Description
Included in this kit
This bundle includes 2x Kicker 52CVT104 CVT10 CompVT 10-Inch (24cm) Subwoofer, 4 Ohm SVC, and a Kicker LX850.1 850w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX8501).
2x Kicker 52CVT104 CVT10 CompVT 10-Inch (24cm) Subwoofer, 4 Ohm SVC - (52CVT104)
The CompVT 10-Inch Subwoofer is available as a 4Ī© slimline driver.
New and improved, precise KICKER engineering allows the CompVT to pound with limited space. A proprietary four-layer voice coil collaborating with SoloKonā¢ cone technology, provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
The CompVT Subwoofer works best with a sealed or ported enclosure for its substantial power handling.
Specifications
SIZE [in, cm]: 10, 25
IMPEDANCE [Ohms]: 4 SVC
Recommended Amplifier Power (watts RMS) 180-375
Peak Power (watts, per ANSI/CTA-2031-A) 750
SENSITIVITY [dB 1w/1m]: 87.2
MOUNTING DEPTH [in, cm]: 4-1/4, 10.8
MOUNTING DIAMETER [in, cm]: 9-3/16, 23.3
MIN SEALED BOX VOL [cu. ft, L]: 0.8, 22.5
MAX SEALED BOX VOL [cu. ft, L]: 3, 85
MIN VENTED BOX VOL [cu. ft, L]: 1.25, 35.4
MAX VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
Thiele/Small Parameters
Re: 3.675 Ohm
Krm: 0.00185 Ohm
Erm: 0.995
Kxm: 0.02575 Ohm
Exm: 0.78
Cmes: 849.94
Lces: 20.055
Res: 37.375 Ohm
fs: 38.6 Hz
Mms: 144.4155 g
Mmd (Sd): 136.4885 g
Rms: 4.5485 kg/s
Cms: 0.118 mm/N
Kms: 8.485 N/mm
Bl: 13.0385 Tm
Qtp: 0.764 total Q-factor considering all losses
Qms: 7.6925 mechanical Q-factor of driver in free air considering Rms only
Qes: 0.7565 electrical Q-factor of driver in free air considering Re only
Qts: 0.689 total Q-factor considering Re and Rms only
Vas: 22.4299 I
n0: 0.1635 reference efficiency (2 pi-radiation using Re)
Lm: 84.33 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom: 84.7 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
Sd: 366.44 cmĀ² diaphragm area
Xmax: 13 mm
1x Kicker LX850.1 850w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX8501) - (51LX8501)
KICKER LX850.1 Mono Amplifier
The KICKER LX-Series delivers high-powered output with precision control, offering unmatched performance for bass enthusiasts. The LX850.1 is a monoblock amplifier designed for deep, powerful bass with premium tuning flexibility. Built from the ground up with SQL design principles, this amplifier provides exceptional efficiency, crystal-clear signal processing, and advanced features for total system control.
Key Features:
- LX Remote Control (LXRC) included for fingertip bass level adjustments, real-time battery voltage monitoring, and SHOCwave2.0ā¢ digital bass restoration
- Class-D technology for high efficiency, lower current draw, longer playtimes, and reduced heat for consistent performance
- Gain-match LEDs for perfect gain settings, ensuring distortion-free sound and optimal system performance
- KickEQ+ā¢ parametric bass boost with adjustable 0ā6dB gain, center frequency, and bandwidth for precise bass control
- FIT+ā¢ technology eliminates unwanted noise and accepts low- and high-level signals up to 40V for crystal-clear sound
- Customizable appearance with a reversible center panel and 11 RGB LED accent colors to match any setup
Specifications:
- RMS Power @ 14.4V: 850W @ 1Ī©, 500W @ 2Ī©, 300W @ 4Ī©
- Dynamic Power: 1100W
- Frequency Response: 10Hz - 160Hz (+0/-1dB)
- Signal-to-Noise Ratio: >95dB (rated power), >75dB (1W output)
- Variable Electronic Crossover: LP 40Hz - 160Hz, 24dB/octave Linkwitz-Riley
- Variable Subsonic Filter: 24dB/octave Linkwitz-Riley, adjustable 10Hz - 80Hz
- KickEQ+ā¢ Parametric Bass Boost: 0 - 6dB, variable center 20Hz - 80Hz, variable bandwidth 1 - 5
- Input Sensitivity: High level 1V - 40V, Low level 125mV - 5V
- Dimensions: Height 2-3/8", Width 8-7/16", Length 9-7/16"
The KICKER LX850.1 Mono Amplifier is the perfect choice for those seeking premium bass performance, precision tuning, and advanced system control. Designed for efficiency and reliability, this amplifier delivers powerful, distortion-free low-end that brings your music to life.