Description
Included in this kit
This bundle includes a Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp, 2x Kicker 50CVX104 10" CompVX 4-Ohm Subwoofer, and a Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps.
1x Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp - (46CXA12001)
Kicker 46CXA12001 CX1200.1 1200 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA1200.1
• Power (watts/ch) 4 Ohm - 600x1
• Power (watts/ch) 2 Ohm - 1200x1
• Power (watts/ch) 1 Ohm - 1200x1 +/-10%
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 12, 30.6
• Frequency Response (Hz): - 25-200Hz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 95dB
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
2x Kicker 50CVX104 10" CompVX 4-Ohm Subwoofer - (50CVX104)
The CompVX's basket is cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire.
Inside the sub, the poly-cotton, semi-progressive-roll spider supplies substantial stability for the loudest bass possible. Externally, a ribbed Santoprene® surround protects the cone during max excursion.
Features:
Dual Four-Ohm Voice Coils
Thick Polypropylene Cone
Signature Double Blue Surround Stitching
Ribbed Santoprene® Surround
SoloKon™ Cone Reinforcement
Oversized Suspension System
High-Strength Insulated Tinsel Leads
High Temp Voice Coil
Perimeter Venting for Thermal Management
Massive Ceramic Magnet
UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
Cast Aluminum Basket
Satin Nickel Spring-Loaded Speaker Terminals
Specifications
Size (IN.,CM): 10, 25
Impedance (OHMS): 4 DVC
Recommended Amplifier Power (watts RMS): 600
Peak Power (watts, per ANSI/CTA-2031-A): 1200
Sensitivity (dB 1w/1m): 85.7
Frequency Response (Hz): 24-500
Mounting Depth (in, cm): 5-15/16, 15.1
Mounting Cutout (in, cm): 9-3/16, 23.3
Min Sealed Box Vol (cu. ft, L): .8, 22.7
Max Sealed Box Vol (cu. ft, L): 3.0, 85.0
Min Vented Box Vol (cu. ft, L): 1.25, 35.4
Max Vented Box Vol (cu. ft, L): 1.75, 49.6
What's in the box?: One 10-inch subwoofer, one owner's manual, two stickers
1x Kicker 46CXARC CXARC Remote Control for Kicker 46CX Series Amps - (46CXARCt)
Kicker 46CXARC Remote / Bass Knob
CX-Series mono amps offer an optional remote level control to adjust your bass right from the dash. Dial it up the way you want to hear it.
CXARC Remote
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with any CX, DX or PX KICKER amplifier equipped with a REMOTE BASS jack on its end.
