Description
Included in this kit
This bundle includes 1x Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects, 1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps, 1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp, and 1x Kicker 48DCVR122 CompVR 12" dual subwoofers in vented box, 2-ohm.
1x Kicker 46CK4 K-Series Complete 4-AWG Amplifier Connection Kit W/ 2-Channel RCA Interconnects - (46CK4)
KICKER® complete amp kits feature top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
4AWG 2-Channel Amp Kit
This Complete Four Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. The best hardware, signal and power cable comes in one convenient package.
1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps - (46CXARCt)
Kicker 46CXARC Remote / Bass Knob
CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
CXARC Remote
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.
1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp - (46CXA8001)
Kicker 46CXA8001 CX800.1 800 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 800 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA800.1
• Power (watts/ch) 4 Ohm - 300x1
• Power (watts/ch) 2 Ohm - 600x1
• Power (watts/ch) 1 Ohm - 800x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
1x Kicker 48DCVR122 CompVR 12" dual subwoofers in vented box, 2-ohm - (48DCVR122)
Kicker 48DCVR122 12" Dual CompVR Subwoofers in Vented Enclosure, 2-Ohm, 800w RMS
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake. KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts. A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.
This enclosure features tough MDF construction with head-duty internal bracing to make sure the only thing vibrating are your ears. The thick embroidered black carpet makes a statement of quality craftsmanship and sound, with front venting to further increase the output of these subwoofers. The pre-wired 2-Ohm terminals on the back make installation a breeze.
Key Features -
• SoloKon Cone System with Vented Back Bracing and Motor Cooling
• Red Stitched Surround for Unsurpassed Reliability
• Legendary KICKER Bass
• Front Venting for Smooth, Powerful Bass
• Extensive Internal Bracing and Thick MDF Construction
• Pre-Wired, Spring-Loaded, Two-Ohm Terminals
• Features the Best-in-Class CompVR Subwoofer
• Factory-Tuned Enclosure for Incredible Bass
• Great for SUVs, Hatchbacks and Car Trunks
VCWR12 Specifications -
• Woofer [in, cm] - (2) 12, 30
• Impedance [Ohms] - 2
• Recommended Amp Power [watts RMS] - 800
• Peak Power Handling [watts] - 1600
• Sensitivity [dB 1w/1m] - 98
• Enclosure Depth [in, cm] - 17-1/4, 43.8
• Enclosure Height [in, cm] - 16, 40.6
• Enclosure Width [in, cm] - 32-3/8, 82.2
