Description
Included in this kit
This bundle includes 1x Kicker 45TL7R102 Single 10" L7R Truck Loaded Vented Enclosure - 500 Watts RMS, and 1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp.
1x Kicker 45TL7R102 Single 10" L7R Truck Loaded Vented Enclosure - 500 Watts RMS - (45TL7R102)
Kicker 45TL7R102 Single 10" L7R Truck Enclosure
The L7R 10-inch Subwoofer Enclosure is perfect for big bass under or behind your truck seats.
KICKER’s square sub technology features patented ribbed corners, UniPlate™ solid pole piece and backplate, and injection-molded SoloKon™ cone technology – joining the cone to the vented back brace. You get up to 20% more volume compared to a round driver, so you move more air and get more bass! Our engineers used reinforced MDF construction, rounded corners and thick black carpet to get big bass without the expense of a custom enclosure.
Features:
Genuine L7R Subwoofer Included
Custom Engineered Port Design for loudest possible bass
Angled Front for Excellent Fit
Heavy Internal Bracing makes is last for years
Single 2-Ohm Terminal for quick installation
Easy to Install and Wire
Thick Black Carpeting to handle bumps and scrapes
Aesthetically pleasing Rounded Corners
Embroidered KICKER Logo
Thick MDF Construction
Specifications
Type - Single Truck
Woofers/size [in, cm] - Solo-Baric L7R 10" 2Ω
Impedance [Ohms] - 2
Power Watts [RMS] - 500
SENSITIVITY [dB 1w/1m] - 88
Box Top Depth (in, cm): - 6-1/2, 16.4
Box Bottom Depth (in, cm): - 10, 25.4
Box Height (in, cm): - 15, 38.1
Box Width (in, cm): - 21-1/2, 54.6
What's in the box?
one loaded enclosure with one 10-inch subwoofers
mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
one owner's manual
two stickers
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001T)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA400.1
• Power (watts/ch) 4 Ohm - 150x1
• Power (watts/ch) 2 Ohm - 300x1
• Power (watts/ch) 1 Ohm - 400x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
