1 rotary control is IPX6 water-resistant (splash-proof, not submersible) and includes a black ABS knob, mounting hardware and one 16.4 ft (5 m) cable.
1x JL Audio M3-10IB-S-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Sport Grille - (M3-10IB-S-Gw-4)
JL Audio M3-10IB-S-Gw-4 - M3 10" 4-Ohm Infinite Baffle Marine Subwoofer - Gloss White Sport Grille
10-inch infinite baffle subwoofer, 175W, 4 ohms
High-performance Subwoofers, specifically engineered for marine duty
Truly engineered for marine duty.
To ensure long-term performance, all models are designed and built to exceed industry standards for salt-fog and UV exposure. These are salt-water rated products that you can use with confidence.
Outstanding Sound Quality
All models are designed to operate in open-air boat environments, delivering powerful, smooth sound that is several steps beyond common marine speakers. These are not car speakers painted white, they are acoustically engineered for boat installations. Engineered to operate without a dedicated enclosure.
Versatile power requirements
Suitable for use with standard marine head-unit power. Designed to benefit from operation with quality amplification, such as the JL Audio marine amplifiers.
Three great looks to choose from!
Available in two grille styles: āClassicā or āSportā, both in Gloss White. Sport models are also available in a sleek, all Gunmetal finish.
Allows you to match the look of the speakers to the theme of the boat intrior and the customerās tastes.
Physical Specifications
| Nominal Diameter | 10.0 in / 250 mm |
| Overall Diameter (A) | 10.75 in / 273 mm |
| Mounting Hole Diameter (B) | 8.875 in / 225 mm |
| Bolt Hole Circle Diameter (C) | 9.706 in / 247 mm |
| Motor Outer Diameter (D) | 5.29 in / 134 mm |
| Mounting Depth (E) | 5.12 in / 130 mm |
| Driver Displacement | 0.04 cu ft / 1.13 L |
| Net Weight | 6.5 lb / 2.94 kg |
Subwoofer Parameters
| Continuous Power Handling (RMS) | 175 Watts |
| Nominal Impedance (Znom) | 4 Ohm |
| Free Air Resonance (Fs) | 41.84 Hz |
| Electrical āQā (Qes) | 0.806 |
| Mechanical āQā (Qms) | 11.751 |
| Total Speaker āQā (Qts) | 0.754 |
| Equivalent Compliance (Vas) | 1.29 cu ft / 36.53 L |
| One-Way Linear Excursion (Xmax)* | 0.42 in / 11 mm |
| Efficiency (1 W / 1 m)** | 87.23 dB SPL |
| Effective Piston Area (Sd) | 50.68 sq in / 0.0327 sq m |
| DC Resistance (Re) | 3.957 Ī© |