Kicker KMC2 Gauge Mount Marine Grade Receiver & ( 2 Pairs ) 45KM654 6.5" Marine Speakers bundle

Included in this kit

---

This bundle includes a Kicker 46KMC2 Weather-Resistant Gauge-Style Media Center With Bluetooth, and 2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch (20mm) Tweeters, 4-Ohm, Charcoal and White Grilles.

1x Kicker 46KMC2 Weather-Resistant Gauge-Style Media Center With Bluetooth - (46KMC2)

Kicker 46KMC2 Weather-Resistant Gauge-Style Media Center With Bluetooth
The Party Starts Here - Equipped with an easily readable screen, rotary encoder and over 200 watts of total peak power into four channels, the KMC2 comes equipped with plenty of power. Add even more bump to your boat by adding amplifiers to the included RCA outputs.

Connect your Bluetooth to the KMC2, plug into the included USB or RCA inputs, or turn on the AM/FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!

• Fits in gauge opening
• IPX66 certification
• Uses USB, RCA, AM/FM and Bluetooth audio sources
• USB audio playback or charging
• RCA outputs
• Compatible with KRC12 Remote Commander

Specifications • Power Output @ 14.4V, 4Ω stereo, Less 10% THD+N: 25x4
• Frequency Response [Hz]: 20-20k
• Signal-to-Noise Ratio [dB]: 87
• RCA Outputs: 1 Set of Pre-amp Outputs
• Line-Out Level [V]: 2.5
• Outer Trim Ring Dimensions [in, cm]: 4.4, 11.2
• Protrusion From Mounting Surface [in, cm]: 1.25, 3.1
• Mounting Depth [in, cm]: 3.9, 10
• Mounting Hole Diameter [in, cm]: 3, 7.62
• Mounting Panel Thickness Range [in, cm]: Any
• IP Rating: IP66
• AUX Input Sensitivity: 500 mV
• USB: Playback, Charging
• Compatible File System: FAT32
• Compatible File Types: MP2, MP3, WMA, WAV16, FLAC16
• USB Power Supply: DC 5V, 1 Amp
• BT Range (feet): 30

2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch (20mm) Tweeters, 4-Ohm, Charcoal and White Grilles - (45KM654-KL)

They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!

UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.

Four-Ohm Voice Coil
3/4-Inch Titanium Tweeter
UV-Treated Polypropylene Woofer With Santoprene® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
Charcoal and White Grilles Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure

Specifications
Woofer(in,mm)
6-1/2, 165
Tweeter(in,mm)
3/4, 20
Tweeter Dome Material
Titanium
Rated Impedance(Ω)
4
Peak Power Handling(Watts)
195
Continuous Power Handling(Watts RMS)
65
Sensitivity(1W,1m)
90
Frequency Response(Hz)
35-21k
Mounting Hole Diameter(in,mm)
5-1/8, 130
Mounting Depth(in,mm)
2-7/8, 72
Grilles
Charcoal and White

What's in the Box:
2 - 6.5" 4Ω Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 Zip Ties
Due to continual development, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.