Description
Included in this kit
This bundle includes 1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability, and 1x Kicker 50VCWC122 CompC 12-inch Subwoofer in Vented Enclosure, 2-Ohm.
1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability - (47KEY5001)
Kicker 47KEY5001 KEY 1-Channel DSP Smart Amplifier, 1x500W
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using KICKER’s supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.
Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.
The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
Specifications -
• Power (watts/ch), 1 Ohm stereo: 500
• Power (watts/ch), 2 Ohm stereo: 300
• Power (watts/ch), 4 Ohm stereo: 150
• Microphone/Kicker EQ button: included
• Standard dimensions(H x W x L)(in, cm) 1-11/16, 4.3 x 2-3/4, 7 x 7-3/8, 18.7
• Frequency Response (Hz): 10-160
• Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
• What's in the Box: 1 - fuse holder, 1 - manual and installation hardware
1x Kicker 50VCWC122 CompC 12-inch Subwoofer in Vented Enclosure, 2-Ohm - (50VCWC122)
12" 2-Ohm CompC Loaded Subwoofer Enclosure
Signature Stitches - Kicker's signature yellow stitching creates a superior bond between the tough, ribbed polyurethane surround and polypropylene cone for the best in reliability.
Poly Perfection - CompC subwoofers have a lightweight, injection-molded polypropylene cone to eliminate flex and distortion. You get a deep, accurate sound no matter how hard you push it.
Stay Cool - Perimeter venting slots allow air to constantly circulate around the motor to maintain the perfect operating temperature.
Your setup. Your way. - Single and dual-voice-coil four-ohm options let you get the most out of your amp.
Make It Bump - This KICKER sub delivers serious bass! Use a CX amplifier for the perfect marriage of power and performance.
Forced Air Cooling -
As the woofer's cone moves downward, hot air around the voice coil is forced out of the woofer. As the woofer's cone moves upward, cool outside air is drawn into the woofer cooling the voice coil.
The CompC 12-Inch Subwoofer Enclosure comes loaded with a single 2-Ohm terminal.
Features:
• Uses Very Little Trunk Space
• Genuine CompC Subwoofer
• Custom Port Design
• Made Of Heavy MDF
• Spring Loaded Speaker Terminal
• Thick Black Carpet Protects the Enclosure
• Embroidered KICKER Logo
• Works Perfectly with CXA400.1 (Sold separately)
Specifications:
• Subwoofer (in, cm) - 12, 30
• Impedance (Ohms) - 2
• Recommended Amplifier Power (watts RMS) - 300
• Peak Power (watts, per ANSI/CTA-2031-A) - 600
• Sensitivity (dB 1w/1m) - 95.3
• Tuning Frequency [Hz] - 30
• Box Top Depth (in, cm) - 11-3/8, 28.9
• Box Bottom Depth (in, cm) - 14-1/2, 36.7
• Box Height (in, cm) - 16, 40.6
• Box Width (in, cm) - 20, 50.8
