Kicker 45VL7R122 Single 12" L7R Loaded Vented Enclosure - 600 Watts RMS - w/ CXA800.1 Amp Bundle

Included in this kit

---

This bundle includes 1x Kicker 45VL7R122 Single 12" L7R Loaded Vented Enclosure - 600 Watts RMS, and 1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp.

1x Kicker 45VL7R122 Single 12" L7R Loaded Vented Enclosure - 600 Watts RMS - (45VL7R122)

Kicker 45VL7R122 Single 12" L7R Loaded Ported Enclosure

With a custom angled back, the L7R 12-Inch Subwoofer Enclosure is perfect for deep, pounding bass in your trunk or behind your SUV seats.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone technology – joining the cone to the vented back brace. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Our engineers used reinforced MDF construction, rounded corners and thick black carpet to get big bass without the expense of a custom enclosure.

Features:
Genuine L7R Subwoofer Included
Front-Facing Port Design for loudest possible bass
Angled Back for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction

Specifications
Type - Single
Woofers/size [in, cm] - Solo-Baric L7R 12" 2Ω
Impedance [Ohms] - 2
Power Watts [RMS] - 600
SENSITIVITY [dB 1w/1m] - 94
Box Top Depth (in, cm): - 8-1/2, 21.7
Box Bottom Depth (in, cm): - 14-7/8, 37.8
Box Height (in, cm): - 15, 38.1
Box Width (in, cm): - 28, 71.1

What's in the box?
one loaded enclosure with one 12-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers

1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp - (46CXA8001)

Kicker 46CXA8001 CX800.1 800 Watt RMS 1-Ohm Stable Mono Amplifier

Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 800 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look

Specifications:
• MODEL - CXA800.1
• Power (watts/ch) 4 Ohm - 300x1
• Power (watts/ch) 2 Ohm - 600x1
• Power (watts/ch) 1 Ohm - 800x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz