Description
Included in this kit
This bundle includes a Kicker 46CXA3604 CXA3604 - 4x90-Watt 4-Channel Full-Range Amp, and 2x Kicker 46CSC684 CS-Series CSC68 6x8-Inch (160x200mm) Coaxial Speakers, 4-Ohm (Pair).
1x Kicker 46CXA3604 CXA3604 - 4x90-Watt 4-Channel Full-Range Amp - (46CXA3604)
Kicker 46CXA3604 CX360.4 360 Watt RMS 2-Ohm Stable 4-Channel Amplifier
Using Class A/B power, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX-Series Amplifier delivers as much as 90 watts into four full-range channels, or 180 watts into two bridged channels. See below for more details.
Features:
• Class A/B full-range channels
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Vertical mounting hardware included for another unique look
• Compatible with CXARC Remote Bass Control
Specifications:
• MODEL - CXA360.4
• Power (watts/ch) 4 Ohm Stereo - 65x4
• Power (watts/ch) 2 Ohm Stereo - 90x4
• Power (watts/ch) 4 Ohm Mono - 180x2
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 12-1/2, 31.7
• Frequency Response (Hz): - 10Hz-20kHz
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - 95dB
• Active Crossover: - HI, LO or OFF; Variable 50–200Hz @ 12dB/Octave
• Subsonic Filter: - n/a
• KickEQ™ Boost - Variable 0-6dB @40Hz
2x Kicker 46CSC684 CS-Series CSC68 6x8-Inch (160x200mm) Coaxial Speakers, 4-Ohm (Pair) - (46CSC684)
Kicker 46CSC684 CS-Series 6x8-inch Coaxial Speakers are the perfect way to upgrade your factory system.
These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone and UV-treated foam surrounds that stand up to heat and direct sunlight, for years of outstanding audio quality.
These CS speakers work best with 75 watts of recommended power.
Fits nearly every car made
Zero-protrusion tweeters to fit nearly any factory depth
Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
UV-treated poly-foam surround resists heat or direct sunlight
Large woofer magnet in a heavy-duty motor for ultra-clean bass
PEI-tweeter construction provides superb clarity
Neodymium tweeter magnets allow for increased volume in high frequencies
Specifications -
• Speaker Design - 2 - way
• Woofer Size | in [mm] - 6x8 [160x200]
• Tweeter Size | in [mm] - 1/2 [13]
• DC Resistance | ohm - 3.5
• Peak Power | Watts - 225
• Continuous Power | Watts, RMS - 75
• Sensitivity [SPLo] | dB @ 1W, 1m - 90
• Effective Frequency Range | Hz - 45-20k
• Mounting Hole Diameter | in [mm] - 5 x 7 3/16 [126x182]
• Top Mount Depth | in [mm] - 3/8 [9]
• Bottom Mount Depth | in [mm] - 2 3/16 [56]
• Tweeter Protrusion | in [mm] - 0
• Grilles - No
• Tweeter Magnet Material - Neodymium
• Tweeter Dome Material - PEI [polyether imide
• Tweeter Design - Balanced dome
• Woofer Cone Material - Polypropylene
• Woofer Surround Material - Polyester foam
• The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC™ (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.
