Kicker SOLOX 49L7X122 12" Subwoofer & Enclosure with 51LX16501 Mono Amp Bundle

Included in this kit

---

This bundle includes a Kicker 49VUL7X12 SOLOX 12" Single Unloaded Enclosure, a Kicker LX1650.1 1650w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX16501), and a Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm.

1x Kicker 49VUL7X12 SOLOX 12" Single Unloaded Enclosure - (49VUL7X12)

It’s a KICKER first, and only KICKER can provide the factory-tuned bulk to house SoloX! Pre-wired, terminals… just put the sub in the hole and connect!

OPTIMIZED
These are rock-solid and optimized for SoloX max performance. Ready for pounding once the subwoofer is installed.

TUNED FOR MAX SPL OUTPUT
The 12-inch enclosures are tuned at 31Hz for max SPL output at the most desired frequency. All you need is the L7X12 sub!

MASSIVE FLARED PORT
They include a double-layered baffle with extensive internal bracing and a huge, front-facing flared port for controlled air velocity.

DID SOMEONE SAY BIRCH?
They’re constructed from heavy-duty birch plywood with 45-degree corner bracing, large brass lugs in the terminal cup, and extra-large mounting feet.

1x Kicker LX1650.1 1650w Mono Class-D Subwoofer Amplifier with Smart Bass (51LX16501) - (51LX16501)

KICKER LX1650.1 Mono Amplifier

The KICKER LX1650.1 is built for those who demand extreme power and precision bass control. As part of the LX-Series, this monoblock amplifier is designed from the ground up to deliver SQL-level performance with high-efficiency Class-D technology. With advanced features like SHOCwave2.0™ digital bass restoration, precision tuning, and extensive system protection, the LX1650.1 offers unmatched bass performance for any setup.

Key Features:
- LX Remote Control (LXRC) included for fingertip bass level adjustment, SHOCwave2.0™ bass restoration, and real-time battery voltage monitoring
- Class-D design for efficient power consumption, lower heat output, and extended playtimes
- Gain-match LEDs ensure accurate gain settings for distortion-free audio and optimal system performance
- KickEQ+™ parametric bass boost with adjustable 0–6dB gain, center frequency, and bandwidth for precise bass customization
- FIT+™ technology eliminates unwanted noise and accepts low- and high-level signals up to 40V for crystal-clear signal processing
- Customizable appearance with a reversible center panel and 11 RGB LED accent colors for a personalized look

Specifications:
- RMS Power @ 14.4V: 1650W @ 1Ω, 1000W @ 2Ω, 550W @ 4Ω
- Dynamic Power: 2200W
- Frequency Response: 10Hz - 160Hz (+0/-1dB)
- Signal-to-Noise Ratio: >95dB (rated power), >75dB (1W output)
- Variable Electronic Crossover: LP 40Hz - 160Hz, 24dB/octave Linkwitz-Riley
- Variable Subsonic Filter: 24dB/octave Linkwitz-Riley, adjustable 10Hz - 80Hz
- KickEQ+™ Parametric Bass Boost: 0 - 6dB, variable center 20Hz - 80Hz, variable bandwidth 1 - 5
- Input Sensitivity: High level 1V - 40V, Low level 125mV - 5V
- Dimensions: Height 2-3/8", Width 8-7/16", Length 9-7/16"

The KICKER LX1650.1 Mono Amplifier is the ultimate choice for those seeking powerful, distortion-free bass with advanced control options. Designed for efficiency, reliability, and customization, this amplifier delivers deep, hard-hitting low frequencies with unparalleled clarity and impact.

1x Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm - (49L7X122)

Kicker 49L7X122 - SoloX L7X 12-Inch (30cm), 3" Coil, Ferrite Competition Subwoofer, 2-Ohm The KICKER SoloX L7X Ferrite Competition Subwoofer brings the most advanced bass technology and unprecedented performance, from the guys who invented it for a vehicle. A motor like no other – it includes a massive, triple-stacked ferrite magnet surrounding a hyper-extended pole piece, engineered for an enormous, more linear magnetic field and amazing heat dissipation. It's ultra-deep bass at very high volume. L7X's three-inch voice coil is supported by a dual-spider suspension system, and the double-pressed pulp cone is attached to an ultra-long-throw Santoprene surround - equipped with KICKER's square cone tech and ribbed corners for continuous force and air movement. Field-Replaceable Recone Kit - Using an exclusive, surround compression system, bolt-on spider landing, and helpful alignment shims, repairing an L7X is no sweat! Features: • Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and no gluing required
• Forced Air Cooling™
• Three-inch, aluminum voice coil former
• Dual-spider suspension
• Double-pressed pulp cone
• Heavy-duty UV-resistant Santoprene surround
• Custom rubber magnet boot
• Cast-aluminum basket
• Single 8 AWG terminal and dual 8 AWG terminal block
• Triple-Stacked Ferrite Magnet
Specifications:
• Size (in, cm) - 12, 30
• Rated Impedance (Ohms) - 2 DVC
• Rec Amp Power rms - 1000-2000
• Frequency Response - 20-100
• Magnet Diameter (in, cm) - 8-11/16, 22
• Total Magnet Weight (oz, kg) - 406, 11.5
• Voice Coil Diameter (in, mm) - 3, 75
• Voice Coil Winding Width (in, mm) - 2.5, 62.5
• Top Plate Thickness (in, mm) - 0.5, 13
• Xmax (in, mm) - 1.25, 31.25
• Mounting Cutout (in, cm) - 11-1/16, 28.1
• Mounting Depth (in, cm) - 10-1/8, 25.7
• Recommended Vented Box Volume (Cu. Ft., L) - 3, 84.9
• Port Opening (in x in, cm x cm) - 3.5 x 13, 9 x 33
• Port Length (in, cm) - 36.5, 93
• Vented Enclosure Tuning Frequency (Hz) - 31