Kenwood DAX1050XR Direct Replacement Solution- 10.1" High resolution floating mount screen and modular box/brain with Install Kit, Adaptors, & Harnesses compatible with 20-23 Gladiator

Included in this kit

---

This bundle includes a Kenwood DAX1050XR Direct Replacement Solution- 10.1" High resolution floating mount screen and modular box/brain , Wireless Car Play Ready, Wireless Android Auto Ready, Wireless Android Mirroring, HDMI Input, Bluetooth, an Idatalink Maestro ADS-MRR2 Maestro RR - Universal Radio Replacement and Steering Wheel Interface, an iDatalink ACC-HU-KEN1 Head Unit Adapter 22 Pin Harness For Kenwood Radios, and an iDatalink APX-FL-JL1 APX Floating radio installation kit for Jeep Wrangler/Gladiator.

1x Kenwood DAX1050XR Direct Replacement Solution- 10.1" High resolution floating mount screen and modular box/brain , Wireless Car Play Ready, Wireless Android Auto Ready, Wireless Android Mirroring, HDMI Input, Bluetooth - (DAX1050XR)

General
Operating voltage: 12V DC Car Battery
Set Weight: 2.1Kg/ 4.5lb
Chassis Dimensions WxHxD: 178mm x 50mm x 105mm/ 7 x 2 x 4-1/8 inch
Weight: 0.8kg/ 1.8lb
Monitor Dimensions WxHxD: 262mm x 181mm x 52mm/ 10-5/16 x 7-1/8 x 2-1/16 inch
Weight: 1.1Kg/ 2.4lb

Monitor Section
Picture size: 10.1 inches(diagonal) wide
W x H: 223.7 x 125.8 (mm), 8-13/16 x 4-15/16 (inch)
Display system: LCD panel
Drive system: TFT active matrix system
Number of pixels: 2,764,800, 1280H x 720V x RGB
Effective pixels: 99.99%
Pixel arrangement: RGB striped arrangement

USB I/F Section
Connector Type: Type-C
USB Standard: USB2.0 High Speed
File System: FAT 16/32, exFAT, NTFS
Maximum Power Supply Current: DC5V=3.0A
Audio Decoder: MP3 / WMA / AAC / WAV / FLAC / Vorbis
Video Decoder: MPEG1/2,MPEG4 / WMV / H.264 / MKV

Bluetooth Section
Technology: Bluetooth Ver5.2
Frequency: 2.402 – 2.480 GHz
Maximum Communication range: Line of sight approx. 10m (32.8ft)
Audio Codec: SBC / AAC / LDAC

Digital FM
Frequency Range: 87.9MHz - 107.9MHz (Frequency step)(200kHz)
Frequency Response: 20Hz - 20kHz (±3.0 dB)
S/N: 80dB (STEREO)

Digital AM
Frequency Range: 530kHz - 1700kHz (Frequency step)(10kHz)
Frequency Response: 40Hz - 15kHz (±3.0 dB)
S/N: 80dB (STEREO)

FM
Frequency Range: 87.9MHz - 107.9MHz (Frequency step)(200kHz)
Usable sensitivity: 7.3dBf
S/N 30dB: 0.7μV/75Ω
Frequency response (±3.0dB): 30Hz - 15kHz
S/N(dB): 70dB (MONO)
Selectivity: Over 80dB (±400kHz)
Stereo separation: 45dB (1kHz)

AM
Frequency Range: 530kHz - 1700kHz (Frequency step) (10kHz)
Usable sensitivity: 30dBμ

Video
Color system of external video input: NTSC/PAL
External video input level (RCA jacks): 1 Vp-p / 75 Ohms
Video Input level (RCA jacks): 1 Vp-p / 75 Ohms

Audio
Maximum Power Output (Front&Rear): 50Wx4
Typical Power Output (Front&Rear): 29W x 4 (4Ω,1kHz,10%THD)
Output frequency band: 20 - 88,000Hz
Preout level (V): 5V / 10kOhms
Preout impedance (Ω): =< 300 Ohms
Speaker Impedance (Ω): 4-8 Ohms

1x Idatalink Maestro ADS-MRR2 Maestro RR - Universal Radio Replacement and Steering Wheel Interface - (ADS-MRR2)

Advanced radio replacement interface compatible with over 3000 vehicles 2003 and up. Maestro RR2 offers the same exclusive infotainment retention and exclusive screens as the Maestro RR while adding support for additional vehicles and enabling Bluetooth programming directly from your iOS and Android mobile device. Basic radio retention features are also available with non-iDatalink-compatible radios. Some accessories and aftermarket radio are required and sold separately.

1x iDatalink ACC-HU-KEN1 Head Unit Adapter 22 Pin Harness For Kenwood Radios - (ACC-HU-KEN1)

Head unit adapter that allows a plug n play connection between select Kenwood and JVC radios and a compatible Maestro T Harnesses.

1x iDatalink APX-FL-JL1 APX Floating radio installation kit for Jeep Wrangler/Gladiator - (APX-FL-JL1)

APX Floating radio installation kit for Jeep Wrangler/Gladiator.

Vehicle Coverage
Works with 10.1" screen; Gladiator 2020-2023, Wrangler 2018-2023