Description
Included in this kit
This bundle includes a Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability, and 2x Kicker 52CVT124 CVT12 CompVT 12-Inch (30cm) Subwoofer, 4 Ohm SVC.
1x Kicker 47KEY5001 500-Watt Mono Channel Amp With Start/Stop Capability - (47KEY5001)
Kicker 47KEY5001 KEY 1-Channel DSP Smart Amplifier, 1x500W
The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using KICKERās supplied test tones, the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.
Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your trunk with ease.
The amplifier also features FIT 2+ā¢ (Fail-safe Integration Technology 2 PLUS) ā which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
Specifications -
ā¢ Power (watts/ch), 1 Ohm stereo: 500
ā¢ Power (watts/ch), 2 Ohm stereo: 300
ā¢ Power (watts/ch), 4 Ohm stereo: 150
ā¢ Microphone/Kicker EQ button: included
ā¢ Standard dimensions(H x W x L)(in, cm) 1-11/16, 4.3 x 2-3/4, 7 x 7-3/8, 18.7
ā¢ Frequency Response (Hz): 10-160
ā¢ Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
ā¢ Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
ā¢ Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
ā¢ What's in the Box: 1 - fuse holder, 1 - manual and installation hardware
2x Kicker 52CVT124 CVT12 CompVT 12-Inch (30cm) Subwoofer, 4 Ohm SVC - (52CVT124)
The CompVT 12-Inch Subwoofer is available as a 4Ī© slimline driver.
New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKonā¢ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 12, 30
IMPEDANCE [Ohms]: 4 SVC
Recommended Amplifier Power (watts RMS) 225-450
Peak Power (watts, per ANSI/CTA-2031-A) 900
SENSITIVITY [dB 1w/1m]: 87.1
MOUNTING DEPTH [in, cm]: 4-3/8, 11.1
MOUNTING DIAMETER [in, cm]: 11, 28.1
MIN SEALED BOX VOL [cu. ft, L]: 1, 27.9
MAX SEALED BOX VOL [cu. ft, L]: 4.6, 130
MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7
Thiele/Small Parameters
Re: 3.695 Ohm
Krm: 0.0024 Ohm
Erm: 0.965
Kxm: 0.02685 Ohm
Exm: 0.78
Cmes: 1103.91
Lces: 17.435
Res: 30.83 Ohm
fs: 36.35 Hz
Mms: 184.6795 g
Mmd (Sd): 170.8555 g
Rms: 5.427 kg/s
Cms: 0.104 mm/N
Kms: 9.63 N/mm
Bl: 12.934 Tm
Qtp: 0.9215 total Q-factor considering all losses
Qms: 7.7675 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.93 electrical Q-factor of driver in free air considering Re only
Qts: 0.831 total Q-factor considering Re and Rms only
Vas: 41.59095 I
n0: 0.2055 reference efficiency (2 pi-radiation using Re)
Lm: 85.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 85.675 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 530.93 cmĀ² diaphragm area
Xmax: 13 mm