Description
Included in this kit
This bundle includes a Kicker 51MWLE104 - MWE 10-Inch Loaded Premium Marine Sub Encl w/ Passive Radiator 4ohm, a Kicker 48KMA6006 KMA600.6 6x100w 6-Ch Weather-Resistant Full-Range Amplifier, and 2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch Tweeters, LED, 4-Ohm, Charcoal and White Grilles.
1x Kicker 51MWLE104 - MWE 10-Inch Loaded Premium Marine Sub Encl w/ Passive Radiator 4ohm - (51MWLE104)
This marinized "dual" enclosure is ready to go out of the carton, utilizing a 10-inch MWE Premium Subwoofer and a custom-tuned, 10-inch passive radiator.
MW Subwoofers loaded in MWLEs utilize water-proof connections for flawless signal transfer, a stiff weather-resistant polypropylene woofer cone with a co-molded TPE surround, and ribbed silicone gasketing for a complete weather-proof seal
Install the MWLE Loaded Sub Enclosure for the best sound in your boat ā up-firing or front-firing subwoofers projecting the loudest bass possible, or even down-firing for the deepest bass that vibrates the deck.
The MWLE utilizes an extremely tough, molded all-weather enclosure with lockable mounting feet, and it includes a pair of charcoal, UV-resistant grilles. You can change them out for MWGW white grilles by contacting your KICKER dealer (sold separately).
Specifications
ā¢ Woofer (in, cm) - 10, 25
ā¢ ReFLEXā¢ Woofer (in, cm) - 10, 25
ā¢ Rated Impedance (Ohms) - 4
ā¢ Rec Amp Power (watts RMS) - 200-400
ā¢ Peak Power Handling (watts) - 800
ā¢ Freq Resp (Hz) - 20-500
ā¢ Enclosure Height (in, cm) - 12-5/8, 32
ā¢ Enclosure Width (in, cm) - 25-9/16, 64.9
ā¢ Enclosure Depth (in, cm) - 8-11/16, 22
ā¢ Grilles - Charcoal included (MWGW white grilles sold separately)
1x Kicker 48KMA6006 KMA600.6 6x100w 6-Ch Weather-Resistant Full-Range Amplifier - (48KMA6006)
Kicker KMA600.6 6x100w 6-Ch Weather-Resistant Full-Range Amplifier - 48KMA6006
Get KMA Marine Amplifier power on the water! These super-flexible marine amps are perfect for your boat and your wallet. Purpose-built for your boat, every KMA amp is pure KICKER Real Marine, complete with marine-grade speaker terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. The amplifiers are also equipped with KickEQ variable bass boost.
Features -
ā¢ 600.6 6-Channel Adds a Possible Three Full-Range Zones, or Two Full-Range and a Sub Section
ā¢ Conformal-Coated Circuit Boards to Repel Moisture
ā¢ 316L Stainless-Steel, No-Rust Hardware
ā¢ Small Footprint to Tuck Out of the Way
ā¢ Marine-Compliant Terminals
ā¢ 0-6dB Variable Bass Boost
ā¢ Built-In Variable Crossovers for Precise Speaker Performance Matching
ā¢ Adds Extra Intensity to a Large System
ā¢ Marine Environment Ready
ā¢ Superior Sound Quality and Added Power
Specifications -
ā¢ Power [watts/ch] 2 Ohm Stereo: 100x6
ā¢ Power [watts/ch] 4 Ohm Stereo: 50x6
ā¢ Power [watts/ch] 4 Ohm Bridged Mono: 200x3
ā¢ Dynamic Power [watts]: 750
ā¢ Frequency Response [Hz]: 10-20k
ā¢ Crossover: HP only, variable 0-200Hz (amp 1 and 2); OFF/HP/LP, variable 50-200Hz (amp 3), 12dB/octave
ā¢ KickEQ+ Bass Boost: All Models Variable 0-6dB @ 40Hz
ā¢ Dimensions [in, cm]: H ā 2-5/16, 5.9; W ā 6-11/16, 17; L - 13-15/16, 35.3
2x Kicker KM65 6.5-Inch (165mm) Marine Coaxial Speakers with 3/4-Inch Tweeters, LED, 4-Ohm, Charcoal and White Grilles - (45KM654L)
Loud and clear, the KM Coaxial Marine Speakers are built to pump out the tunes ā and the fun - for years to come! Whether you mount your speakers in the hull or in KICKERĀ® tower enclosures, you also get a pair of stout marine-grade grilles!
UV treatments on injection-molded cones, SantopreneĀ® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Four-Ohm Voice Coil
3/4-Inch Titanium Tweeter
UV-Treated Polypropylene Woofer With SantopreneĀ® Surround
UV-Resistant Polymer Basket
Locking/Sealed Terminal Cover
Sealed Motor Structure
316L Stainless Mounting Hardware Included
White and Charcoal Grilles With RGB LED lights - Color changing and patterns require a compatible RGB LED remote like the Kicker KMLC (Sold Separately)
Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
Specifications
Woofer(in,mm)
6-1/2, 165
Tweeter(in,mm)
3/4, 20
Tweeter Dome Material
Titanium
Rated Impedance(Ī©)
4
Peak Power Handling(Watts)
195
Continuous Power Handling(Watts RMS)
65
Sensitivity(1W,1m)
90
Frequency Response(Hz)
35-21k
Mounting Hole Diameter(in,mm)
5-1/8, 130
Mounting Depth(in,mm)
2-7/8, 72
LED Lighting
Yes
Grilles
Charcoal and White
What's in the Box:
2 - 6.5" 4Ī© Coaxials
8 - Mounting Screws
8 - Mounting Screw Clips
2 - Wire Connection Cover
2 Zip Ties
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it's agents are not responsible for typographical errors.