Description
Included in this kit
This bundle includes a Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp, and a Kicker 52CVR124 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 4-ohm.
1x Kicker 46CXA4001 CXA4001 - 400-Watt Mono Class D Subwoofer Amp - (46CXA4001)
Kicker 46CXA4001 CX400.1 400 Watt RMS 1-Ohm Stable Mono Amplifier
Using a Class-D power plant, the CXA400.1 features a variable bass boost with KickEQā¢, giving you as much as a 6dB of extra bump.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality.
This CX.1 Amplifier delivers as much as 400 watts into one bass channel. See below for more details.
Features:
⢠Efficient Class-D amplifier
⢠Three-second turn-on/off delay to eliminate unwanted interference
⢠Variable 12dB crossovers provides control to dial in perfect sound
⢠KickEQ⢠6dB variable bass boost for those additional low frequencies
⢠24dB subsonic filter for protection from potentially damaging frequencies
⢠FIT+⢠(Fail-safe Integration Technology-PLUS) means it works with nearly every radio
⢠Accepts up to 40-volt input signal
⢠Small footprint for easier installation
⢠Compatible with CXARC Remote Bass Control
⢠Vertical mounting hardware included for another unique look
Specifications:
⢠MODEL - CXA400.1
⢠Power (watts/ch) 4 Ohm - 150x1
⢠Power (watts/ch) 2 Ohm - 300x1
⢠Power (watts/ch) 1 Ohm - 400x1
⢠CXRC Remote Bass Capable (sold sep.) - yes
⢠Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L) - 8-1/8, 20.6
⢠Frequency Response (Hz): - 25-200, +0/-1dB
⢠Input Sensitivity: - 250mV-10V (Low Level), 1V-40V (High Level)
⢠Signal-to-Noise Ratio: - >95dB, a-weighted, re: rated power
⢠Active Crossover: - Variable Lo-pass 50Hzā200Hz, 12dB/octave
⢠Subsonic Filter: - 25Hz @24dB/octave
⢠KickEQ⢠Boost - Variable 0-6dB @40Hz
1x Kicker 52CVR124 - CVR12 CompVR 12-Inch (30cm) Subwoofer, DVC, 4-ohm - (52CVR124)
12" CompVR 4 Ohm
The reengineered CompVR 12-Inch Subwoofer is a 4Ī© dual voice coil design, built for easy wiring.
This subwoofer uses a large-diameter, progressive-roll spider and a Santoprene surround for truly linear cone movement. All this technology creates outstanding bass in a subwoofer built to make the mirrors shake.
The CompVR Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 4 DVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 86.9
MOUNTING DEPTH [in, cm]: 6-3/8, 16.2
MOUNTING DIAMETER [in, cm]: 11, 27.9
MIN SEALED BOX VOL [cu. ft, L]: 1, 28.3
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7