Description
Included in this kit
This bundle includes a Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp, and 2x Kicker 50CVX104 10" CompVX 4-Ohm Subwoofer.
1x Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp - (46CXA12001)
Kicker 46CXA12001 CX1200.1 1200 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA1200.1
• Power (watts/ch) 4 Ohm - 600x1
• Power (watts/ch) 2 Ohm - 1200x1
• Power (watts/ch) 1 Ohm - 1200x1 +/-10%
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 12, 30.6
• Frequency Response (Hz): - 25-200Hz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 95dB
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
2x Kicker 50CVX104 10" CompVX 4-Ohm Subwoofer - (50CVX104)
The CompVX's basket is cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire.
Inside the sub, the poly-cotton, semi-progressive-roll spider supplies substantial stability for the loudest bass possible. Externally, a ribbed Santoprene® surround protects the cone during max excursion.
Features:
Dual Four-Ohm Voice Coils
Thick Polypropylene Cone
Signature Double Blue Surround Stitching
Ribbed Santoprene® Surround
SoloKon™ Cone Reinforcement
Oversized Suspension System
High-Strength Insulated Tinsel Leads
High Temp Voice Coil
Perimeter Venting for Thermal Management
Massive Ceramic Magnet
UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
Cast Aluminum Basket
Satin Nickel Spring-Loaded Speaker Terminals
Specifications
Size (IN.,CM): 10, 25
Impedance (OHMS): 4 DVC
Recommended Amplifier Power (watts RMS): 600
Peak Power (watts, per ANSI/CTA-2031-A): 1200
Sensitivity (dB 1w/1m): 85.7
Frequency Response (Hz): 24-500
Mounting Depth (in, cm): 5-15/16, 15.1
Mounting Cutout (in, cm): 9-3/16, 23.3
Min Sealed Box Vol (cu. ft, L): .8, 22.7
Max Sealed Box Vol (cu. ft, L): 3.0, 85.0
Min Vented Box Vol (cu. ft, L): 1.25, 35.4
Max Vented Box Vol (cu. ft, L): 1.75, 49.6
What's in the box?: One 10-inch subwoofer, one owner's manual, two stickers
