Kicker 10 Inch CVT Thin Woofer Includes Two 52CVT104 Package with 46CXA8001 Amplifier and wire kit

Included in this kit

---

This bundle includes a Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp, a Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects, and 2x Kicker 52CVT104 CVT10 CompVT 10-Inch (24cm) Subwoofer, 4 Ohm SVC.

1x Kicker 46CXA8001 CXA8001 - 800-Watt Mono Class D Subwoofer Amp - (46CXA8001)

Kicker 46CXA8001 CX800.1 800 Watt RMS 1-Ohm Stable Mono Amplifier

Using a Class-D power plant, the CXA800.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 800 watts into one bass channel. See below for more details.
Features:
• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look

Specifications:
• MODEL - CXA800.1
• Power (watts/ch) 4 Ohm - 300x1
• Power (watts/ch) 2 Ohm - 600x1
• Power (watts/ch) 1 Ohm - 800x1
• CXRC Remote Bass Capable (sold sep.) - yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
• Frequency Response (Hz): - 25-200, +0/-1dB
• Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
• Active Crossover: - Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: - 25Hz @24dB/octave
• KickEQ™ Boost - Variable 0-6dB @40Hz

1x Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - (47VK6)

Kicker VK6 6AWG Complete Amplifier Wiring Kit w/2CH Interconnects - 47VK6

Kicker V-Series Amplifier Wiring Kits -
• Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables
• K-Series Speaker Wire and Interconnect Cables
• Heavy-Duty AFS Fuse Holder and Fuse
• Insulated Crimp Connectors, Zip Ties and other Hardware
• One Convenient Kit with Everything that You Need
• All Cables are made with Pure OFC for Max Power Transfer and Superior Clarity
• Additional Year of Warranty When Purchased with a KICKER Amp

In the box -
• 17 ft 6 AWG red power wire
• 4 ft 6 AWG gray ground wire
• Fuse holder with 80 amp fuse
• 17 ft remote wire
• 16.4 ft RCAs
• 12 ft speaker wire
• 6 6" zip ties
• 6 AWG firewall grommet
• 1x butt connector
• 4x fork terminals
• 1x red fork terminal boots
• 1x black fork terminal boots

2x Kicker 52CVT104 CVT10 CompVT 10-Inch (24cm) Subwoofer, 4 Ohm SVC - (52CVT104)

The CompVT 10-Inch Subwoofer is available as a 4Ω slimline driver.

New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKon™ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.

The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.

Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 4 SVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 87.2
MOUNTING DEPTH [in, cm]: 4-1/4, 10.8
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.5
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6

Thiele/Small Parameters
Re: 3.675 Ohm
Krm: 0.00185 Ohm
Erm: 0.995
Kxm: 0.02575 Ohm
Exm: 0.78
Cmes: 849.94
Lces: 20.055
Res: 37.375 Ohm
fs: 38.6 Hz
Mms: 144.4155 g
Mmd (Sd): 136.4885 g
Rms: 4.5485 kg/s
Cms: 0.118 mm/N
Kms: 8.485 N/mm
Bl: 13.0385 Tm
Qtp: 0.764 total Q-factor considering all losses
Qms: 7.6925 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.7565 electrical Q-factor of driver in free air considering Re only
Qts: 0.689 total Q-factor considering Re and Rms only
Vas: 22.4299 I
n0: 0.1635 reference efficiency (2 pi-radiation using Re)
Lm: 84.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 84.7 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 366.44 cm² diaphragm area
Xmax: 13 mm