Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS - w/ CXA400.1 Amp Bundle

Included in this kit

---

This bundle includes 1x Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS, and 1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp.

1x Kicker 45VL7R102 Single 10" L7R Loaded Vented Enclosure - 500 Watts RMS - (45VL7R102)

Kicker 45VL7R102 Single 10" L7R Enclosure

The L7R 10-inch Subwoofer Enclosure is the perfect fit in your trunk and in your life.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone system. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Combined with an optimized front-facing port, reinforced MDF construction, rounded corners and thick black carpet, you get big bass without the expense of a custom enclosure.

Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction

Specifications
Type - Single
Woofers/size [in, cm] - Solo-Baric L7R 10" 2Ω
Impedance [Ohms] - 2
Power Watts [RMS] - 500
SENSITIVITY [dB 1w/1m] - 88
Box Top Depth (in, cm): - 8-1/4, 21
Box Bottom Depth (in, cm): - 13-7/8, 35.1
Box Height (in, cm): - 13, 33
Box Width (in, cm): - 24, 61

What's in the box?
one loaded enclosure with one 10-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers

1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001T)

Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier

Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look

Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz