Description
Included in this kit
This bundle includes a Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and a Kicker 52CVT102 CVT10 CompVT 10-Inch (24cm) Subwoofer, 2 Ohm SVC.
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQā¢, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
ā¢ Efficient Class-D amplifier
ā¢ Three-second turn-on/off delay to eliminate unwanted interference
ā¢ Variable 12dB crossovers provides control to dial in perfect sound
ā¢ KickEQā¢ 6dB variable bass boost for those additional low frequencies
ā¢ 24dB subsonic filter for protection from potentially damaging frequencies
ā¢ FIT+ā¢ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
ā¢ Accepts up to 40-volt input signal
ā¢ Small footprint for easier installation
ā¢ Compatible with CXARC Remote Bass Control
ā¢ Vertical mounting hardware included for another unique look
Specifications:
ā¢ MODEL - CXA400.1
ā¢ Power (watts/ch) 4 Ohm - 150x1
ā¢ Power (watts/ch) 2 Ohm - 300x1
ā¢ Power (watts/ch) 1 Ohm - 400x1
ā¢ CXRC Remote Bass Capable (sold sep.) - yes
ā¢ Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
ā¢ Frequency Response (Hz): - 25-200, +0/-1dB
ā¢ Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
ā¢ Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
ā¢ Active Crossover: - Variable Lo-pass 50Hzā200Hz, 12dB/octave
ā¢ Subsonic Filter: - 25Hz @24dB/octave
ā¢ KickEQā¢ Boost - Variable 0-6dB @40Hz
1x Kicker 52CVT102 CVT10 CompVT 10-Inch (24cm) Subwoofer, 2 Ohm SVC - (52CVT102)
The CompVT 10-Inch Subwoofer is available as a 2Ī© slimline driver.
New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKonā¢ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 2 SVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 87.2
MOUNTING DEPTH [in, cm]: 4-1/4, 10.8
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.5
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
Thiele/Small Parameters
Re: 2.675 Ohm
Krm: 0.00185 Ohm
Erm: 0.995
Kxm: 0.02575 Ohm
Exm: 0.78
Cmes: 849.94
Lces: 20.055
Res: 37.375 Ohm
fs: 38.6 Hz
Mms: 144.4155 g
Mmd (Sd): 136.4885 g
Rms: 4.5485 kg/s
Cms: 0.118 mm/N
Kms: 8.485 N/mm
Bl: 13.0385 Tm
Qtp: 0.764 total Q-factor considering all losses
Qms: 7.6925 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.7565 electrical Q-factor of driver in free air considering Re only
Qts: 0.689 total Q-factor considering Re and Rms only
Vas: 22.4299 I
n0: 0.1635 reference efficiency (2 pi-radiation using Re)
Lm: 84.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 84.7 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 366.44 cmĀ² diaphragm area
Xmax: 13 mm