Description
Included in this kit
This bundle includes a Kicker CVX152 COMPVX 15" Subwoofer Dual Voice Coil 2-Ohm 1000W, and a Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp.
1x Kicker CVX152 COMPVX 15" Subwoofer Dual Voice Coil 2-Ohm 1000W - (44CVX152)
15" CompVX 2 Ohm
High-temp dual voice coils deliver the power, while a solid pole piece provides more mass to subdue additional heat. A T-cut top plate creates a wider magnetic field for stronger bass response, and better sound. It all comes together to form a super-reliable motor structure found only in a KICKER subwoofer.
Features:
Dual Two-Ohm Voice Coils
Thick Polypropylene Cone
Signature Double Blue Surround Stitching
Ribbed Santoprene® Surround
SoloKon™ Cone Reinforcement
Oversized Suspension System
High-Strength Insulated Tinsel Leads
High Temp Voice Coil
Perimeter Venting for Thermal Management
Massive Ceramic Magnet
UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
Cast Aluminum Basket
Satin Nickel Spring-Loaded Speaker Terminals
*The CompVX 15-Inch Subwoofer works best with a sealed or ported enclosure and 1000 watts of recommended power. See below for more details.
Specifications
Size (IN.,CM)
15, 38
Impedance (OHMS)
2 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS)*
2000/1000
Sensitivity (dB 1w/1m)
91.6
Frequency Response (Hz)
18-500
Mounting Depth (in, cm)
8-1/2, 21.5
Mounting Cutout (in, cm)
13-13/16, 35
Min Sealed Box Vol (cu. ft, L)
1.8, 51.0
Max Sealed Box Vol (cu. ft, L)
5.2, 147.0
Min Vented Box Vol (cu. ft, L)
3.0, 85.0
Max Vented Box Vol (cu. ft, L)
5.0, 142.0
1x Kicker 46CXA12001 CXA12001 1200-watt Mono Class D Subwoofer Amp - (46CXA12001)
Kicker 46CXA12001 CX1200.1 1200 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
Specifications:
• MODEL - CXA1200.1
• Power (watts/ch) 4 Ohm - 600x1
• Power (watts/ch) 2 Ohm - 1200x1
• Power (watts/ch) 1 Ohm - 1200x1 +/-10%
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 12, 30.6
• Frequency Response (Hz): - 25-200Hz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 95dB
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz
