Kicker 49L7X101 - SoloX L7X 10-Inch & LX1250.1 Mono Amplifier

Included in this kit

---

This bundle includes a Kicker 49L7X101 - SoloX L7X 10-Inch (25cm), 3" Coil, Ferrite Competition Subwoofer, 1-Ohm, and a Kicker LX1250.1 1250w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX12501).

1x Kicker 49L7X101 - SoloX L7X 10-Inch (25cm), 3" Coil, Ferrite Competition Subwoofer, 1-Ohm - (49L7X101)

The KICKER SoloX L7X Ferrite Competition Subwoofer brings the most advanced bass technology and unprecedented performance, from the guys who invented it for a vehicle. A motor like no other – it includes a massive, triple-stacked ferrite magnet surrounding a hyper-extended pole piece, engineered for an enormous, more linear magnetic field and amazing heat dissipation. It's ultra-deep bass at very high volume. L7X's three-inch voice coil is supported by a dual-spider suspension system, and the double-pressed pulp cone is attached to an ultra-long-throw Santoprene surround - equipped with KICKER's square cone tech and ribbed corners for continuous force and air movement. Field-Replaceable Recone Kit - Using an exclusive, surround compression system, bolt-on spider landing, and helpful alignment shims, repairing an L7X is no sweat! Features: • Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and no gluing required
• Forced Air Cooling™
• Three-inch, aluminum voice coil former
• Dual-spider suspension
• Double-pressed pulp cone
• Heavy-duty UV-resistant Santoprene surround
• Custom rubber magnet boot
• Cast-aluminum basket
• Single 8 AWG terminal and dual 8 AWG terminal block
• Triple-Stacked Ferrite Magnet
Specifications:
• Size (in, cm) - 10, 25
• Rated Impedance (Ohms) - 1 DVC
• Rec Amp Power rms - 1000-2000
• Frequency Response - 25-100
• Magnet Diameter (in, cm) - 8-11/16, 22
• Total Magnet Weight (oz, kg) - 406, 11.5
• Voice Coil Diameter (in, mm) - 3, 75
• Voice Coil Winding Width (in, mm) - 2.5, 62.5
• Top Plate Thickness (in, mm) - 0.5, 13
• Xmax (in, mm) - 1.25, 31.25
• Mounting Cutout (in, cm) - 9-5/16, 23.7
• Mounting Depth (in, cm) - 9-7/16, 24
• Recommended Vented Box Volume (Cu. Ft., L) - 2, 56.6
• Port Opening (in x in, cm x cm) - 2.5 X 12.25, 6 X 31
• Port Length (in, cm) - 38.5, 98
• Vented Enclosure Tuning Frequency (Hz) - 31

1x Kicker LX1250.1 1250w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX12501) - (51LX12501)

KICKER LX1250.1 Mono Amplifier

The KICKER LX1250.1 is built for those who demand deep, powerful bass with total control and efficiency. Designed from the ground up as part of the high-performance LX-Series, this monoblock amplifier delivers SQL-level precision with high-output power and cutting-edge features. Whether you're looking for tight, accurate bass or ground-shaking low frequencies, the LX1250.1 provides the power and customization needed to fine-tune your system.

Key Features:
- LX Remote Control (LXRC) included for fingertip bass level adjustment, real-time battery voltage monitoring, and SHOCwave2.0™ digital bass restoration
- Class-D design for efficient power consumption, longer playtimes, lower heat generation, and reliable performance
- Gain-match LEDs ensure perfect gain settings for distortion-free sound and optimal system tuning
- KickEQ+™ parametric bass boost with adjustable 0–6dB gain, center frequency, and bandwidth for total bass customization
- FIT+™ technology eliminates unwanted noise and accepts low- and high-level signals up to 40V for superior signal clarity
- Customizable appearance with a reversible center panel and 11 RGB LED accent colors to match any setup

Specifications:
- RMS Power @ 14.4V: 1250W @ 1Ω, 750W @ 2Ω, 400W @ 4Ω
- Dynamic Power: 1600W
- Frequency Response: 10Hz - 160Hz (+0/-1dB)
- Signal-to-Noise Ratio: >95dB (rated power), >75dB (1W output)
- Variable Electronic Crossover: LP 40Hz - 160Hz, 24dB/octave Linkwitz-Riley
- Variable Subsonic Filter: 24dB/octave Linkwitz-Riley, adjustable 10Hz - 80Hz
- KickEQ+™ Parametric Bass Boost: 0 - 6dB, variable center 20Hz - 80Hz, variable bandwidth 1 - 5
- Input Sensitivity: High level 1V - 40V, Low level 125mV - 5V
- Dimensions: Height 2-3/8", Width 8-7/16", Length 9-7/16"

The KICKER LX1250.1 Mono Amplifier is the ideal solution for those who want precision tuning, powerful bass, and advanced system control. With high-efficiency performance and premium features, this amplifier delivers deep, controlled low-end frequencies with unmatched clarity and impact.