Description
Included in this kit
This bundle includes a Kicker 48PXA6001 Weatherproof Powersport Amplifier - 600-Watt Mono Subwoofer Amplifier, a Kicker KMG10 10-Inch (25cm) Grille for KM10 and KMF10 Subwoofer, LED, Charcoal, and a Kicker KM10 10-inch (25cm) Weather-Proof Subwoofer for Enclosures, 2-Ohm.
1x Kicker 48PXA6001 Weatherproof Powersport Amplifier - 600-Watt Mono Subwoofer Amplifier - (48PXA6001)
PXA6001 - 600-Watt Mono Subwoofer Amplifier
These are IP67 certified, completely repelling any dust or water. So they’re great for UTVs, off-road vehicles, hot rods or really any vehicle on the road. The bass amps are one-Ohm stable, and the full-range amps produce more power at 4 Ohms than any previous KICKER Powersports amp. Expect incredible power and toughness.
Specifications:
Channels: Mono
Watts: 600
Ohms: 1
1x Kicker KMG10 10-Inch (25cm) Grille for KM10 and KMF10 Subwoofer, LED, Charcoal - (45KMG10C)
Perfect for KM or KMF 10-inch Subwoofer, these LED-equipped grilles are molded from thick ABS plastic.
Perfect for fresh and salt water, these waterproof grilles provide years of protection for your bass, while thick silicone-coated LEDs give your boat an added flair! Add the KMLC LED Controller (sold separately) for 20 total colors and 19 different lighting modes to make it even more fun!
Specifications
What's in the Box:
1 - 10" charcoal subwoofer grille
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
1x Kicker KM10 10-inch (25cm) Weather-Proof Subwoofer for Enclosures, 2-Ohm - (45KM102)
The KICKER® KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat.
Completely weather-resistant, these marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.
A completely sealed motor structure and locking/sealed terminal cover make it splash-proof for long life, while a tough Santoprene® surround and marine-grade polypropylene cone pump out the bass, no matter how long or loud the party lasts.
Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.
FEATURES
Two-Ohm Voice Coil
Injection-Molded Polypropylene Cone
Co-molded Santoprene® Surround
UniPlate™ Back Plate And Pole Piece
Thick Tinsel Leads
Large Ceramic Magnet
Rear Gasketing Included
Polymer Basket Resists Corrosion
Protective Terminal Cap
Stainless Mounting Hardware Included
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
10, 25
Impedance (OHMS)
2 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1-2.4, 28.3-68
Vented Enclosure Volume Min-Max(ft³, L)
1.25-1.75, 35.4-49.6
Frequency Response(Hz)
30-500
Mounting Depth(in, cm)
5, 12.7
Hole Diameter(in, cm)
9-3/16, 23.2
Outer Diameter(in, cm)
10-11/16, 27.1
What's in the Box:
1 - 10" Woofer
1 - Back gasket
8 - Mounting screws
8 - Mounting screw clips
1 - Manual
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.
